ആമുഖം
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your HVAC 4UXC2018A10N0AA 18,000 BTU Indoor Multi Split Cassette Type Heat Pump. Please read this manual thoroughly before installation and use, and keep it for future reference. This unit is designed to provide both heating and cooling for indoor environments.
സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: ഇലക്ട്രിക് ഷോക്ക് സാധ്യത
MAY CAUSE INJURY OR DEATH:
DISCONNECT ALL ELECTRIC POWER SUPPLY BEFORE SERVICING.
Always ensure that the main power supply to the unit is disconnected before performing any installation, maintenance, or troubleshooting. Only qualified personnel should perform electrical work and installation of this unit. Failure to follow these instructions can result in serious injury or death.
Do not use the wired controller or the heat pump unit in environments with heavy humidity. Excessive humidity can damage the electronic components and pose a safety risk.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The installation of this multi-split cassette type heat pump requires professional expertise. It is highly recommended that installation be performed by a certified HVAC technician to ensure proper function, safety, and compliance with local building codes.
അൺബോക്സിംഗും പരിശോധനയും
Carefully unbox the unit and inspect for any signs of shipping damage. Report any damage to your supplier immediately.
This image shows the 4UXC2018A10N0AA indoor multi-split cassette type heat pump unit, still secured within its protective foam packaging, ready for installation. The unit's compact square design is visible, along with some internal components and wiring.
മുകളിൽ നിന്ന് താഴേക്ക് view of the 4UXC2018A10N0AA heat pump unit, still in its shipping foam. A clear plastic bag containing accessories is visible in the center, along with various connection points on the side of the unit.
This image displays a clear plastic bag containing various accessories for the heat pump, including what appears to be insulation, wiring, and possibly mounting hardware, all neatly packed within the unit's shipping container.
Ensure all components, including the wired controller and any accessories, are present before proceeding with installation.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Your heat pump is controlled by a wired LCD controller, providing precise control over the unit's functions.
Close-up of the LCD wired controller. The screen displays a warning: 'It is prohibited to use at heavy humidity environment'. Buttons for 'Enter/Cancel', 'Fan', 'Mode', 'Timer', and 'On/Off' are clearly visible, indicating its function for controlling the heat pump.
കൺട്രോളർ പ്രവർത്തനങ്ങൾ:
- ഓൺ/ഓഫ്: യൂണിറ്റ് ഓണാക്കാനോ ഓഫാക്കാനോ അമർത്തുക.
- മോഡ്: Cycle through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- ഫാൻ: Adjust fan speed settings (e.g., Low, Medium, High, Auto).
- ടൈമർ: Set programmed on/off times for automated operation.
- Enter/Cancel: Confirm selections or cancel current operations.
Note: As indicated on the controller, avoid using the unit in environments with heavy humidity to prevent damage.
മെയിൻ്റനൻസ്
Regular maintenance is crucial for the longevity and efficient operation of your heat pump. Always disconnect power before performing any maintenance.
- ഫിൽട്ടർ വൃത്തിയാക്കൽ: Regularly clean or replace air filters to ensure optimal airflow and air quality. Refer to the full installation manual for filter access.
- കോയിൽ ക്ലീനിംഗ്: Indoor and outdoor coils should be inspected and cleaned periodically by a qualified technician.
- ഡ്രെയിനേജ് പരിശോധന: Ensure the condensate drain line is clear and free of obstructions to prevent water overflow.
- പ്രൊഫഷണൽ പരിശോധന: Schedule annual professional inspections and servicing to maintain peak performance and identify potential issues early.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your heat pump, refer to the following common problems and solutions. For complex issues, contact a certified HVAC technician.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| യൂണിറ്റ് ഓണാക്കുന്നില്ല | No power, tripped circuit breaker, controller issue. | Check power supply, reset breaker, ensure controller is connected and powered. |
| ആവശ്യത്തിന് ചൂടാക്കൽ/തണുപ്പിക്കൽ ഇല്ല | Dirty air filter, blocked outdoor unit, low refrigerant. | Clean/replace filter, clear obstructions, contact technician for refrigerant check. |
| അസാധാരണമായ ശബ്ദങ്ങൾ | അയഞ്ഞ ഭാഗങ്ങൾ, ഫാൻ തടസ്സം, കംപ്രസർ പ്രശ്നം. | Inspect for loose components, clear obstructions, contact technician. |
| വെള്ളം ചോർച്ച | അടഞ്ഞ ഡ്രെയിൻ ലൈൻ, അനുചിതമായ ഇൻസ്റ്റാളേഷൻ. | Check and clear drain line, contact technician for inspection. |
സ്പെസിഫിക്കേഷനുകൾ
Refer to the following technical specifications for your HVAC 4UXC2018A10N0AA heat pump unit.
A detailed label showing the technical specifications of the 4UXC2018A10N0AA model. Key information includes Model Number, Rated Voltage (208/230V/1), Rated Frequency (60 Hz), Cooling Capacity (17100 Btu/h), Heating Capacity (18400 Btu/h), Refrigerant (R410A), and electrical warnings regarding the risk of electric shock.
| സ്പെസിഫിക്കേഷൻ | മൂല്യം |
|---|---|
| മോഡൽ നമ്പർ | 4UXC2018A10N0AA |
| റേറ്റുചെയ്ത വോളിയംtage | 208/230V/1 |
| റേറ്റുചെയ്ത ഫ്രീക്വൻസി | 60 Hz |
| തണുപ്പിക്കൽ ശേഷി | 17,100 Btu/hr |
| ചൂടാക്കൽ ശേഷി | 18,400 Btu/hr |
| Input Fan Motor Amp | 0.5എ |
| ഡിസൈൻ മർദ്ദം (ഉയർന്നത്) | 550 PSIG |
| ഡിസൈൻ മർദ്ദം (കുറഞ്ഞത്) | 240 PSIG |
| റഫ്രിജറൻ്റ് | R410A |
| Max Fuse Size/Fusible Max. | 15 എ |
| Max Ckt,Bkr Size/Disjoncteur Max. (Hacr Type Per Nec) | 15 എ |
| മിനി. സർക്യൂട്ട് Ampഒരു നഗരം | 1.0 എ |
| മൊത്തത്തിലുള്ള അളവുകൾ | 9.4"H X 23.5"W X 26.2"D |
| ഭാരം | 44 പൗണ്ട് |
| യു.പി.സി | 746213241099 |
| ASIN | B08HNDLC31 |
| ആദ്യ തീയതി ലഭ്യമാണ് | സെപ്റ്റംബർ 8, 2020 |
For detailed serial number information, refer to the product packaging:
A shipping label affixed to the product packaging, showing the model number '4UXC2018A10N0A' and a serial number '141201390X'. It also identifies the product as a 'MULTI SPLIT HEAT PUMP'.
സീരിയൽ നമ്പർ: 141201390X
ഉൽപ്പന്ന കോഡ്: 1P4UXC2018A10N0A
വാറൻ്റിയും പിന്തുണയും
For warranty information, please refer to the documentation provided with your purchase or contact your authorized HVAC dealer. Warranty terms and conditions may vary.
For technical support, service, or to locate an authorized service provider, please contact the manufacturer or your point of purchase. Ensure you have your model number (4UXC2018A10N0AA) and serial number ready when contacting support.
