ആമുഖം
This manual provides essential information for the proper use, care, and maintenance of your ResMed AirFit P10 Frame System. The AirFit P10 Frame System is designed to be lightweight and easy to use, providing quiet comfort and stability for CPAP therapy. This set includes the frame system with a short tube and nasal pillows cushion. ഹെഡ്ഗിയർ ഉൾപ്പെടുത്തിയിട്ടില്ല with this frame system.
A prescription is required for the complete CPAP system.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The ResMed AirFit P10 Frame System consists of the mask frame, short tube, and nasal pillows cushion. These components work together to deliver air pressure for your CPAP therapy.
Image: The ResMed AirFit P10 Frame System, showing the nasal pillows cushion, short tube, and the frame without headgear. It highlights its small, lightweight, and easy-to-use design.
The nasal pillows cushion is designed to sit comfortably at the entrance of your nostrils, providing a seal without covering your entire nose or mouth. The short tube connects the nasal pillows to your main CPAP tubing.
സജ്ജമാക്കുക
To set up your AirFit P10 Frame System:
- ഘടകങ്ങൾ തിരിച്ചറിയുക: Ensure you have the nasal pillows cushion, the mask frame, and the short tube.
- Attach Nasal Pillows: Gently push the nasal pillows cushion onto the frame until it clicks securely into place. Ensure the 'L' and 'R' indicators on the pillows align with the corresponding sides of the frame.
- Connect Short Tube: Attach the short tube to the swivel connector on the mask frame.
- Check Size: Verify that the nasal pillows cushion size is appropriate for your nostrils. The correct size should provide a comfortable seal without feeling too tight or too loose.
Image: A close-up of a hand holding the nasal pillows cushion, indicating where to check the size marking (L for Large) on the frame system.
Once assembled, connect the short tube to your CPAP machine's main air tubing. If you are using a headgear (sold separately), attach it to the frame system according to its specific instructions.
പ്രവർത്തിക്കുന്നു
To use your ResMed AirFit P10 Frame System:
- മാസ്ക് സ്ഥാപിക്കുക: Place the nasal pillows into your nostrils. If using headgear, adjust it to ensure a secure but comfortable fit. The mask should feel stable without excessive pressure.
- Start CPAP Therapy: Turn on your CPAP machine. You should feel a gentle flow of air through the nasal pillows.
- ചോർച്ച പരിശോധിക്കുക: While lying down, check for any air leaks around the nasal pillows. Minor leaks are normal, but significant leaks can reduce therapy effectiveness. Adjust the mask position or headgear if necessary.
- ആശ്വാസം: Ensure the mask is comfortable and does not cause any skin irritation or pressure points.
മെയിൻ്റനൻസ്
Regular cleaning and replacement of your AirFit P10 Frame System components are crucial for hygiene and effective therapy. We recommend replacing your frame system every three months or sooner if signs of wear appear.
ദൈനംദിന പരിചരണം:
- കേടുപാടുകൾ സംഭവിക്കുന്നതിന്റെ ലക്ഷണങ്ങൾ കാണുമ്പോൾ മാറ്റിസ്ഥാപിക്കുക.
- ആവശ്യമെങ്കിൽ, CPAP വൈപ്പുകൾ അല്ലെങ്കിൽ സമാനമായ ആൽക്കഹോൾ-ഫ്രീ വൈപ്പുകൾ ഉപയോഗിച്ച് നുരയുടെ പുറംഭാഗം തുടയ്ക്കുക.
- Lay flat on a towel to air dry.
Important Cleaning Restrictions:
- നേരിട്ട് സൂര്യപ്രകാശം ഏൽക്കരുത്.
- Do not put in a dishwasher or washing machine.
- വൃത്തിയാക്കാൻ മദ്യമോ ബ്ലീച്ചോ ഉപയോഗിക്കരുത്.
Image: A visual guide for daily care of the AirFit frame system, detailing what to do (replace, wipe, air dry) and what not to do (direct sunlight, dishwasher, alcohol/bleach).
ട്രബിൾഷൂട്ടിംഗ്
If you experience issues with your AirFit P10 Frame System, consider the following:
നിങ്ങളുടെ ഫ്രെയിം സിസ്റ്റം മാറ്റിസ്ഥാപിക്കേണ്ട സമയമാണിതെന്ന് സൂചിപ്പിക്കുന്ന ലക്ഷണങ്ങൾ:
- നിങ്ങൾക്ക് അമിതമായ ചോർച്ച അനുഭവപ്പെടുന്നു.
- നിങ്ങളുടെ തെറാപ്പി സാധാരണയുള്ളതിനേക്കാൾ ഫലപ്രദമല്ലെന്ന് തോന്നുന്നു.
- Your frame system starts to show wear and tear.
Image: A visual reminder to replace the frame system every three months, accompanied by a list of indicators such as excessive leaks, reduced therapy effectiveness, or visible wear and tear.
If issues persist after checking these points, consult your healthcare provider or CPAP equipment supplier.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന അളവുകൾ | 7 x 4.5 x 1.6 ഇഞ്ച് |
| ഉൽപ്പന്ന ഭാരം | 3.53 ഔൺസ് |
| നിർമ്മാതാവ് | റെസ്മെഡ് |
| ASIN | B08MKYZQYL |
വാറൻ്റിയും പിന്തുണയും
For warranty information and customer support, please refer to the documentation provided with your original CPAP system or visit the official ResMed website. ResMed is dedicated to helping individuals with sleep apnea, COPD, and related issues improve their lives.
Image: The ResMed company logo.
