Clarke IG3500AF

Clarke IG3500AF 3400W Max Inverter Generator

ഉപയോക്തൃ മാനുവൽ

1 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

ജനറേറ്റർ പ്രവർത്തിപ്പിക്കുന്നതിന് മുമ്പ് ഈ മുഴുവൻ മാനുവലും വായിച്ച് മനസ്സിലാക്കുക. നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് ഗുരുതരമായ പരിക്കിനോ മരണത്തിനോ കാരണമാകും.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Clarke IG3500AF is a powerful and portable inverter generator designed to provide clean and stable electricity for various applications. Its advanced technology ensures a near-pure sine wave output, making it safe for sensitive electronics.

Clarke IG3500AF Inverter Generator

Figure 1: Clarke IG3500AF Inverter Generator

പ്രധാന സവിശേഷതകൾ:

3. സജ്ജീകരണ ഗൈഡ്

3.1 അൺപാക്കിംഗ്

  1. ജനറേറ്റർ അതിന്റെ പാക്കേജിംഗിൽ നിന്ന് ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
  2. എന്തെങ്കിലും ഷിപ്പിംഗ് കേടുപാടുകൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക. കേടുപാടുകൾ കണ്ടെത്തിയാൽ ഉടൻ തന്നെ നിങ്ങളുടെ ഡീലറെ ബന്ധപ്പെടുക.
  3. ഉൾപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

3.2 എഞ്ചിൻ ഓയിൽ ചേർക്കുന്നു

The generator is shipped without engine oil. Operating without oil will cause severe engine damage.

  1. ജനറേറ്റർ ഒരു ലെവൽ പ്രതലത്തിൽ സ്ഥാപിക്കുക.
  2. ഓയിൽ ഫിൽ ക്യാപ്പ്/ഡിപ്സ്റ്റിക്ക് കണ്ടെത്തുക.
  3. ഡിപ്സ്റ്റിക്ക് നീക്കം ചെയ്ത് വൃത്തിയാക്കുക.
  4. Add recommended engine oil (e.g., SAE 10W-30) to the crankcase until the oil level reaches the upper mark on the dipstick. Do not overfill.
  5. ഓയിൽ ഫിൽ ക്യാപ്പ്/ഡിപ്സ്റ്റിക്ക് സുരക്ഷിതമായി മാറ്റിസ്ഥാപിക്കുക.

3.3 ഇന്ധനം ചേർക്കുന്നു

87 അല്ലെങ്കിൽ അതിൽ കൂടുതൽ ഒക്ടേൻ റേറ്റിംഗുള്ള, പുതിയതും ലെഡില്ലാത്തതുമായ ഗ്യാസോലിൻ മാത്രം ഉപയോഗിക്കുക.

  1. ജനറേറ്റർ ഓഫ് ചെയ്തിട്ടുണ്ടെന്നും തണുത്തുവെന്നും ഉറപ്പാക്കുക.
  2. ഇന്ധനം നിറയ്ക്കുന്നതിനായി ജനറേറ്റർ നല്ല വായുസഞ്ചാരമുള്ള ഒരു പുറം സ്ഥലത്തേക്ക് മാറ്റുക.
  3. ഇന്ധന തൊപ്പി അഴിക്കുക.
  4. Carefully pour gasoline into the fuel tank, up to the fill limit (approximately 13 liters). Do not overfill.
  5. ഇന്ധന തൊപ്പി സുരക്ഷിതമായി മാറ്റിസ്ഥാപിക്കുക. ചോർന്ന ഇന്ധനം ഉടനടി തുടച്ചുമാറ്റുക.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 ജനറേറ്റർ ആരംഭിക്കുന്നു (റീകോയിൽ സ്റ്റാർട്ട്)

  1. ജനറേറ്റർ ഒരു നിരപ്പായ പ്രതലത്തിലാണെന്നും എല്ലാ വൈദ്യുത ലോഡുകളും വിച്ഛേദിക്കപ്പെട്ടിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
  2. ഇന്ധന വാൽവ് 'ഓൺ' സ്ഥാനത്തേക്ക് തിരിക്കുക.
  3. എഞ്ചിൻ തണുത്തതാണെങ്കിൽ ചോക്ക് ലിവർ 'CHOKE' സ്ഥാനത്തേക്ക് നീക്കുക.
  4. എഞ്ചിൻ സ്വിച്ച് 'ഓൺ' സ്ഥാനത്തേക്ക് തിരിക്കുക.
  5. Grasp the recoil starter handle firmly and pull it slowly until resistance is felt, then pull quickly and smoothly. Repeat until the engine starts.
  6. എഞ്ചിൻ സ്റ്റാർട്ട് ചെയ്തുകഴിഞ്ഞാൽ, ചോക്ക് ലിവർ പതുക്കെ 'RUN' സ്ഥാനത്തേക്ക് നീക്കുക.
  7. ഇലക്ട്രിക്കൽ ലോഡുകൾ ബന്ധിപ്പിക്കുന്നതിന് മുമ്പ് എഞ്ചിൻ കുറച്ച് മിനിറ്റ് ചൂടാക്കാൻ അനുവദിക്കുക.

4.2 ജനറേറ്റർ നിർത്തുന്നു

  1. ജനറേറ്ററിൽ നിന്ന് എല്ലാ ഇലക്ട്രിക്കൽ ലോഡുകളും വിച്ഛേദിക്കുക.
  2. തണുപ്പിക്കാൻ വേണ്ടി, ലോഡ് ഇല്ലാതെ കുറച്ച് മിനിറ്റ് ജനറേറ്റർ പ്രവർത്തിപ്പിക്കാൻ അനുവദിക്കുക.
  3. എഞ്ചിൻ സ്വിച്ച് 'ഓഫ്' സ്ഥാനത്തേക്ക് തിരിക്കുക.
  4. ഇന്ധന വാൽവ് 'ഓഫ്' സ്ഥാനത്തേക്ക് തിരിക്കുക.

4.3 വൈദ്യുത ഉപകരണങ്ങൾ ബന്ധിപ്പിക്കൽ

4.4 ECO Throttle System

The ECO throttle system automatically adjusts engine speed to match the load, reducing fuel consumption and noise levels. For maximum power or when starting high-load devices, it may be necessary to switch the ECO throttle OFF.

4.5 ഓവർലോഡ് സംരക്ഷണം

The generator is equipped with an overload protection system. If the generator is overloaded, the circuit breaker will trip, and power output will stop. Reduce the load and reset the circuit breaker to restore power.

5. പരിപാലനം

Regular maintenance is crucial for the longevity and reliable operation of your generator. Always turn off the engine and allow it to cool before performing any maintenance.

5.1 Regular Checks (Before Each Use)

5.2 എയർ ഫിൽറ്റർ

Clean the air filter every 50 hours of operation or more frequently in dusty conditions. Replace if damaged.

  1. എയർ ഫിൽട്ടർ കവർ നീക്കം ചെയ്യുക.
  2. നുരയെ ഫിൽട്ടർ ഘടകം നീക്കം ചെയ്യുക.
  3. Wash the element in warm, soapy water, rinse, and allow to air dry completely.
  4. Lightly oil the foam element with engine oil, then squeeze out excess oil.
  5. Reinstall the filter element and cover.

5.3 സ്പാർക്ക് പ്ലഗ്

Inspect the spark plug every 100 hours of operation. Replace if necessary.

  1. സ്പാർക്ക് പ്ലഗ് ക്യാപ് നീക്കം ചെയ്യുക.
  2. സ്പാർക്ക് പ്ലഗ് നീക്കം ചെയ്യാൻ ഒരു സ്പാർക്ക് പ്ലഗ് റെഞ്ച് ഉപയോഗിക്കുക.
  3. Check for carbon deposits or wear. Clean with a wire brush if needed.
  4. സ്പാർക്ക് പ്ലഗ് വിടവ് പരിശോധിക്കുക (ശരിയായ വിടവിന് സ്പെസിഫിക്കേഷനുകൾ കാണുക).
  5. സ്പാർക്ക് പ്ലഗും തൊപ്പിയും വീണ്ടും ഇൻസ്റ്റാൾ ചെയ്യുക.

5.4 ഇന്ധന ഫിൽട്ടർ

Inspect the fuel filter periodically and replace if clogged or damaged. Refer to the service manual for detailed instructions.

5.5 സംഭരണം

For extended storage (more than 30 days):

6. പ്രശ്‌നപരിഹാരം

This section provides solutions to common operational problems. For issues not listed here, contact customer support.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
എഞ്ചിൻ ആരംഭിക്കില്ലഇന്ധനമില്ല
കുറഞ്ഞ എണ്ണ നില
എഞ്ചിൻ സ്വിച്ച് ഓഫ്
Choke incorrect
സ്പാർക്ക് പ്ലഗ് തകരാറാണ്
ഇന്ധനം ചേർക്കുക
എണ്ണ ചേർക്കുക
എഞ്ചിൻ സ്വിച്ച് ഓണാക്കുക
ചോക്ക് ക്രമീകരിക്കുക
സ്പാർക്ക് പ്ലഗ് വൃത്തിയാക്കുക/മാറ്റിസ്ഥാപിക്കുക
പവർ ഔട്ട്പുട്ട് ഇല്ലഓവർലോഡ്
സർക്യൂട്ട് ബ്രേക്കർ തകർന്നു
അയഞ്ഞ കണക്ഷനുകൾ
ലോഡ് കുറയ്ക്കുക
സർക്യൂട്ട് ബ്രേക്കർ പുനഃസജ്ജമാക്കുക
കണക്ഷനുകൾ പരിശോധിച്ച് സുരക്ഷിതമാക്കുക
പ്രവർത്തന സമയത്ത് എഞ്ചിൻ നിർത്തുന്നുഇന്ധനം തീർന്നു
കുറഞ്ഞ എണ്ണ നില
ഓവർലോഡ്
ഇന്ധനം ചേർക്കുക
എണ്ണ ചേർക്കുക
ലോഡ് കുറയ്ക്കുക

7 സാങ്കേതിക സവിശേഷതകൾ

സ്പെസിഫിക്കേഷൻമൂല്യം
ബ്രാൻഡ്ക്ലാർക്ക്
മോഡൽ നമ്പർ8877125 (IG3500AF)
എഞ്ചിൻ തരം212cc 4-stroke
പവർ ഉറവിടംFuel (Petrol)
പരമാവധി ഔട്ട്പുട്ട് പവർ3400 Watt (3.4 kW)
തുടർച്ചയായ റേറ്റുചെയ്ത പവർ3200 Watt (3.2 kW)
വാല്യംtage230 Volt AC, 12 Volt DC
ഇന്ധന തരംപെട്രോൾ
ഇന്ധന ടാങ്ക് ശേഷി13 ലിറ്റർ
പ്രവർത്തന സമയം (75% ലോഡ്)8 മണിക്കൂർ
പ്രത്യേക സവിശേഷതകൾPortable, ECO Throttle, Pure Sine Wave
ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾസ്റ്റാർട്ടർ വീണ്ടും ഉപയോഗിക്കുക
നിറംകറുപ്പ്
അളവുകൾ (L x W x H)555 x 465 x 495 മിമി
ഭാരം35 കി.ഗ്രാം
ശബ്ദ നില96 ഡിബി(എ)

8. വാറണ്ടിയും ഉപഭോക്തൃ പിന്തുണയും

Warranty information for the Clarke IG3500AF Inverter Generator is typically provided at the time of purchase or included with the product documentation. Please refer to your purchase receipt or the warranty card for specific terms and conditions.

For technical assistance, spare parts, or warranty claims, please contact your authorized Clarke dealer or the manufacturer's customer support directly. Ensure you have your model number (IG3500AF) and serial number ready when contacting support.

അനുബന്ധ രേഖകൾ - IG3500AF

പ്രീview Clarke IG3500AF 3.4kW Inverter Generator: Operation and Maintenance Manual
Comprehensive operation and maintenance instructions for the Clarke IG3500AF 3.4kW Inverter Generator, including safety guidelines, setup, usage, troubleshooting, and specifications.
പ്രീview Clarke 2000W Inverter Generator IG2000 Operation & Maintenance Manual
Comprehensive operation and maintenance instructions for the Clarke 2000W Inverter Generator (Model IG2000). Covers safety, setup, usage, maintenance, and troubleshooting for reliable power generation.
പ്രീview Clarke IG950D 800W Inverter Generator: Operation & Maintenance Manual
Official operation and maintenance instructions for the Clarke IG950D 800W Inverter Generator. Covers safety, setup, starting, operation, maintenance procedures, troubleshooting, and specifications.
പ്രീview Clarke IG1900 2000W Inverter Generator: Operation & Maintenance Manual
Comprehensive operation, maintenance, and safety instructions for the Clarke IG1900 2000W Inverter Generator. Includes specifications, troubleshooting, and parts lists.
പ്രീview Clarke 12V Battery Charger ATC12V - Product Range, Manual, and Specifications
Comprehensive guide for the Clarke 12V Battery Charger (Model ATC12V), including product range overview, safety precautions, operation instructions, specifications, and guarantee details. Features contact information for parts and service.
പ്രീview CLARKE DFT12A 12V Diesel Fuel Transfer Pump - Operation & Maintenance Manual
Official operation and maintenance instructions for the CLARKE DFT12A 12V Diesel Fuel Transfer Pump. Includes specifications, safety precautions, connection, operation, faultfinding, and component parts.