Brook Universal Fighting Board (UFB) Instruction Manual

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Brook Universal Fighting Board (UFB) is a versatile Printed Circuit Board (PCB) designed to provide multi-console compatibility for arcade sticks and fight sticks. It eliminates the need for multiple fight sticks for different gaming platforms, offering a unified solution for competitive and casual players.

പ്രധാന സവിശേഷതകൾ:

• Multi-console support PS5 (With UFB-UP5)/Xb Series X/S/ Xb One / Xb 360 / PS4 / PS3 / PC / Wii U / PS Mini / MD mini. Backward-compatible PS4 games are playable on your PS5 console.
• Compatible with Brook UFB-UP5 upgrade Kit. Connect UFB-UP5 with Brook UFB, you can play PS5 fighting games on your Fightsticks.
• Build in SOCD cleaner. Headers are included. PS4 controller touchpad button simulation.
• No 8-minutes timeout issue on PS4. Effortless installation(Screw terminal block for easy connections) and Upgradable firmware.
• Console auto detection(PS3 / PS4 / Xb 360 / Xb One) and Console manual selection(PS4 / PS3 / Xb One / Xb 360 / Wii U / PS classic / MD mini).

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

The Brook Universal Fighting Board is designed for straightforward installation into most arcade stick enclosures.

ആവശ്യമായ ഉപകരണങ്ങളും വസ്തുക്കളും:

• സ്ക്രൂഡ്രൈവർ സെറ്റ് (ഫിലിപ്സും ഫ്ലാറ്റ്ഹെഡും)
• Wire strippers/crimpers (if not using pre-terminated wires)
• Fight stick enclosure
• Joystick and pushbuttons
• Compatible wiring harness (e.g., Brook Fighting Board Cable, sold separately)
• USB cable (Type-B to Type-A)

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. Prepare the Enclosure: Ensure your fight stick enclosure is open and all existing wiring is disconnected or removed if you are replacing an old PCB.
2. Mount the UFB: Securely mount the Brook UFB inside the enclosure using appropriate screws or standoffs. Ensure it is placed in a location that allows for easy access to its screw terminals and USB port.



3. ജോയ്‌സ്റ്റിക്ക് ബന്ധിപ്പിക്കുക: Connect the 5-pin joystick harness to the J3 connector on the UFB. Ensure correct orientation.
4. Connect Buttons: Connect each pushbutton's signal wire to its corresponding screw terminal (e.g., 1P, 2P, 3P, 4P, etc.) on the UFB. Connect all ground wires from the buttons and joystick to the GND terminals. The UFB's screw terminal block facilitates easy connections without soldering.
5. USB ബന്ധിപ്പിക്കുക: Plug a USB Type-B cable into the UFB's USB port and route the other end (Type-A) out of the enclosure to connect to your console or PC.
6. എൻക്ലോഷർ അടയ്ക്കുക: Once all connections are verified, carefully close and secure your fight stick enclosure.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Brook Universal Fighting Board features automatic console detection for most supported systems.

Automatic Console Detection:

Simply connect your fight stick to the desired console (PS3, PS4, Xbox 360, Xbox One) via the USB cable. The UFB will automatically detect the console and configure itself for use.

Manual Console Selection:

For certain consoles (Wii U, PS Classic, MD mini) or if automatic detection fails, you can manually select the console mode by holding specific buttons during power-up:

• PS4: പിടിക്കുക 1P (Light Punch) button.
• PS3: പിടിക്കുക 1K (Light Kick) button.
• Xbox One: പിടിക്കുക 2P (Medium Punch) button.
• Xbox 360: പിടിക്കുക 2K (Medium Kick) button.
• Wii U: പിടിക്കുക 3P (Heavy Punch) button.
• PS Classic / MD Mini: പിടിക്കുക 3K (Heavy Kick) button.

Release the button once the fight stick is connected and recognized by the console.

PS4 Touchpad Simulation:

The UFB supports touchpad button simulation for PS4 games. Refer to the specific wiring diagram for your setup to enable this feature.

ടർബോ ഫംഗ്ഷൻ:

The UFB supports turbo functionality. Consult the official Brook website or the detailed PDF manual for specific button combinations to activate and configure turbo settings.

മെയിൻ്റനൻസ്

The Brook UFB is a durable component, but proper care ensures its longevity.

• Keep the PCB clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the board to extreme temperatures or moisture.
• Ensure all wire connections are secure and free from strain. Periodically check connections for looseness.

ട്രബിൾഷൂട്ടിംഗ്

പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും:

Fight Stick Not Recognized by Console:

• യുഎസ്ബി കണക്ഷൻ പരിശോധിക്കുക: Ensure the USB cable is securely connected to both the UFB and the console/PC. Try a different USB port or cable.
• Verify Console Mode: If automatic detection fails, try manually selecting the console mode by holding the appropriate button during connection (refer to "Manual Console Selection" above).
• ഫേംവെയർ അപ്ഡേറ്റ് ചെയ്യുക: Ensure the UFB firmware is up to date. Visit the official Brook webഏറ്റവും പുതിയ ഫേംവെയറിനും അപ്‌ഡേറ്റ് നിർദ്ദേശങ്ങൾക്കുമുള്ള സൈറ്റ്.

Buttons or Joystick Not Responding:

• വയറിംഗ് പരിശോധിക്കുക: Inspect all wire connections from the joystick and buttons to the UFB's screw terminals. Ensure they are correctly wired and securely fastened.
• പരീക്ഷണ ഘടകങ്ങൾ: If possible, test individual buttons and the joystick with a multimeter to ensure they are functioning correctly.
• ഗ്രൗണ്ട് കണക്ഷനുകൾ: Verify that all ground wires are properly connected to the GND terminals on the UFB.

8-Minute Timeout on PS4:

• The Brook UFB is designed to prevent the 8-minute timeout issue on PS4. If you experience this, ensure your UFB is genuine and its firmware is updated to the latest version.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

വാറൻ്റി വിവരങ്ങൾ:

For detailed warranty information regarding your Brook Universal Fighting Board, please refer to the official Brook webസൈറ്റിൽ പ്രവേശിക്കുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി നേരിട്ട് ബന്ധപ്പെടുക.

സാങ്കേതിക സഹായം:

If you encounter any issues not covered in this manual or require further assistance, please visit the official Brook support page or contact their technical support team.

ഔദ്യോഗിക ഉപയോക്തൃ മാനുവൽ (PDF): PDF മാനുവൽ ഡൗൺലോഡ് ചെയ്യുക

Brook Store: Visit Brook Store on Amazon