Nitecore FX3 Battery Charger Instruction Manual

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Nitecore FX3 is a compact, dual-slot USB-C battery charger designed for Fujifilm X-T4 camera NP-W235 batteries. It features Quick Charge (QC) capability, allowing for rapid charging of two batteries simultaneously. The integrated digital display provides real-time information on battery status, ensuring efficient and safe charging.

Figure 1: Nitecore FX3 charger, showing the main unit, included USB-C charging cable, and a NitecoreStore sticker.

സജ്ജമാക്കുക

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the Nitecore FX3 charger, USB-C charging cable, and any included accessories from the packaging.
2. പവർ കണക്ഷൻ: Connect the included USB-C charging cable to the USB-C input port on the charger.
   

   ചിത്രം 2: ക്ലോസപ്പ് view of the USB-C input port on the Nitecore FX3 charger, located on the side.

   Connect the other end of the USB-C cable to a compatible USB power source (e.g., a QC power adapter, computer USB port, or power bank). For optimal charging speed, a QC power adapter is recommended.
3. ബാറ്ററി ചേർക്കൽ: Insert one or two Fujifilm NP-W235 camera batteries into the designated charging slots. Ensure the battery contacts align correctly with the charger's pins. The charger is designed to accommodate one battery on the front and one on the back.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Nitecore FX3 charger features a high-definition LCD display that provides real-time charging information. Once batteries are inserted and power is connected, the display will activate.

• തത്സമയ പ്രദർശനം: The LCD screen shows critical charging parameters for each slot, including:
  • ബാറ്ററി ലെവൽ ഇൻഡിക്കേറ്റർ
  • ബാറ്ററി വോളിയംtagഇ (വി)
  • ചാർജിംഗ് കറന്റ് (mA)
  • ബാറ്ററി താപനില (°C)
  • Charged volume (mAh)
  • Battery health status (Good, Normal, Poor)
  

  Figure 3: The high-definition LCD display of the Nitecore FX3, illustrating real-time data such as battery health, charged volume, temperature, charging current, and battery voltage for both slots.

• ഒരേസമയം ചാർജിംഗ്: The FX3 can charge two batteries concurrently. In QC mode (with a 9V input voltage), it can deliver a maximum output current of 1,500mA to a single slot or 1,000mA to each slot when charging two batteries. This allows for approximately 80% charge of two batteries in 2 hours.
  

  Figure 4: Visual representation of the Nitecore FX3 charging two batteries, highlighting the QC fast charge input and 1500mA single slot max output, capable of charging 80% of two batteries in 2 hours.

• Automatic Current Application: The charger automatically detects the battery type and applies the correct charging current. It also features protection against improperly inserted batteries.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the charger's exterior. Do not use abrasive cleaners or solvents.
• സംഭരണം: ഉപയോഗിക്കാത്തപ്പോൾ നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും കടുത്ത താപനിലയിൽ നിന്നും മാറി തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് ചാർജർ സൂക്ഷിക്കുക.
• കേബിൾ കെയർ: Handle the USB-C cable carefully. Avoid sharp bends or excessive pulling that could damage the cable or connectors.

ട്രബിൾഷൂട്ടിംഗ്

• ചാർജർ ഓണാക്കുന്നില്ല:
  • Ensure the USB-C cable is securely connected to both the charger and the power source.
  • Verify that the USB power source is active and providing sufficient power (e.g., wall adapter is plugged in, power bank is charged).
  • കേബിളിലോ അഡാപ്റ്ററിലോ ഉള്ള പ്രശ്നങ്ങൾ ഒഴിവാക്കാൻ മറ്റൊരു USB-C കേബിളോ പവർ സ്രോതസ്സോ പരീക്ഷിച്ചു നോക്കൂ.
• Batteries Not Charging / Not Reaching Full Charge:
  • Confirm that the batteries are correctly inserted into the charging slots with proper contact.
  • Check the battery health status on the LCD display. If a battery is reported as "Poor," it may be at the end of its lifespan.
  • Some users have reported that certain OEM (Original Equipment Manufacturer) batteries may not always indicate a "Full" charge on the display, even if they are sufficiently charged. If the battery performs as expected in the camera, this may not indicate a fault with the charger.
  • Ensure you are using a QC-compatible power adapter for faster charging and to ensure the charger can deliver its maximum current.
• Display Not Showing Information:
  • The display activates when a battery is inserted and power is supplied. Ensure both conditions are met.
  • If the display remains blank, refer to "Charger Not Powering On" steps.

സ്പെസിഫിക്കേഷനുകൾ

Figure 5: Detailed specifications of the Nitecore FX3 charger, including input/output, dimensions, and compatibility.

വാറൻ്റിയും പിന്തുണയും

Nitecore products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Nitecore website. If you encounter any issues or require technical assistance, please contact Nitecore customer support through their official channels.

കൂടുതൽ വിവരങ്ങൾക്കും പിന്തുണയ്ക്കും, സന്ദർശിക്കുക Nitecore Store on Amazon.