MB Quart RW-108A

MB Quart RW-108A 600W Reference Series Active Powered Subwoofer Instruction Manual

Model: RW-108A / RW108APK3

ആമുഖം

The MB Quart RW-108A is a compact, active powered subwoofer enclosure designed to deliver powerful bass in vehicles with limited space. Its slim form factor allows for easy installation, typically under a seat, providing enhanced audio performance without sacrificing cabin room. This all-inclusive solution features a built-in amplifier and advanced protection circuits to ensure longevity and reliable operation. The unit is constructed from durable aluminum, aiding in heat dissipation, and includes a protective metal grille for the diaphragm.

സുരക്ഷാ വിവരങ്ങൾ

ഈ ഉൽപ്പന്നം പ്രവർത്തിപ്പിക്കുന്നതിന് മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും വായിച്ച് മനസ്സിലാക്കുക. ഈ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് ഉൽപ്പന്നത്തിനോ വാഹനത്തിനോ പരിക്കോ കേടുപാടുകളോ ഉണ്ടാക്കാൻ കാരണമായേക്കാം.

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the components and controls of your MB Quart RW-108A subwoofer.

MB Quart RW-108A Subwoofer with Wired Remote

Figure 1: MB Quart RW-108A Active Powered Subwoofer with its wired remote control. The compact design is evident, suitable for under-seat installation.

പിൻ പാനൽ കണക്ഷനുകളും നിയന്ത്രണങ്ങളും

Rear panel of MB Quart RW-108A Subwoofer showing power input, line inputs, remote control port, and various adjustment knobs.

ചിത്രം 2: വിശദമായി view of the subwoofer's rear panel, displaying power input terminals (+12V, REM, GND), fuse, high-level and low-level (RCA) inputs, remote control port, and adjustment knobs for Input Level, Bass Boost, Low Pass filter, and Phase. Indicator lights for Power and Protect are also visible.

Wired Bass Remote Control

Close-up of the wired bass remote control for the MB Quart subwoofer.

Figure 3: The wired bass remote control, featuring a rotary knob for adjusting the subwoofer's output level (Min to Max).

The wired bass remote allows for convenient adjustment of the subwoofer's output level from the driver's seat, providing on-the-fly control over bass intensity.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for optimal performance and safety. If you are not comfortable with car audio wiring, seek professional assistance.

മൗണ്ടിംഗ് ലൊക്കേഷൻ

MB Quart RW-108A Subwoofer with dimensions labeled: 13 inches length, 9 1/4 inches width, and 2 1/4 inches height.

Figure 4: The MB Quart RW-108A subwoofer with its compact dimensions: approximately 13 inches (length) x 9.25 inches (width) x 2.25 inches (height). These dimensions make it suitable for under-seat or other confined spaces.

The MB Quart RW-108A is designed for compact spaces. Common mounting locations include:

Ensure the chosen location allows for adequate air circulation around the unit to prevent overheating. Secure the subwoofer firmly using the provided mounting hardware to prevent movement during vehicle operation.

വയറിംഗ് കണക്ഷനുകൾ

  1. ഗ്രൗണ്ട് കണക്ഷൻ (GND): Connect the ground terminal to a clean, unpainted metal surface of the vehicle chassis. Ensure a solid, low-resistance connection.
  2. റിമോട്ട് ടേൺ-ഓൺ (REM): Connect this terminal to the remote output wire from your head unit. This wire signals the subwoofer to turn on and off with your vehicle's audio system. If your head unit does not have a remote output, you can use the "Auto Turn On" feature (see Product Overview).
  3. പവർ കണക്ഷൻ (+12V): Connect this terminal directly to the positive terminal of your vehicle's battery. An in-line fuse (not supplied, but typically included in wiring kits) must be installed within 18 inches (45 cm) of the battery.
  4. ഓഡിയോ സിഗ്നൽ ഇൻപുട്ട്:
    • ലോ-ലെവൽ ഇൻപുട്ട് (RCA): If your head unit has RCA pre-outs, connect them to the subwoofer's RCA inputs.
    • ഉയർന്ന തലത്തിലുള്ള ഇൻപുട്ട് (സ്പീക്കർ ലെവൽ): If your head unit does not have RCA outputs, connect the speaker wires from your head unit to the subwoofer's high-level input terminals.
  5. Wired Bass Remote: Plug the wired remote control into its dedicated port on the subwoofer's rear panel. Route the cable to a convenient location for the driver.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed, follow these steps to configure and operate your subwoofer:

  1. പ്രാരംഭ പവർ ഓൺ: Reconnect the vehicle's battery. Turn on your head unit. The Power indicator on the subwoofer should illuminate.
  2. Set Input Level (Gain):
    • Turn the Input Level knob on the subwoofer to its minimum setting.
    • Play a familiar piece of music with strong bass content through your head unit at about 75% of its maximum volume.
    • Slowly increase the Input Level knob on the subwoofer until you hear distortion, then back it off slightly until the sound is clean.
  3. Adjust Low Pass Filter (LPF): Set the LPF knob to blend the subwoofer's output seamlessly with your main speakers. A common starting point is between 80Hz and 120Hz. Experiment to find the best sound for your vehicle and music.
  4. Adjust Bass Boost: Use the Bass Boost knob sparingly. Excessive bass boost can lead to distortion and potential damage. Adjust to your preference for added low-end impact.
  5. Set Phase: Toggle the Phase switch (0° or 180°) while listening to music. Choose the setting that provides the most impactful and cohesive bass response. This helps align the subwoofer's sound waves with your main speakers.
  6. Using the Wired Bass Remote: The remote control allows you to adjust the overall bass level on the fly without needing to access the subwoofer unit directly. Turn the knob to increase or decrease the bass output.

മെയിൻ്റനൻസ്

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ സബ് വൂഫറിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു.

ട്രബിൾഷൂട്ടിംഗ്

If you experience issues with your MB Quart RW-108A subwoofer, refer to the table below for common problems and solutions.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
പവർ ഇല്ല / പവർ LED ഓഫാണ്Blown fuse; Loose power/ground connection; No remote turn-on signal.Check and replace fuse; Verify all power and ground connections are secure; Check remote wire connection or enable "Auto Turn On".
Protect LED Onഅമിത ചൂടാക്കൽ; സ്പീക്കർ വയറിങ്ങിൽ ഷോർട്ട് സർക്യൂട്ട്; കുറഞ്ഞ വോളിയംtage.Allow unit to cool; Check speaker wiring for shorts; Verify stable 12V power supply.
സൗണ്ട് ഔട്ട്പുട്ട് ഇല്ലNo audio signal input; Incorrect input level setting; Muted head unit.Check RCA/speaker input connections; Adjust Input Level (Gain); Ensure head unit is not muted and volume is up.
വികലമായ ശബ്ദംInput level too high; Bass boost too high; Incorrect LPF setting.Reduce Input Level; Decrease Bass Boost; Adjust LPF for better sound quality.
ദുർബലമായ ബാസ്Input level too low; Incorrect phase setting; LPF set too low.Increase Input Level; Toggle Phase switch; Increase LPF setting.

സ്പെസിഫിക്കേഷനുകൾ

മോഡലിൻ്റെ പേര്RW108APK3
സ്പീക്കർ തരംസബ് വൂഫർ
സബ് വൂഫർ വ്യാസം8 ഇഞ്ച്
സ്പീക്കർ പരമാവധി ഔട്ട്പുട്ട് പവർ600 വാട്ട്സ്
പ്രതിരോധം4 ഓം
കണക്റ്റിവിറ്റി ടെക്നോളജിവയർഡ്
പവർ ഉറവിടം12V DC
നിയന്ത്രണ രീതിറിമോട്ട്
ഉൽപ്പന്ന അളവുകൾ (L x W x H)5.12 x 3.64 x 0.89 inches (Note: This seems to be package dimensions, actual unit is 13 x 9.25 x 2.25 inches from image)
ഇനത്തിൻ്റെ ഭാരം12.96 പൗണ്ട് (5.89 കിലോഗ്രാം)
നിർമ്മാതാവ്MB Quart Audio
ജല പ്രതിരോധ നിലവാട്ടർ റെസിസ്റ്റൻ്റ് അല്ല

Note: Product dimensions listed in specifications may refer to packaging. Actual unit dimensions are approximately 13" L x 9.25" W x 2.25" H.

വാറൻ്റിയും പിന്തുണയും

This MB Quart product comes with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact MB Quart customer service through their official webസൈറ്റ് അല്ലെങ്കിൽ അംഗീകൃത സേവന കേന്ദ്രങ്ങൾ. വാറന്റി സാധൂകരണത്തിനായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.

അനുബന്ധ രേഖകൾ - RW-108A

പ്രീview MB ക്വാർട്ട് RA1 സീരീസ് കാർ Ampലിഫയർ ക്വിക്ക് സ്റ്റാർട്ട് ഇൻസ്റ്റലേഷൻ ഗൈഡ്
MB ക്വാർട്ട് RA1 സീരീസ് കാറിനായുള്ള സമഗ്രമായ ക്വിക്ക് സ്റ്റാർട്ട് ഇൻസ്റ്റലേഷൻ ഗൈഡ് ampസജ്ജീകരണം, വയറിംഗ്, ലെവൽ സജ്ജീകരണം, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്ന ലിഫയറുകൾ (RA1-150.2, RA1-280.4, RA1-300.1, RA1-750.1, RA1-710.5). വാറന്റി വിവരങ്ങളും സ്പെസിഫിക്കേഷനുകളും ഉൾപ്പെടുന്നു.
പ്രീview എംബി ക്വാർട്ട് ഡിസ്കസ്, റഫറൻസ്, പ്രീമിയം സബ് വൂഫർ ഇൻസ്റ്റലേഷൻ മാനുവലും സ്പെസിഫിക്കേഷനുകളും
എംബി ക്വാർട്ട് ഡിസ്കസ്, റഫറൻസ്, പ്രീമിയം സീരീസ് ഡ്യുവൽ വോയ്‌സ് കോയിൽ സബ്‌വൂഫറുകൾ എന്നിവയ്‌ക്കായുള്ള സമഗ്രമായ ഇൻസ്റ്റലേഷൻ മാനുവൽ, സാങ്കേതിക സവിശേഷതകൾ, തീലെ ചെറിയ പാരാമീറ്ററുകൾ, എൻക്ലോഷർ ശുപാർശകൾ, വയറിംഗ് ഡയഗ്രമുകൾ.
പ്രീview MB Quart RA1 Series Ampലിഫയർ ക്വിക്ക് സ്റ്റാർട്ട് ഇൻസ്റ്റലേഷൻ ഗൈഡ്
Comprehensive guide for installing MB Quart RA1 series amplifiers, including models RA1-150.2, RA1-280.4, RA1-300.1, RA1-750.1, and RA1-710.5. Covers power cable sizing, installation steps, system setup, and control adjustments.
പ്രീview MB Quart RW1 Series Subwoofer Wiring Diagrams, Specifications, and Enclosure Recommendations
Comprehensive guide to MB Quart RW1 series subwoofers, featuring detailed wiring diagrams for parallel and serial configurations, full technical specifications, and recommended vented enclosure parameters for models RW1-164, RW1-204, RW1-252, RW1-254, RW1-302, and RW1-304.
പ്രീview MB Quart MBQR-SUB-2 RZR-Tuned Audio Package Installation Manual
This installation manual provides detailed instructions for installing the MB Quart MBQR-SUB-2 10-inch subwoofer and 400-watt audio package into Polaris RZR vehicles. It covers preparation, disassembly, mounting, wiring, amplifier settings, initial testing, reassembly, and final inspection.
പ്രീview MB Quart NA2 Series Amplifiers & JL Wrangler Subwoofer Kit: Quick Start Installation Guide
Install your MB Quart NA2 series car audio amplifiers and the MBQJL-SUBR-1 Jeep Wrangler JL subwoofer upgrade kit with this comprehensive quick start installation guide. Learn about wiring, setup, and warranty.