ടെക്നക്സ് ടിഎക്സ്-156

Technaxx TX-156 Solar Security Camera User Manual

Model: TX-156 | Brand: Technaxx

ആമുഖം

The Technaxx TX-156 is a solar-powered outdoor security camera designed for reliable surveillance with integrated motion detection and LED lighting. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your TX-156 camera to ensure optimal performance and longevity.

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

Technaxx TX-156 camera and included accessories: MicroUSB cable, mounting belt, screws, and anchors.

ചിത്രം 1: Technaxx TX-156 camera with its complete set of accessories, including the MicroUSB cable, mounting belt, and hardware for installation.

ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the main components of your Technaxx TX-156 camera:

ഫ്രണ്ട് view of the Technaxx TX-156 solar security camera showing the solar panel, camera lens, PIR sensor, and LED lights.

ചിത്രം 2: ഫ്രണ്ട് view of the TX-156 camera, highlighting the integrated solar panel at the top, the central camera lens, the PIR motion sensor below the lens, and two high-power LED lights on either side.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. പ്രാരംഭ ചാർജിംഗ്

Before first use, it is recommended to fully charge the camera's internal batteries using the provided MicroUSB cable. Connect the cable to the camera's MicroUSB port and a standard USB power adapter (not included). The charging indicator (if present) will show the charging status.

2. മൈക്രോ എസ്ഡി കാർഡ് ചേർക്കുന്നു

The camera requires a Micro SD card (up to 512GB, not included) for storing video and photo recordings. Locate the Micro SD card slot, typically protected by a rubber cover. Gently insert the Micro SD card with the contacts facing down until it clicks into place.

Close-up of the Micro SD card slot on the Technaxx TX-156 camera with a Micro SD card partially inserted.

ചിത്രം 3: Detail of the Micro SD card slot, showing how to correctly insert the memory card for recording.

കുറിപ്പ്: The camera may require the Micro SD card to be formatted before use. If recordings are not saving, try formatting the card using a computer or the camera's configuration tool if available.

3. ക്യാമറ ഘടിപ്പിക്കുന്നു

The TX-156 offers versatile mounting options:

ഒപ്റ്റിമൽ പ്ലേസ്മെൻ്റ്:

ഓപ്പറേഷൻ

1. പവർ ഓൺ/ഓഫ്

The camera typically powers on automatically once charged and a Micro SD card is inserted. There may be a power switch near the Micro SD card slot. Refer to the specific markings on your device for the exact location and operation of the power switch.

2. Motion Detection and Recording

The TX-156 is equipped with a PIR (Passive Infrared) motion sensor. When motion is detected within its 120° range and up to 8 meters, the camera will automatically trigger a recording.

3. ഡാറ്റ വീണ്ടെടുക്കൽ

To access recorded videos and photos:

മെയിൻ്റനൻസ്

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ക്യാമറ റെക്കോർഡ് ചെയ്യുന്നില്ല.Micro SD card full, not inserted correctly, or not formatted.Check Micro SD card insertion. Format the card (backup data first). Replace with a new card if corrupted.
മോശം വീഡിയോ/ഫോട്ടോ നിലവാരം.Dirty lens, insufficient light, or camera too far from subject.Clean the camera lens. Ensure adequate lighting or reposition the camera closer to the subject.
Battery not holding charge / Camera powers off frequently.Insufficient sunlight for solar panel, or battery degradation.Relocate camera to an area with more direct sunlight. Ensure solar panel is clean. If issues persist, internal batteries may need service (contact Technaxx support).
മോഷൻ ഡിറ്റക്ഷൻ പ്രവർത്തിക്കുന്നില്ല.PIR sensor obstructed, or subject is outside detection range/angle.Ensure PIR sensor is clean and unobstructed. Adjust camera angle or position to cover the desired area.
Cannot connect wirelessly (if applicable).Connectivity issues (e.g., Wi-Fi signal, device settings).While the product description states "Sans Fil" (Wireless), it does not specify Wi-Fi. If your model has Wi-Fi, ensure it's within range of your router and check network settings. Perform a device reset if necessary.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡൽ നമ്പർTX-156 (4903)
ഇമേജ് സെൻസർ1/4" CMOS 2MP
ലെൻസ്F/NO 2.0; FOV=120°; Auto IR Filter
വീഡിയോ റെസല്യൂഷൻഫുൾ എച്ച്ഡി 1920 x 1080p
വീഡിയോ ദൈർഘ്യംDefault 10 seconds (adjustable)
പിഐആർ ഡിറ്റക്ഷൻ ആംഗിൾ120°
PIR കണ്ടെത്തൽ ശ്രേണിUp to 8 meters (open areas)
PIR Trigger Time0.2 - 0.25 സെക്കൻഡ്
നൈറ്റ് വിഷൻ റേഞ്ച്8 മീറ്റർ
പവർ ഉറവിടംSolar-powered; 2x 18650-2P Li-Ion batteries (4000mAh 3.7V each, integrated)
ബാറ്ററി ലൈഫ്Approx. 2 weeks (depending on usage, settings, temperature)
സംഭരണംMicro SD card (up to 512GB, not included)
പ്രവർത്തന താപനില10°C മുതൽ +40°C വരെ
മെറ്റീരിയൽഎബിഎസ് പ്ലാസ്റ്റിക്
അളവുകൾ (L x W x H)24 x 9 x 16 സെ.മീ (9.4 x 3.5 x 6.3 ഇഞ്ച്)
ഭാരം590 ഗ്രാം (1.3 പൗണ്ട്)
കാലാവസ്ഥ പ്രതിരോധംIP5 (Robust and weather-resistant)

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Technaxx webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

നിർമ്മാതാവ്: ടെക്നാക്സ്

മാതൃരാജ്യം: ചൈന