ടെലിവസ് 1-ഇൻപുട്ട് ടിഫോഴ്‌സ് മാസ്റ്റ് Amplifier with BOSS-Tech and ‘F’ Power Supply Unit User Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of the Televes 1-Input TForce Mast Amplifier, model 560383. This device is designed to optimize TV signal reception by ensuring an appropriate signal level is delivered to your television system. It is compatible with any TV antenna and covers the entire TV band, while also filtering out 5G cellphone interference and supporting ATSC 3.0 broadcasting (NextGenTV).

Image 1.1: Televes 1-Input TForce Mast Amplifier, showing the main unit and its protective casing.

2 പ്രധാന സവിശേഷതകൾ

The Televes 1-Input TForce Mast Amplifier incorporates advanced technology to enhance your TV signal:

• ഡ്യുവൽ-ബാൻഡ് ampഉയർത്തൽ: Independent automatic gain regulation for VHF and UHF bands.
• ഓട്ടോമാറ്റിക് ഗെയിൻ കൺട്രോൾ (AGC): Compensates for fluctuations in the received signal to maintain optimal output levels, preventing over- or under-ampലിഫിക്കേഷൻ.
• ഉയർന്ന പ്രകടനം: Features very low noise and a high output level (47 dBmV UHF, 43 dBmV VHF).
• പരമാവധി നേട്ടം: 31 dB (UHF, channels 14-36), 22 dB (high VHF, channels 7-13), 22 dB (low VHF, channels 2-6).
• 5G Filtering: Fine-tuned filtering to avoid interference from 5G cellular signals.
• ATSC 3.0 Compatibility: Supports NextGenTV broadcasting standards.
• കരുത്തുറ്റ നിർമ്മാണം: High screening cast metal chassis provides excellent electromagnetic shielding.
• വൈദ്യുതി വിതരണം യൂണിറ്റ്: Includes a low-consumption, UL-listed power supply with two outputs for signal distribution.
• BOSS-Tech: Capable of passing power to an active antenna when required.
• കണക്ഷനുകൾ: Utilizes ‘F’ connectors for reliable signal transmission.

3. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• ടെലിവസ് 1-ഇൻപുട്ട് ടിഫോഴ്‌സ് മാസ്റ്റ് Ampലിഫയർ (മോഡൽ 560383)
• Protective weather-resistant casing
• UL-listed Power Supply Unit
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

കുറിപ്പ്: Coaxial cables for connecting the antenna to the ampജീവപര്യന്തവും amplifier to the power supply/TV are not included and must be purchased separately. Ensure you use high-quality, shielded coaxial cables for optimal performance.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

ശരിയായ ഇൻസ്റ്റാളേഷൻ നിർണായകമാണ് amplifier's performance. Follow these steps carefully.

4.1. സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ

• Always disconnect power before making any connections.
• Exercise caution when working on roofs or near power lines.
• Ensure all outdoor connections are weatherproofed to prevent moisture ingress.

4.2. മൌണ്ട് ചെയ്യുന്നു Ampജീവപര്യന്തം

ദി amplifier is designed for mast-mounted installation. It should be placed as close as possible to the antenna to minimize signal loss from the antenna to the ampജീവൻ.

• സുരക്ഷിതമായി അറ്റാച്ചുചെയ്യുക amplifier's protective casing to the antenna mast using appropriate mounting hardware (not included).
• Ensure the unit is oriented to allow proper drainage and protection from elements.

4.3. Connecting Coaxial Cables

ദി amplifier uses ‘F’ connectors. Ensure all connections are tight to prevent signal degradation and moisture entry.

ചിത്രം 4.1: ആന്തരികം view യുടെ amplifier showing the VHF/UHF input and output connections, and the BOSS-Tech switch.

1. Connect the coaxial cable from your antenna to the VHF/UHF IN തുറമുഖം ampജീവൻ.
2. എന്നതിൽ നിന്ന് ഒരു കോക്സിയൽ കേബിൾ ബന്ധിപ്പിക്കുക VHF/UHF DC OUT തുറമുഖം ampലേക്ക് കൂടുതൽ ഇൻപുട്ട് port on the power supply unit.
3. From the power supply unit, connect coaxial cables from the U ട്ട്‌പുട്ട് 1 കൂടാതെ/അല്ലെങ്കിൽ U ട്ട്‌പുട്ട് 2 ports to your TV(s) or distribution splitter.

പ്രധാനപ്പെട്ടത്: Ensure all ‘F’ connectors are properly aligned before tightening to avoid cross-threading. Hand-tighten first, then use a wrench for a snug fit.

4.4. യൂണിറ്റിന് ശക്തി നൽകുന്നു

ദി amplifier receives power through the coaxial cable from the included power supply unit.

1. Plug the UL-listed power supply unit into a standard electrical outlet.
2. The power supply unit will send 12V DC power up the coaxial cable to the amplifier. A power LED on the amplifier (visible when the cover is open) indicates it is receiving power.

4.5. BOSS-Tech Configuration

ദി amplifier features a BOSS-Tech switch (labeled ഓഫ്/ഓൺ വേണ്ടി VHF/UHF DC) which controls DC power pass-through to the antenna.

• നിങ്ങൾ എ ഉപയോഗിക്കുകയാണെങ്കിൽ passive antenna (one that does not require power), set the switch to ഓഫ്. This is the default and recommended setting for most standard antennas.
• നിങ്ങൾ ഒരു ഉപയോഗിക്കുകയാണെങ്കിൽ active antenna (e.g., a Televes BOSS-Tech antenna) that requires DC power from the amplifier, set the switch to ON.

5. ഓപ്പറേഷൻ

Once properly installed and powered, the Televes 1-Input TForce Mast Amplifier operates automatically. The integrated Automatic Gain Control (AGC) continuously monitors the incoming signal levels for both VHF and UHF bands independently. It adjusts the amplification to ensure a consistent and optimal output level, preventing signal overload or insufficient amplification. No manual adjustments are typically required for daily operation.

6. പ്രശ്‌നപരിഹാരം

If you experience issues with your TV signal, consider the following troubleshooting steps:

6.1. No Signal or Poor Picture Quality

• പവർ പരിശോധിക്കുക: Ensure the power supply unit is plugged in and the amplifier's power LED is illuminated.
• കണക്ഷനുകൾ പരിശോധിക്കുക: Inspect all coaxial cable connections for tightness and proper seating. Loose or corroded connections can significantly degrade signal quality.
• കേബിൾ സമഗ്രത: Check coaxial cables for damage, kinks, or cuts. Damaged cables should be replaced.
• ആന്റിന വിന്യാസം: Confirm your antenna is correctly aimed towards broadcast towers.
• BOSS-Tech Switch: Ensure the BOSS-Tech switch is in the correct position (ON for active antennas, OFF for passive antennas). An incorrect setting can prevent signal or power.
• ചാനലുകൾ വീണ്ടും സ്കാൻ ചെയ്യുക: After making any changes, perform a channel rescan on your TV or tuner.

6.2. Interference Issues

• ദി amplifier includes 5G filtering. If interference persists, ensure all connections are shielded and properly grounded.
• തടസ്സമുണ്ടാക്കാൻ സാധ്യതയുള്ള ഇലക്ട്രോണിക് ഉപകരണങ്ങൾ സമീപത്തുണ്ടോയെന്ന് പരിശോധിക്കുക.

6.3. Weather-Related Problems

• While the unit is designed for outdoor use, extreme weather can affect performance. Regularly inspect the protective casing and connections for signs of wear or moisture ingress.
• Consider adding additional weatherproofing measures, such as silicone sealant around outdoor connections, especially in harsh climates.

7 സാങ്കേതിക സവിശേഷതകൾ

ചിത്രം 7.1: വശം view യുടെ amplifier, illustrating its compact dimensions.

8. പരിചരണവും പരിപാലനവും

The Televes 1-Input TForce Mast Amplifier is designed for durability and minimal maintenance. However, following these guidelines can extend its lifespan and ensure continued performance:

• പതിവ് പരിശോധന: ഇടയ്ക്കിടെ പരിശോധിക്കുക amplifier and its connections, especially after severe weather, for any signs of physical damage, corrosion, or loose cables.
• ശുചിത്വം: Keep the unit free from excessive dirt, dust, and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive cleaners.
• കാലാവസ്ഥ സംരക്ഷണം: While the casing is weather-resistant, ensure it remains securely closed and that all cable entry points are sealed to prevent moisture from reaching the internal electronics.

9. വാറണ്ടിയും ഉപഭോക്തൃ പിന്തുണയും

For specific warranty information, please refer to the documentation included with your purchase or visit the official Televes website. If you encounter issues that cannot be resolved using the troubleshooting steps provided, or require further assistance, please contact Televes customer support.

You can find additional resources and contact information by visiting the Televes Store on Amazon അല്ലെങ്കിൽ അവരുടെ ഔദ്യോഗിക കോർപ്പറേറ്റ് webസൈറ്റ്.