ആമുഖം
This manual provides essential information for the installation, operation, and maintenance of your PRAXIS Cadet M30 DM 32T Aluminium Crankset. Please read this manual thoroughly before use to ensure proper function and longevity of your product.
The PRAXIS Cadet M30 DM 32T is an aluminium crankset designed for mountain bikes. It features a direct mount (DM) interface for a 32-tooth chainring (chainring sold separately) and requires a Praxis M30 bottom bracket for compatibility.
ഉൽപ്പന്നം കഴിഞ്ഞുview
Image: The PRAXIS Cadet M30 DM crankset, showing both crank arms. The left crank arm features the M30 spindle, while the right crank arm is designed for direct mount chainrings.
Key features of the PRAXIS Cadet M30 DM 32T Crankset include:
- Aluminium construction for durability and light weight.
- Direct Mount (DM) interface compatible with SRAM 3-bolt chainrings (chainring sold separately).
- Designed for use with Praxis M30 bottom brackets (sold separately).
- Total item weight approximately 558g (crankset only).
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for the performance and safety of your crankset. If you are unsure about any steps, it is recommended to seek assistance from a qualified bicycle mechanic.
ആവശ്യമായ ഉപകരണങ്ങൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല):
- ടോർക്ക് റെഞ്ച്
- Hex keys (various sizes, typically 8mm for crank bolt)
- Bottom bracket tool compatible with Praxis M30 bottom brackets
- ഗ്രീസ്
- Thread locker (optional, for chainring bolts)
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:
- Prepare Bottom Bracket: Ensure your Praxis M30 bottom bracket is correctly installed and torqued to the manufacturer's specifications in your bicycle frame. Apply a thin layer of grease to the spindle bore of the bottom bracket.
- ചെയിൻറിംഗ് ഇൻസ്റ്റാൾ ചെയ്യുക: Attach your direct mount chainring (SRAM 3-bolt compatible) to the right crank arm. Ensure the chainring is oriented correctly. Torque the chainring bolts to the manufacturer's recommended specifications.
- Install Right Crank Arm: Carefully slide the right crank arm (with chainring attached) through the drive-side bearing of the bottom bracket.
- Install Left Crank Arm: Align the splines of the left crank arm with the splines on the spindle extending from the bottom bracket. Push the left crank arm onto the spindle.
- Tighten Crank Bolt: Insert the main crank bolt into the left crank arm. Using a torque wrench, tighten the crank bolt to the specified torque. Refer to the Praxis M30 bottom bracket instructions for the exact torque value, typically around 40-50 Nm (30-37 ft-lbs). Overtightening or undertightening can cause damage or unsafe operation.
- പ്ലേ പരിശോധിക്കുക: After tightening, check for any lateral play in the crankset. The crank arms should spin freely without any side-to-side movement.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The PRAXIS Cadet M30 DM 32T crankset is designed for standard bicycle operation. Once installed, ensure all components are secure before riding.
- പതിവ് പരിശോധനകൾ: Before each ride, quickly check that the crank arms are securely attached and there is no excessive play.
- Chainring Compatibility: Ensure your chainring is compatible with your bicycle's drivetrain (e.g., 1x, 10-speed, 11-speed, 12-speed).
- റൈഡിംഗ് വ്യവസ്ഥകൾ: This crankset is designed for mountain biking. Avoid using it in conditions or for activities beyond its intended design, such as extreme downhill racing without proper additional components.
മെയിൻ്റനൻസ്
Regular maintenance will extend the life of your crankset and ensure optimal performance.
- വൃത്തിയാക്കൽ: Clean the crankset regularly with mild soap and water, especially after riding in dirty or wet conditions. Avoid high-pressure washing directly on bearings.
- പരിശോധന: Periodically inspect the crank arms for any signs of damage, cracks, or bending. Check the chainring teeth for wear.
- ബോൾട്ട് ടോർക്ക്: Re-check the torque of the main crank bolt and chainring bolts periodically (e.g., every 100-200 km or after a few hard rides). Loose bolts can lead to damage or failure.
- താഴെയുള്ള ബ്രാക്കറ്റ്: The Praxis M30 bottom bracket should be serviced according to its own manual. This typically involves cleaning and re-greasing bearings or replacement if worn.
- ലൂബ്രിക്കേഷൻ: While the crankset itself doesn't require lubrication, ensure your chain and chainring are properly lubricated according to your chain manufacturer's recommendations.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Crank arms feel loose or have play. | Main crank bolt is loose. | Tighten the main crank bolt to the specified torque (refer to Praxis M30 BB manual). |
| Clicking or creaking sound from the crank area. | Loose crank bolt, worn bottom bracket, loose chainring bolts, or insufficient grease. | Check and re-torque all bolts. Inspect and service/replace bottom bracket. Ensure proper grease application during installation. |
| Chainring wobbles. | Loose chainring bolts or damaged chainring/crank interface. | Check and tighten chainring bolts. Inspect chainring and crank arm for damage; replace if necessary. |
| Difficulty shifting (if using with a front derailleur). | Incorrect chainline or chainring wear. | Verify chainline is correct for your frame and bottom bracket. Replace worn chainring. |
If problems persist after attempting these solutions, consult a professional bicycle mechanic.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡലിൻ്റെ പേര് | Cadet M30 DM 32T |
| ഇനം മോഡൽ നമ്പർ | G2-C175 |
| മെറ്റീരിയൽ | അലുമിനിയം |
| ഭാരം | Approximately 558 g (crankset only) |
| Chainring Interface | Direct Mount (SRAM 3-bolt compatible) |
| താഴെയുള്ള ബ്രാക്കറ്റ് അനുയോജ്യത | Praxis M30 (required, sold separately) |
| നിറം | കറുപ്പ് |
| പാഴ്സൽ അളവുകൾ | 20 x 20 x 20 സെ.മീ |
| യു.പി.സി | 850009369635 |
വാറൻ്റിയും പിന്തുണയും
For warranty information and support, please refer to the official Praxis Cycles webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
നിർമ്മാതാവ്: പ്രാക്സിസ്
ആദ്യം ലഭ്യമായ തീയതി: ജൂലൈ 4, 2023
