ആമുഖം
Thank you for choosing the Yaheetech 7.5ft Pre-lit Spruce Artificial Hinged Christmas Pine Tree. This manual provides essential information for the safe assembly, operation, and maintenance of your new Christmas tree. Please read all instructions carefully before setup and retain this manual for future reference.
സുരക്ഷാ നിർദ്ദേശങ്ങൾ
- അസംബ്ലിക്ക് മുമ്പ് എല്ലാ ഭാഗങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.
- Always assemble the tree on a flat, stable surface to prevent tipping.
- Keep children and pets away from the tree during assembly.
- Do not overload electrical outlets. Ensure the tree's power cord is not pinched or damaged.
- Unplug the tree from the power source when not in use or before performing any maintenance.
- Do not place the tree near heat sources or open flames.
- Use only the provided power adapter and lights.
- If any lights do not work, check for loose bulbs or connections. Spare bulbs may be included and are attached by the plugs.
പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:
- Tree Sections (typically 3 sections for 7.5ft tree: Part A, Part B, Part C)
- മെറ്റൽ സ്റ്റാൻഡ്
- Eyebolts for Stand (3 pieces)
- Protective Caps for Stand Feet (4 pieces)
- Spare Bulbs (attached near light plugs)
Image: Components of the Yaheetech Christmas tree, showing the three main sections and the stand.
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
Follow these steps to assemble your Christmas tree:
- സ്റ്റാൻഡ് കൂട്ടിച്ചേർക്കുക:
Unfold the metal stand into a cross shape. Insert the eyebolts into the holes on the stand and tighten them to secure the stand. Place the protective caps on the feet of the stand to prevent scratches on your floor. - Insert the Bottom Section (Part A):
Carefully insert the largest tree section (Part A) into the center hole of the assembled stand. Ensure it is firmly seated. - Insert the Middle Section (Part B):
Place the middle tree section (Part B) into the top of Part A. Align the sections properly. - Insert the Top Section (Part C):
Insert the smallest tree section (Part C) into the top of Part B. - ലൈറ്റുകൾ ബന്ധിപ്പിക്കുക:
Locate the light connectors on each section. Connect the corresponding plugs to ensure all pre-assembled lights illuminate. - Fluff and Shape the Branches:
Starting from the bottom section, gently pull apart and spread out each branch and individual tip to create a full and natural appearance. Ensure all small branches are expanded in a V-shape. This process may take 1.5-2 hours for a 7.5ft tree to achieve optimal fullness.
Image: The foldable metal stand with protective caps on its feet.
Image: Diagram showing the three sections of the tree trunk for simple assembly.
Image: Close-up of the pre-assembled warm white lights on the tree branches.
Image: A visual comparison of the tree before and after the branches have been fluffed and shaped.
Video: Official Yaheetech video demonstrating the simple setup process for the Christmas tree.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once assembled and plugged in, your Yaheetech Pre-lit Christmas Tree will illuminate with warm white lights. There are no additional controls for the lights; they are designed to be continuously on when plugged into a power source.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Dust the tree periodically with a soft, dry cloth. Do not use liquid cleaners.
- ലൈറ്റ് മാറ്റിസ്ഥാപിക്കൽ: If a light bulb burns out, replace it with a spare bulb of the same type and wattage. Spare bulbs are typically attached near the light plugs.
- സംഭരണം: Before storing, ensure the tree is completely unplugged and dry. Gently compress the branches and disassemble the tree sections in reverse order of assembly. Store all parts in the original box or a suitable storage container in a cool, dry place away from direct sunlight.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലൈറ്റുകൾ പ്രവർത്തിക്കുന്നില്ല | Loose connection, burnt-out bulb, power outage. | Check all light connections. Replace any burnt-out bulbs. Ensure the power outlet is functional. |
| Tree is wobbly | Stand not fully secured, sections not properly aligned. | Ensure eyebolts on the stand are tightened. Re-seat tree sections to ensure they are fully inserted and aligned. |
| Branches appear sparse | Insufficient fluffing. | Spend more time fluffing each individual branch and tip, spreading them out to fill gaps. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | യാഹീടെക് |
| മോഡൽ നമ്പർ | HWOA-100/2FR(0.2A) |
| ഉൽപ്പന്ന അളവുകൾ | 52"D x 52"W x 90"H (7.5ft height) |
| നിറം | പച്ച |
| മെറ്റീരിയൽ | ലോഹം, പോളി വിനൈൽ ക്ലോറൈഡ് (പിവിസി) |
| ഇനത്തിൻ്റെ ഭാരം | 29.4 പൗണ്ട് |
| ടിപ്പ് എണ്ണം | 1354 |
| ബിൽറ്റ്-ഇൻ ലൈറ്റ് | അതെ |
| ഇളം നിറം | ചൂടുള്ള വെള്ള |
| പ്രത്യേക ഫീച്ചർ | Bendable Branch, Prelit |
| അസംബ്ലി ആവശ്യമാണ് | അതെ |
Image: Detailed dimensions of the 7.5ft Christmas tree.
വാറൻ്റി & പിന്തുണ
This product is covered by the standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Yaheetech customer support. If you encounter any issues or have questions regarding your product, please visit the official Yaheetech webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ സഹായത്തിനായി അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.
