Habitat Decor MR3802W 30-inch Round Carved Frame Mirror User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Habitat Decor MR3802W is a 30-inch round mirror designed to enhance your living space. It features a wooden frame with ridged details and a distressed white finish, offering a rustic aesthetic. This mirror is intended for wall mounting and measures 30 inches in length and 30 inches in width.

• അളവുകൾ: 30 inches (76.2 cm) long x 30 inches (76.2 cm) wide
• ഫ്രെയിം മെറ്റീരിയൽ: മരം
• പൂർത്തിയാക്കുക: വിഷമിച്ച വെള്ള
• മൗണ്ടിംഗ് തരം: മതിൽ മൗണ്ട്

ചിത്രം 1: മുൻഭാഗം view of the Habitat Decor 30-inch round mirror, showcasing its distressed white carved frame.

2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety instructions before handling or installing the mirror. Failure to follow these instructions may result in injury or damage to the product.

• മുന്നറിയിപ്പ്: This mirror contains breakable glass. Always handle with extreme care to prevent injury.
• For wall mounting, ensure the chosen wall surface is structurally sound and level to securely support the mirror's weight (approximately 9.7 pounds or 4.4 kg).
• Avoid placing the mirror near direct heat sources, open flames, or areas prone to significant vibration, as this can increase the risk of breakage.
• In the event of breakage, exercise caution when cleaning up shattered glass to avoid cuts. Use protective gloves and dispose of glass fragments safely.
• Keep out of reach of children and pets during installation and ensure it is securely mounted afterward.

3. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.

• 1 x Habitat Decor MR3802W 30-inch Round Carved Frame Mirror
• Pre-installed hanging hardware (D-rings or similar, typically on the back)

Note: Mounting screws, wall anchors, and tools are not included and must be supplied by the user based on wall type.

4. ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

The Habitat Decor MR3802W mirror is designed for wall mounting and requires no assembly. Follow these steps for secure installation:

1. ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a suitable wall location, ensuring it is free from electrical wires, plumbing, or other obstructions. The wall must be capable of supporting the mirror's weight (approximately 9.7 lbs).
2. ഉപകരണങ്ങൾ ശേഖരിക്കുക: You will need a measuring tape, pencil, level, drill, appropriate wall anchors (e.g., drywall anchors, toggle bolts, or stud screws depending on your wall type), and screws.
3. Measure Hanging Points: On the back of the mirror, locate the pre-installed hanging hardware (typically two D-rings or keyhole hangers). Measure the distance between the centers of these hangers.
4. മതിൽ അടയാളപ്പെടുത്തുക: Transfer this measurement to your chosen wall location. Use a level to ensure the marked points are perfectly horizontal.
5. Install Anchors/Screws: Drill pilot holes at the marked points and install appropriate wall anchors if not drilling into a wall stud. Insert screws into the anchors or studs, leaving a small portion of the screw head exposed for the mirror's hangers to rest on.
6. Hang Mirror: Carefully lift the mirror and align the pre-installed hanging hardware on the back with the screws on the wall. Gently lower the mirror until it is securely seated on the screws.
7. സ്ഥിരത പരിശോധിക്കുക: Lightly tug on the mirror to ensure it is stable and securely mounted to the wall.

ചിത്രം 2: പിൻഭാഗം view of the mirror, illustrating the pre-installed hanging hardware for wall mounting.

5. പരിചരണവും പരിപാലനവും

Proper care will help maintain the appearance and longevity of your mirror.

• കണ്ണാടി ഉപരിതലം വൃത്തിയാക്കൽ: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the frame edges. Wipe gently until clean and streak-free.
• ഫ്രെയിം വൃത്തിയാക്കൽ: The wooden frame with its distressed white finish should be cleaned with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
• കൈകാര്യം ചെയ്യൽ: Always lift the mirror by its frame, not by the glass.
• പരിസ്ഥിതി: Avoid exposing the mirror to extreme temperature changes or high humidity, which can affect the wood frame and mirror backing.

Figure 3: Detail of the mirror's distressed white carved wooden frame.

6. പ്രശ്‌നപരിഹാരം

This section addresses common concerns you might encounter with your mirror.

7. ഉൽപ്പന്ന സവിശേഷതകൾ

8. വാറൻ്റിയും പിന്തുണയും

Based on the provided information, this product does not come with a manufacturer's warranty ("No Warranty").

For any questions regarding the product or assistance with installation, please refer to the retailer's customer service or contact the manufacturer, Brewster Home Fashions, directly.

• നിർമ്മാതാവ്: Brewster Home Fashions
• ബിസിനസ് സ്ഥലം: RANDOLPH, MA, 02368 US