Nilight 4 Inch 60W LED Pods with 2 Inch Tow Hitch Mounting Brackets User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Nilight 4 Inch 60W LED Pods with 2 Inch Tow Hitch Mounting Brackets are designed to provide powerful illumination for various vehicles, including pickups, ATVs, SUVs, trucks, trailers, and boats. These lights are ideal for backup reverse lighting and general rear illumination, enhancing visibility in dark conditions.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• തെളിച്ചം: Powerful 60W LED light bar with high-quality LED chips and a clear PC lens, emitting 6000K pure white light.
• ബീം തരം: Appropriate combination of spot beam and flood beam for wide spread and further distance illumination.
• ഈട്: High-quality aluminum alloy material and advanced production process for impact resistance and anti-corrosion.
• അനുയോജ്യത: Designed for most trucks, SUVs, trailers, or RVs with a 2-inch towing hitch, creating extra mounting points for easy installation of LED cubic pods.

Figure 1: Nilight 4 Inch 60W LED Pods with 2 Inch Tow Hitch Mounting Brackets.

2. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 2 x 60W LED Pods
• 1 x 2-inch Tow Hitch Mounting Bracket
• Mounting Hardware (bolts, nuts, washers, Allen wrench)

Figure 2: Package contents and dimensions of the LED pods and mounting bracket.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section provides instructions for installing the Nilight LED Pods with the tow hitch mounting bracket. Ensure your vehicle has a 2-inch towing hitch receiver.

3.1 പ്രീ-ഇൻസ്റ്റലേഷൻ പരിശോധന

• Ensure the tow hitch receiver has sufficient clearance (more than 0.8 inches) around the chain loops for the bracket to fit properly. Some vehicle models, particularly certain Ram 2500 (2024) or Class 4/5 hitches, may require modifications to the bracket due to chain loop interference.
• Gather necessary tools: Wrenches, wire strippers, electrical tape, and potentially additional wiring if the included wires are too short for your application.

Figure 3: Ensure adequate clearance around the tow hitch receiver for proper bracket fitment.

3.2 Mounting the Bracket and LED Pods

1. Attach LED Pods to Bracket: Securely fasten each LED pod to the tow hitch mounting bracket using the provided bolts, nuts, and washers. Ensure the pods are oriented correctly for your desired light spread.
2. Insert Bracket into Hitch Receiver: Slide the tow hitch mounting bracket into your vehicle's 2-inch tow hitch receiver.
3. സുരക്ഷിത ബ്രാക്കറ്റ്: Use the hitch pin (not included, typically part of your vehicle's hitch system) to secure the bracket firmly in the receiver.

Figure 4: The bracket mounts directly to the tow hitch receiver without drilling.

3.3 Wiring the LED Pods

The LED pods require a 12V DC power source. For backup reverse lights, connect them to your vehicle's reverse light circuit. For auxiliary lighting, a separate switch and wiring harness (not included with this specific package, but available separately) may be used.

• വയറുകൾ തിരിച്ചറിയുക: The LED pods typically have a red wire (positive) and a black wire (negative/ground).
• പവറിലേക്ക് ബന്ധിപ്പിക്കുക: Connect the red wire to the positive (+) terminal of your chosen power source (e.g., reverse light wire). Connect the black wire to a suitable ground point on the vehicle chassis.
• സുരക്ഷിത കണക്ഷനുകൾ: Ensure all electrical connections are secure and insulated to prevent short circuits and corrosion.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and wired, the Nilight LED Pods will operate based on their connection. If wired to the reverse lights, they will activate automatically when the vehicle is put into reverse gear. If wired to a separate switch, they can be manually turned on and off.

• ബീം അഡ്ജസ്റ്റ്മെന്റ്: The LED pods feature an adjustable bracket, allowing you to angle the lights up or down by approximately 45 degrees to optimize the light spread for your specific needs.
• ദൃശ്യപരത: These lights provide significant illumination, greatly improving visibility when backing up or in low-light conditions.

Figure 5: The adjustable bracket allows for precise beam direction. Figure 6: Examples of installed LED pods demonstrating their bright output.

5. പരിപാലനം

The Nilight LED Pods are designed for durability and minimal maintenance. Regular checks can help ensure optimal performance.

• വൃത്തിയാക്കൽ: Periodically clean the PC lens with a soft cloth and mild soap to remove dirt and debris that may obstruct light output. Avoid abrasive cleaners.
• കണക്ഷൻ പരിശോധന: Inspect wiring connections for any signs of wear, corrosion, or looseness. Re-secure or re-insulate as needed.
• ബ്രാക്കറ്റ് പരിശോധന: Check the mounting bracket and hardware for tightness, especially after off-road use or heavy vibrations.
• വാട്ടർപ്രൂഫ് ഡിസൈൻ: The lights feature a waterproof design, but avoid prolonged submersion unless specifically rated for it. The product is designed to withstand various weather conditions.

Figure 7: The robust construction ensures durability against shock, water, and scratches.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Nilight LED Pods, refer to the following common troubleshooting steps:

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

Nilight products are designed for reliability and performance. For specific warranty details and customer support, please refer to the official Nilight webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

You can visit the official Nilight Store for more information: Nilight Store on Amazon