Nyko Charge Base Instruction Manual

ആമുഖം

This manual provides instructions for the Nyko Charge Base, a dual controller charging station designed for Xbox Series X|S and Xbox One controllers. It includes rechargeable batteries and features LED indicators to show charging status. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

• 1 x Nyko Charge Base Dual Controller Charging Dock
• 2 x 1100 mAh NiMH Rechargeable Battery Packs
• 4 x Replacement Battery Covers (2 for Xbox One, 2 for Xbox Series X|S)
• 1 x USB-C ചാർജ് കേബിൾ

Image showing the Nyko Charge Base, two rechargeable battery packs, four battery covers (two for Xbox One, two for Xbox Series X|S), and a USB-C charging cable.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. Install Battery Packs: Open the battery compartment on your Xbox controller. Insert one of the provided 1100 mAh rechargeable battery packs, ensuring correct polarity.
2. ബാറ്ററി കവർ ഘടിപ്പിക്കുക: Select the appropriate battery cover for your controller model (Xbox One or Xbox Series X|S) and snap it into place over the installed battery pack.
3. പവർ ബന്ധിപ്പിക്കുക: Connect the supplied USB-C cable to the Nyko Charge Base and plug the other end into a compatible USB power source (e.g., Xbox console, USB wall adapter). The base will illuminate.
4. Place Controller: Gently place your controller onto one of the charging docks on the Nyko Charge Base. Ensure the controller makes proper contact with the charging pins.

Diagram illustrating the three steps for setup: installing battery packs and covers, placing controllers onto the charge base, and charging one or two controllers.

ഒരു ഓവർഹെഡ് view of the Nyko Charge Base with an Xbox Series X|S controller docked, showing the green LED lighting.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Image highlighting the 15 hours of playtime per charge and the 2x 1100mAh NiMH rechargeable battery packs.

Image explaining safe charging with an intelligent charge board to prevent overcharging and the benefit of saving money by using rechargeable batteries.

മെയിൻ്റനൻസ്

• Keep the charging station clean and free from dust. Use a soft, dry cloth for cleaning.
• തീവ്രമായ താപനിലയിലോ ഈർപ്പത്തിലോ ഉപകരണം തുറന്നുകാട്ടുന്നത് ഒഴിവാക്കുക.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support if service is required.
• Ensure the charging pins on the dock and battery packs are clean and free of debris for optimal connection.

ട്രബിൾഷൂട്ടിംഗ്

Controller not charging / Red light flashing:

• Ensure the controller is properly seated on the charging dock and making full contact with the charging pins.
• Verify the USB-C cable is securely connected to both the Charge Base and the power source.
• Try a different USB power source or USB-C cable to rule out a faulty connection or cable.
• Check if the battery pack is correctly installed in the controller and the battery cover is securely attached.
• If only one side is flashing red or not charging, try swapping controllers or battery packs between the two docks to identify if the issue is with the controller/battery or the charging dock itself.

Controller not recognized by the charging station:

• Ensure the battery pack and cover are specifically designed for the Nyko Charge Base and your Xbox controller model.
• Clean the charging contacts on both the controller battery pack and the charging dock with a dry cloth.

Charge Base LEDs are off:

• Confirm the USB-C power cable is firmly connected to a working power source.
• മറ്റൊരു USB പോർട്ട് അല്ലെങ്കിൽ പവർ അഡാപ്റ്റർ പരീക്ഷിക്കുക.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the official Nyko webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.