Nikon WR-R11b

Nikon WR-R11b Wireless Remote Controller User Manual

Model: WR-R11b (Nikon 4239)

1. ആമുഖം

The Nikon WR-R11b is a wireless remote controller designed to provide remote shutter release functionality for compatible Nikon cameras and control for radio-controlled flash units like the SB-5000 Speedlight. This device operates using radio frequencies, offering enhanced range and reliability compared to infrared systems. It can function as a transceiver, allowing it to be triggered by other Nikon wireless remote controllers or to act as a master unit for controlling multiple WR-R11b units.

This manual provides detailed instructions for the proper setup, operation, and maintenance of your WR-R11b to ensure optimal performance and longevity.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read all safety instructions carefully before using the WR-R11b. Failure to follow these instructions could result in injury or damage to the product or other equipment.

3. പാക്കേജ് ഉള്ളടക്കം

Verify that all items listed below are included in your package. If any item is missing or damaged, please contact your retailer.

Nikon WR-R11b Remote Controller with small strap

ചിത്രം 1: The Nikon WR-R11b Wireless Remote Controller, shown with its compact design and the included small strap for convenient attachment to a camera strap.

4. സജ്ജീകരണം

4.1 Attaching the WR-R11b to the Camera

The WR-R11b connects to your Nikon camera via its accessory port.

  1. Locate the accessory port on your compatible Nikon camera (e.g., Z 7II, Z 6II).
  2. Align the connector on the WR-R11b with the camera's accessory port.
  3. Gently push the WR-R11b into the port until it is securely seated. Do not force the connection.
  4. Use the provided small strap to secure the WR-R11b to your camera strap or another convenient location to prevent accidental disconnection or loss.

4.2 Pairing with a Transmitter (WR-T10 or WR-1)

To enable wireless control, the WR-R11b must be paired with a compatible transmitter unit such as the WR-T10 or WR-1.

  1. Ensure both the camera (with WR-R11b attached) and the transmitter (WR-T10 or WR-1) are powered on.
  2. Refer to your camera's manual for specific instructions on enabling remote control functionality.
  3. On the WR-R11b, press and hold the pairing button (refer to the device for exact location, typically a small recessed button).
  4. While holding the WR-R11b pairing button, initiate the pairing process on your WR-T10 or WR-1 transmitter according to its instruction manual.
  5. A successful pairing will typically be indicated by a status light on both units.

4.3 ചാനൽ തിരഞ്ഞെടുക്കൽ

The WR-R11b supports three radio frequency channels (5, 10, and 15) to minimize interference when multiple photographers are operating in the same area or when controlling multiple units.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 അടിസ്ഥാന ഷട്ടർ റിലീസ്

Once the WR-R11b is connected and paired, you can remotely trigger your camera's shutter.

5.2 Controlling Multiple Units

The WR-R11b system allows for simultaneous control of multiple cameras or flash units.

5.3 Controlling Speedlights

The WR-R11b can also be used to control radio-controlled flash units, such as the Nikon SB-5000 Speedlight.

5.4 പ്രവർത്തന ശ്രേണി

The effective operating range of the WR-R11b system depends on the configuration:

കുറിപ്പ്: Actual range may vary depending on environmental conditions, obstacles, and radio interference.

6. പരിപാലനം

6.1 വൃത്തിയാക്കൽ

To maintain the performance and appearance of your WR-R11b:

6.2 സംഭരണം

When not in use for extended periods, store the WR-R11b in a cool, dry place away from direct sunlight and extreme temperatures.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your WR-R11b, refer to the following common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
യൂണിറ്റ് പ്രതികരിക്കുന്നില്ല.
  • Not properly connected to camera.
  • ക്യാമറ ഓൺ ചെയ്തിട്ടില്ല.
  • Not paired with transmitter.
  • തെറ്റായ ചാനൽ തിരഞ്ഞെടുത്തു.
  • പരിധിക്ക് പുറത്ത്.
  • Ensure WR-R11b is securely attached to the camera's accessory port.
  • ക്യാമറ ഓണാക്കുക.
  • Perform the pairing process again (Section 4.2).
  • Verify that the WR-R11b and transmitter are on the same channel (Section 4.3).
  • Move closer to the camera/transmitter.
Intermittent connection or poor range.
  • പരിസ്ഥിതി ഇടപെടൽ.
  • യൂണിറ്റുകൾ തമ്മിലുള്ള തടസ്സങ്ങൾ.
  • Low battery in transmitter (if applicable).
  • Change the operating channel (Section 4.3).
  • Ensure a clear line of sight between units.
  • Replace batteries in the transmitter.
Cannot control Speedlights.
  • Speedlight not paired.
  • Incorrect Speedlight settings.
  • Pair the Speedlight with the WR-R11b (refer to Speedlight manual).
  • Check Speedlight's wireless settings.

8 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡലിൻ്റെ പേര്WR-R11b
Nikon Model Number4239
ടൈപ്പ് ചെയ്യുകWireless Remote Controller (Transceiver)
ആശയവിനിമയംRadio Frequency (2.4 GHz band)
ചാനലുകൾ3 (5, 10, 15)
Range (WR-T10 to WR-R11b)Approx. 66 ft (20 m) line of sight
Range (WR-R11b master to other units)Approx. 164 ft (50 m) line of sight
Range (WR-R11b to Speedlight)ഏകദേശം 98 അടി (30 മീ)
Max Supported Transceiver Units (as master)64
Max Supported Speedlights18
പവർ ഉറവിടംSupplied by camera via accessory port
അനുയോജ്യമായ ക്യാമറകൾNikon cameras with an accessory port (e.g., Z 7II, Z 6II)
ഉൽപ്പന്ന അളവുകൾ6.1 x 8 x 1.8 ഇഞ്ച്
ഇനത്തിൻ്റെ ഭാരം6.1 ഔൺസ്

9. വാറൻ്റിയും പിന്തുണയും

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Nikon webസൈറ്റ്.

For technical support, service, or additional product information, please contact Nikon customer support through their official channels.

നിക്കോൺ പിന്തുണ Webസൈറ്റ്

അനുബന്ധ രേഖകൾ - WR-R11b

പ്രീview നിക്കോൺ SB-20 ഓട്ടോഫോക്കസ് സ്പീഡ്‌ലൈറ്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ
പ്രൊഫഷണൽ ഫോട്ടോഗ്രാഫർമാർക്കും ഉത്സാഹികളായ ഫോട്ടോഗ്രാഫർമാർക്കും വേണ്ടി, നിക്കോൺ SB-20 ഓട്ടോഫോക്കസ് സ്പീഡ്‌ലൈറ്റിന്റെ സവിശേഷതകൾ, പ്രവർത്തനം, വിവിധ നിക്കോൺ ക്യാമറ മോഡലുകളുമായുള്ള അനുയോജ്യത എന്നിവ വിശദീകരിക്കുന്ന സമഗ്രമായ നിർദ്ദേശ മാനുവൽ.
പ്രീview നിക്കോൺ Z 7II & Z 6II ഡിജിറ്റൽ ക്യാമറ റഫറൻസ് ഗൈഡ്
A comprehensive reference guide for Nikon Z 7II and Z 6II digital cameras, covering setup, shooting, playback, and custom settings. This manual is designed to help users maximize the capabilities of their Nikon cameras.
പ്രീview നിക്കോൺ Z 7II & Z 6II ഡിജിറ്റൽ ക്യാമറ ഉപയോക്തൃ ഗൈഡ്
നിക്കോൺ Z 7II, Z 6II ഡിജിറ്റൽ ക്യാമറകൾക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ ഗൈഡ്, സജ്ജീകരണം, പ്രവർത്തനം, ഫോട്ടോഗ്രാഫി, വീഡിയോഗ്രാഫി, ക്രമീകരണങ്ങൾ, ഇഷ്ടാനുസൃത പ്രവർത്തനങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview നിക്കോൺ Z 7II & Z 6II ഡിജിറ്റൽ ക്യാമറ റഫറൻസ് ഗൈഡ്
A comprehensive reference guide for Nikon Z 7II and Z 6II digital cameras, covering setup, features, shooting modes, playback options, and custom settings. This guide is designed to help users maximize their photography and videography experience with Nikon's advanced camera technology.
പ്രീview നിക്കോൺ Z 7II & Z 6II ഡിജിറ്റൽ ക്യാമറ റഫറൻസ് ഗൈഡ്
നിക്കോൺ Z 7II, Z 6II ഡിജിറ്റൽ ക്യാമറകൾക്കായുള്ള സമഗ്ര റഫറൻസ് ഗൈഡ്, സജ്ജീകരണം, പ്രവർത്തനം, ക്രമീകരണങ്ങൾ, സവിശേഷതകൾ എന്നിവ ഉൾക്കൊള്ളുന്നു. ഷൂട്ടിംഗ് മോഡുകൾ, പ്ലേബാക്ക് ഓപ്ഷനുകൾ, മെനു കസ്റ്റമൈസേഷൻ എന്നിവയെക്കുറിച്ചും മറ്റും അറിയുക.
പ്രീview നിക്കോൺ R1C1 ക്ലോസ്-അപ്പ് സ്പീഡ്‌ലൈറ്റ് കമാൻഡർ കിറ്റ് ഉപയോക്തൃ മാനുവൽ
Nikon R1C1 ക്ലോസ്-അപ്പ് സ്പീഡ്‌ലൈറ്റ് കമാൻഡർ കിറ്റ്, R1 റിമോട്ട് കിറ്റ്, SU-800 കമാൻഡർ, SB-R200 സ്പീഡ്‌ലൈറ്റ് എന്നിവയ്‌ക്കുള്ള സമഗ്രമായ നിർദ്ദേശങ്ങൾ ഈ ഉപയോക്തൃ മാനുവലിൽ അടങ്ങിയിരിക്കുന്നു. സുരക്ഷാ മുൻകരുതലുകൾ, സജ്ജീകരണ നടപടിക്രമങ്ങൾ, ഫ്ലാഷ് പ്രവർത്തന മോഡുകൾ, ആക്‌സസറി ഉപയോഗം, ട്രബിൾഷൂട്ടിംഗ്, അഡ്വാൻസ്ഡ് ക്ലോസ്-അപ്പ്, വയർലെസ് ഫ്ലാഷ് ഫോട്ടോഗ്രാഫിക്കുള്ള സാങ്കേതിക സവിശേഷതകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.