Reer 98050

Reer Colour Softtemp 3-in-1 Non-Contact Infrared Thermometer

മോഡൽ: 98050

ബ്രാൻഡ്: റീർ

ആമുഖം

Thank you for choosing the Reer Colour Softtemp 3-in-1 Non-Contact Infrared Thermometer. This device is designed for safe, accurate, and hygienic temperature measurement of the body, surfaces, and ambient environments. Please read this manual thoroughly before first use to ensure proper operation and to maintain the device's longevity.

Reer Colour Softtemp 3-in-1 Non-Contact Infrared Thermometer

Image: The Reer Colour Softtemp thermometer, showing its digital display and sleek design.

സുരക്ഷാ വിവരങ്ങൾ

ഉൽപ്പന്ന സവിശേഷതകൾ

പാക്കേജ് ഉള്ളടക്കം

സജ്ജമാക്കുക

1. ബാറ്ററികൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നു

  1. തെർമോമീറ്ററിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ കണ്ടെത്തുക.
  2. കവർ തുറക്കുക.
  3. Insert the two AAA alkaline batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
  4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

Note: The thermometer comes with batteries included. Remove the protective tab if present before first use.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. Measuring Body Temperature

  1. Ensure the thermometer is in body temperature mode (usually indicated by a human icon). If not, press the mode button to switch.
  2. Hold the thermometer approximately 1-5 cm (0.4-2 inches) from the center of the forehead. Ensure there is no hair, sweat, or cosmetics obstructing the measurement area.
  3. Press the measurement button. The thermometer will beep once, and the reading will appear on the display within approximately 1 second.
  4. Interpret the reading based on the display color: Green for normal, Orange for elevated, Red for fever.
Measuring baby's forehead temperature with the Reer thermometer

Image: A close-up of the Reer thermometer being used to measure a baby's forehead temperature while they sleep, demonstrating the non-contact feature and quick 1-second measurement.

Measuring child's forehead temperature with the Reer thermometer

Image: A child smiling while their forehead temperature is being measured with the Reer thermometer, highlighting the fast and non-invasive measurement process.

2. Measuring Surface/Ambient Temperature

  1. Switch the thermometer to surface or ambient temperature mode (usually indicated by a house or object icon).
  2. Point the thermometer at the surface or area you wish to measure. For surface temperature, hold it close to the object. For ambient temperature, hold it in the air.
  3. Press the measurement button. The reading will be displayed.
Reer thermometer measuring baby bottle and bath water temperature

Image: The Reer thermometer being used to measure the temperature of a baby bottle and bath water, demonstrating its versatility for various household applications.

3. Understanding Fever Alarms

The Reer Colour Softtemp thermometer provides both visual and acoustic fever indications:

Reer thermometer display showing green, orange, and red fever alarms

Image: A visual representation of the Reer thermometer's display showing different backlight colors (green, orange, red) corresponding to normal, elevated, and fever temperatures, respectively.

4. മെമ്മറി പ്രവർത്തനം

The thermometer automatically stores the last 25 temperature readings. To access the memory:

  1. With the thermometer turned on, press the "MEM" button (if available, or the mode button repeatedly until memory mode is shown).
  2. Each press of the "MEM" button will cycle through the stored readings, from most recent to oldest.
Reer thermometer showing memory function on display

Image: A person holding the Reer thermometer, with its display showing a temperature reading and the "MEM" indicator, illustrating the memory function for tracking past measurements.

പരിപാലനവും പരിചരണവും

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
തെർമോമീറ്റർ ഓണാക്കുന്നില്ല.ബാറ്ററികൾ തീർന്നിരിക്കുന്നു അല്ലെങ്കിൽ തെറ്റായി ചേർത്തിരിക്കുന്നു.ബാറ്ററി പോളാരിറ്റി പരിശോധിക്കുക. ബാറ്ററികൾ മാറ്റിസ്ഥാപിക്കുക.
കൃത്യമല്ലാത്ത വായനകൾ.Sensor lens is dirty; measurement distance is incorrect; ambient temperature fluctuations.Clean the sensor lens. Ensure correct measurement distance (1-5 cm). Allow thermometer to acclimatize to room temperature for 30 minutes before use.
"Lo" or "Hi" displayed.താപനില അളക്കാവുന്ന പരിധിക്ക് പുറത്താണ്.Ensure you are measuring within the specified temperature range for body or surface mode.
ഡിസ്പ്ലേ "പിശക്" കാണിക്കുന്നു.സിസ്റ്റം പിശക് അല്ലെങ്കിൽ തകരാറ്.Remove and reinsert batteries. If error persists, contact customer support.

സ്പെസിഫിക്കേഷനുകൾ

മോഡൽ നമ്പർ98050
അളക്കൽ രീതിനോൺ-കോൺടാക്റ്റ് ഇൻഫ്രാറെഡ്
Measurement Range (Body)32.0°C - 42.9°C (89.6°F - 109.2°F)
Measurement Range (Surface/Ambient)0°C - 100°C (32°F - 212°F)
കൃത്യത±0.2°C (±0.4°F) for body temperature
ഡിസ്പ്ലേ തരംDigital, Illuminated LCD
പവർ ഉറവിടം2 x AAA ആൽക്കലൈൻ ബാറ്ററികൾ (ഉൾപ്പെടുത്തിയിരിക്കുന്നു)
ഉൽപ്പന്ന അളവുകൾ (L x W x H)19 x 4.5 x 9.7 സെ.മീ (7.5 x 1.8 x 3.8 ഇഞ്ച്)
ഭാരം130 ഗ്രാം (ഏകദേശം 4.6 ഔൺസ്)
മെറ്റീരിയൽപ്ലാസ്റ്റിക്
പാലിക്കൽCE

വാറൻ്റിയും പിന്തുണയും

Reer products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Reer webസൈറ്റ്.

For technical support, troubleshooting assistance, or spare parts, please contact Reer customer service. Contact details can typically be found on the product packaging or the official Reer webസൈറ്റ്.

നിർമ്മാതാവ്: റേർ
ബ്രാൻഡ്: റീർ

അനുബന്ധ രേഖകൾ - 98050

പ്രീview റീർ ബേബിഫോൺ റിഗി ഡിജിറ്റൽ - ബേഡിയുങ്‌സാൻലീറ്റംഗ്
Umfassende Bedienungsanleitung für das reer Babyphone Rigi Digital (Art.-Nr. 50070). Enthält Sicherheitshinweise, Inbetriebnahme, Funktionen, Fehlerbehebung und Garantieinformationen.
പ്രീview REER MZERO സ്റ്റാൻഡ് എലോൺ പ്രോഗ്രാം ചെയ്യാവുന്ന സുരക്ഷാ കൺട്രോളർ ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്
ഈ പ്രമാണം REER MZERO സ്റ്റാൻഡ് എലോൺ പ്രോഗ്രാമബിൾ സേഫ്റ്റി കൺട്രോളറിനായുള്ള ഒരു ദ്രുത ഇൻസ്റ്റാളേഷൻ ഗൈഡ് നൽകുന്നു, സുരക്ഷാ നിർദ്ദേശങ്ങൾ ഉൾക്കൊള്ളുന്നു, കൂടാതെview, ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ, സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റാളേഷൻ, ഇൻപുട്ടുകൾ, ഔട്ട്‌പുട്ടുകൾ, സാങ്കേതിക സവിശേഷതകൾ.
പ്രീview റീർ ടൈപ്പ് 1912 ചേഞ്ചിംഗ് ടേബിൾ റേഡിയന്റ് ഹീറ്റർ യൂസർ മാനുവൽ
റീർ TYP 1912 ചേഞ്ചിംഗ് ടേബിൾ റേഡിയന്റ് ഹീറ്ററിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ. സുരക്ഷിതവും ഫലപ്രദവുമായ ഉപയോഗത്തിനായി സുരക്ഷാ മുൻകരുതലുകൾ, അസംബ്ലി നിർദ്ദേശങ്ങൾ, പ്രവർത്തനം, വൃത്തിയാക്കൽ, സാങ്കേതിക സവിശേഷതകൾ, വാറന്റി വിശദാംശങ്ങൾ എന്നിവയെക്കുറിച്ചുള്ള അവശ്യ വിവരങ്ങൾ ഈ ഗൈഡ് നൽകുന്നു.
പ്രീview reer നൈറ്റ്ഗൈഡ് സ്മാർട്ട്ലൈറ്റ് ഉപയോക്തൃ മാനുവൽ
മോഷൻ സെൻസറുള്ള ഒരു സ്മാർട്ട് നൈറ്റ് ലൈറ്റായ റയർ നൈറ്റ് ഗൈഡ് സ്മാർട്ട്‌ലൈറ്റിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവലിൽ. സ്മാർട്ട് ലൈഫ് ആപ്പ് വഴിയുള്ള സജ്ജീകരണം, പ്രവർത്തനം, സുരക്ഷാ നിർദ്ദേശങ്ങൾ, സാങ്കേതിക സവിശേഷതകൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview REER MOSAIC M1S COM ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്
സുരക്ഷാ നിർദ്ദേശങ്ങൾ, മെക്കാനിക്കൽ, ഇലക്ട്രിക്കൽ ഇൻസ്റ്റാളേഷൻ, സോഫ്റ്റ്‌വെയർ സജ്ജീകരണം, ഇൻപുട്ടുകൾ, ഔട്ട്‌പുട്ടുകൾ, സാങ്കേതിക സവിശേഷതകൾ, അനുരൂപതയുടെ പ്രഖ്യാപനം എന്നിവ ഉൾക്കൊള്ളുന്ന REER MOSAIC M1S COM മോഡുലാർ സുരക്ഷാ കൺട്രോളറിനായുള്ള ദ്രുത ഇൻസ്റ്റാളേഷൻ ഗൈഡ്.
പ്രീview മൈക്രോൺ ഫോട്ടോഇലക്ട്രിക് മെഷർമെന്റ് ലൈറ്റ് കർട്ടൻ: ഇൻസ്റ്റലേഷൻ, സാങ്കേതിക സവിശേഷതകൾ, കോൺഫിഗറേഷൻ സോഫ്റ്റ്‌വെയർ ഗൈഡ്
REER മൈക്രോൺ ഫോട്ടോഇലക്ട്രിക് മെഷർമെന്റ് ലൈറ്റ് കർട്ടനിലേക്കുള്ള സമഗ്രമായ ഗൈഡ്, ഇൻസ്റ്റാളേഷൻ, സാങ്കേതിക സവിശേഷതകൾ, ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ, MICRONCONFIGURATOR ഉപയോഗിച്ചുള്ള സോഫ്റ്റ്‌വെയർ കോൺഫിഗറേഷൻ, പ്രവർത്തന നിരീക്ഷണം എന്നിവ വിശദീകരിക്കുന്നു.