ബെഹ്രിംഗർ മോണോപോളി സിന്തസൈസർ ഉപയോക്തൃ മാനുവൽ

ആമുഖം

The Behringer MONOPOLY is an authentic reproduction of the classic analog synthesizer from the 1980s. It features four classic Voltage Controlled Oscillators (VCOs) and offers a versatile 4-voice polyphonic/paraphonic design, supporting mono, unison, and polyphonic modes. Equipped with 37 semi-weighted full-size keys with velocity functionality, the MONOPOLY is designed for rich sound creation and expressive performance.

This manual provides essential information for setting up, operating, and maintaining your Behringer MONOPOLY synthesizer. Please read it thoroughly to ensure proper use and to maximize your instrument's potential.

പാക്കേജ് ഉള്ളടക്കം

• Behringer MONOPOLY Synthesizer
• പവർ അഡാപ്റ്റർ
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
• സുരക്ഷാ ഗൈഡ്

സജ്ജമാക്കുക

അൺപാക്കിംഗും പരിശോധനയും

Carefully remove the MONOPOLY from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If any damage is found, contact your dealer immediately.

പവർ കണക്ഷൻ

Connect the included power adapter to the DC IN port on the rear panel of the MONOPOLY. Plug the other end of the power adapter into a suitable power outlet. Ensure the power switch is in the OFF position before connecting power.

Figure 1: Rear panel connections, including the DC IN port for power.

The rear panel of the Behringer MONOPOLY features various input and output ports. From left to right, you will find the DC IN port for the power adapter, a USB port for MIDI over USB, MIDI IN, MIDI OUT, and MIDI THRU ports for traditional MIDI connections. Further to the right are various CV/Gate inputs and outputs for modular synthesis integration, and finally, the main audio OUTPUT and PHONES (headphone) output.

ഓഡിയോ കണക്ഷനുകൾ

Connect the main OUTPUT of the MONOPOLY to your mixer, audio interface, or amplifier using a standard 1/4-inch TS cable. For private monitoring, connect headphones to the PHONES output.

MIDI/USB Connections

For MIDI control from an external device (e.g., a computer or MIDI controller), connect a MIDI cable from your external device's MIDI OUT to the MONOPOLY's MIDI IN. Alternatively, connect a USB cable from the MONOPOLY's USB port to your computer for MIDI over USB functionality.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പവർ ചെയ്യുന്നത് ഓൺ/ഓഫ്

To power on the MONOPOLY, ensure all connections are secure, then flip the POWER switch located on the front panel to the ON position. To power off, flip the switch back to the OFF position.

ചിത്രം 2: ഫ്രണ്ട് പാനൽ കഴിഞ്ഞുview of the Behringer MONOPOLY.

The Behringer MONOPOLY features a comprehensive control panel. On the left are the BEND and WHEEL controls. The main section is divided into several functional blocks: VOLUME, OUTPUT, MG 1 (Modulation Generator 1), MG 2 (Modulation Generator 2), PWM (Pulse Width Modulation), EFFECTS, ARPEGGIATOR, TRANSPOSE, and KEY ASSIGN MODE. The right side features four independent VCO sections (VCO 1-4), a VCF (Voltage Controlled Filter) section, and a VCA EG (Voltagഇ നിയന്ത്രിത Amplifier Envelope Generator) section. The POWER switch is located on the far right.

Basic Sound Generation (VCOs)

The MONOPOLY features four Voltage Controlled Oscillators (VCOs). Each VCO has controls for Waveform (Sawtooth, Pulse, Triangle), Octave, and Level. To create a basic sound, ensure at least one VCO's level is turned up. Experiment with different waveforms and octave settings to hear the sonic variations.

ചിത്രം 3: വിശദമായി view of the control panel, including VCO sections.

ഈ ചിത്രം മുകളിൽ നിന്ന് താഴേക്ക് വ്യക്തമായ ഒരു ചിത്രം നൽകുന്നു. view of the synthesizer's control surface. You can clearly see the layout of the four VCO sections, each with its dedicated controls for waveform selection, octave range, and individual level mixing. The filter (VCF) and amplifier (VCA EG) sections are also visible, allowing for detailed sound shaping.

Filter (VCF) and Envelope (VCA EG)

The VCF section allows you to shape the timbre of your sound. Adjust the CUTOFF frequency to brighten or darken the sound, and the RESONANCE to add emphasis to the cutoff frequency. The VCA EG (Envelope Generator) controls how the sound evolves over time. Adjust ATTACK, DECAY, SUSTAIN, and RELEASE (ADSR) parameters to create different dynamic shapes, from sharp percussive sounds to long, evolving pads.

കീ അസൈൻ മോഡുകൾ

The MONOPOLY offers several key assign modes:

• മോണോ: Single voice operation, ideal for bass lines and lead melodies.
• UNISON: All four VCOs play the same note, creating a very thick and powerful sound.
• പോളി: Allows for 4-voice polyphony, enabling chords and more complex harmonies.
• ഹോൾഡ്: Sustains notes until the button is pressed again.

ആർപെഗിയേറ്റർ

The built-in arpeggiator can create rhythmic patterns from held notes. Activate the ARPEGGIATOR and adjust its parameters (e.g., tempo, range) to generate dynamic sequences.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To clean the MONOPOLY, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents, as they may damage the finish. For stubborn dirt, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉണങ്ങിയ തുണി ഉപയോഗിക്കാം.

സംഭരണം

When not in use for extended periods, store the synthesizer in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to cover the unit to protect it from dust.

ഫേംവെയർ അപ്ഡേറ്റുകൾ

ബെഹ്രിംഗർ ഇടയ്ക്കിടെ പരിശോധിക്കുക website for firmware updates. Updates can provide new features, performance improvements, or bug fixes. Follow the instructions provided with the firmware update carefully.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

വിശദമായ വാറന്റി വിവരങ്ങൾക്കും സാങ്കേതിക പിന്തുണയ്ക്കും, ദയവായി ഔദ്യോഗിക ബെഹ്രിംഗർ സന്ദർശിക്കുക. website or contact your local Behringer distributor. Keep your proof of purchase for warranty claims.

ഔദ്യോഗിക ബെഹ്രിംഗർ Webസൈറ്റ്: www.behringer.com