ആമുഖം
This manual provides instructions for the installation, maintenance, and replacement of the eufy Clean X8 Series Side Brushes. These brushes are compatible with eufy Clean X8 and X8 Hybrid robot vacuum models. Regular maintenance ensures optimal cleaning performance of your robot vacuum.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The eufy Clean X8 Series Side Brushes are designed to sweep debris from edges and corners into the main cleaning path of your robot vacuum.
This image displays four individual eufy Clean X8 Series side brushes, each featuring three blue arms with black bristles, designed for sweeping debris.
അനുയോജ്യത
These side brushes are compatible with the following eufy Clean robot vacuum models:
- eufy Clean X8
- eufy Clean X8 Hybrid
Note: These side brushes are not compatible with the eufy Clean X8 Pro series.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Replacing the side brushes is a tool-free process.
- Power off your eufy Clean X8 Series robot vacuum.
- Turn the robot vacuum upside down to access the underside.
- Locate the side brushes. Each brush is typically held in place by a single screw or a snap-on mechanism.
- Gently pull the old brush upwards to remove it, or unscrew it if applicable.
- Align the new side brush with the post on the vacuum and press it down until it clicks into place, or secure it with the screw.
- Ensure the brush is securely attached and rotates freely.
This image shows the underside of a eufy Clean X8 robot vacuum, highlighting the area where the side brush module attaches. A detached brush module is visible below the vacuum.
മെയിൻ്റനൻസ്
Regular maintenance of your side brushes is crucial for maintaining cleaning efficiency.
ക്ലീനിംഗ് ഫ്രീക്വൻസി
- Inspect and clean the side brushes once every 2 weeks. Remove any tangled hair or debris.
മാറ്റിസ്ഥാപിക്കൽ ആവൃത്തി
- It is recommended to replace the side brushes every 3-6 months, depending on usage frequency and the amount of debris collected.
Using authentic eufy accessories helps extend the lifespan and maintain the performance of your vacuum cleaner.
ട്രബിൾഷൂട്ടിംഗ്
Side Brush Not Spinning or Tangled
- Power off the vacuum and remove the side brush.
- Carefully remove any hair, string, or debris tangled around the brush or its shaft.
- Reattach the brush securely. If the issue persists, replace the brush with a new one.
കുറഞ്ഞ ക്ലീനിംഗ് പ്രകടനം
- Check if the side brushes are worn out or bent. Worn brushes may not effectively sweep debris.
- Replace the side brushes if they show signs of significant wear.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | eufy |
| മോഡൽ അനുയോജ്യത | eufy X8, eufy X8 Hybrid |
| ഭാഗം നമ്പർ | T2930131 |
| യു.പി.സി | 194644095338 |
| ഇനത്തിൻ്റെ ഭാരം | 0.32 ഔൺസ് |
| ഉൽപ്പന്ന അളവുകൾ | 5.12 x 5.12 x 5.12 ഇഞ്ച് |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | 4 സൈഡ് ബ്രഷുകൾ |
വാറൻ്റിയും പിന്തുണയും
വാറന്റി വിവരങ്ങൾക്കും ഉപഭോക്തൃ പിന്തുണയ്ക്കും, ദയവായി ഔദ്യോഗിക eufy കാണുക. website or contact eufy customer service directly.
You can visit the official eufy store for more products and support: യൂഫി സ്റ്റോർ
