ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your Aubric Smart LED WiFi Controller. This device allows you to control RGB/BGR/GRB LED strip lights wirelessly via a smartphone app, RF remote control, or voice commands through smart assistants like Alexa and Google Assistant.
സുരക്ഷാ വിവരങ്ങൾ
- Ensure all connections are secure before applying power to prevent damage.
- Use only with compatible 12-24V DC power adapters (not included).
- കൺട്രോളറിനെ ഈർപ്പത്തിനോ തീവ്രമായ താപനിലയ്ക്കോ വിധേയമാക്കരുത്.
- ഈ ഉപകരണം ഇൻഡോർ ഉപയോഗത്തിനായി മാത്രം രൂപകൽപ്പന ചെയ്തിട്ടുള്ളതാണ്.
പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉൾപ്പെടുന്നു:
- 2 LED Wifi Controllers
- 2 RF Remote Controls
- 2 4-Pin Connectors
Image: Two Aubric Smart LED WiFi Controllers shown with their respective RF remote controls. Each controller is white, rectangular, with a QR code and "WiFi" label, and features a 4-pin output and a DC power input cable.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Aubric Smart LED WiFi Controller allows for versatile control of your LED strip lights. It features a compact design and supports both Wi-Fi and RF remote control.
കൺട്രോളർ സവിശേഷതകൾ:
- Wi-Fi connectivity for smartphone app control.
- Compatibility with RGB, BGR, and GRB LED strip lights.
- ഇൻപുട്ട് വോളിയംtagഇ: 12-24V ഡിസി.
- Maximum Output: 100W.
RF വിദൂര നിയന്ത്രണം:
The included 24-key RF remote offers 360° wireless control without needing to target the sensor, providing a range of up to 20 meters.
Image: A single Aubric Smart LED WiFi Controller connected to a DC power plug, alongside its 24-key RF remote control. The remote has buttons for power, color selection (R, G, B, W), brightness, and various modes like Flash, Strobe, Fade, and Smooth.
Image: A comparison illustrating the difference between RF and IR remote controls. The RF remote (our updated version) shows 360° wireless control with a 20-meter range, while the IR remote (others) requires targeting the sensor with a 3-meter range.
സജ്ജീകരണ ഗൈഡ്
1. ഭൗതിക ബന്ധം
Follow these steps to connect your LED strip lights to the controller and power supply:
- LED സ്ട്രിപ്പ് ബന്ധിപ്പിക്കുക: Ensure the 4-pin connector from your LED strip aligns with the 4-pin output on the WiFi controller. Pay attention to the arrow indicators on both the connector and the controller to ensure correct polarity. Incorrect connection may damage the LED strip.
- പവർ സപ്ലൈ ബന്ധിപ്പിക്കുക: Connect a compatible 12-24V DC power adapter (not included) to the DC input jack of the WiFi controller. Ensure the power adapter is suitable for the wattage of your LED strip.
- പവർ ഓൺ: Once all connections are secure, plug the power adapter into a wall outlet.
Image: A diagram showing the physical connections. It illustrates connecting a 12V DC plug to the WiFi controller, which then connects to a 4-pin connector for the LED strip. A warning states to connect all parts before plugging in the power supply to avoid burnout.
ചിത്രം: ക്ലോസ്-അപ്പ് view demonstrating the correct connection of the LED strip to the WiFi controller. It highlights the importance of aligning the arrow on the LED strip connector with the arrow on the controller for proper polarity.
2. ആപ്പ് ഡൗൺലോഡും ഇൻസ്റ്റാളേഷനും
To control your LED lights via smartphone, download the "Magic Home Pro" app:
- Scan the QR code on the controller or visit the official download page:
- http://app.magichue.net/download/mgchomepro/AppDown.aspx
- Alternatively, search for "Magic Home Pro" in the Apple App Store or Google Play Store.
Image: A four-step visual guide for app setup. Step 1 shows downloading "Magic Home Pro". Step 2 shows opening the app and adding devices. Step 3 instructs to connect to the controller's Wi-Fi network (e.g., "LEDnetXXXXXX") in phone settings. Step 4 shows opening the app again to control the lights.
3. Wi-Fi നെറ്റ്വർക്കിലേക്ക് കണക്റ്റുചെയ്യുന്നു
- Ensure your LED controller is powered on.
- Open the "Magic Home Pro" app.
- In the app, select "Add Device" or follow the on-screen prompts to find new devices.
- Go to your phone's Wi-Fi settings and connect to the controller's Wi-Fi network, which typically starts with "LEDnet" followed by numbers/letters (e.g., "LEDnetXXXXXX").
- Return to the "Magic Home Pro" app. The app should now detect the controller and guide you through connecting it to your home Wi-Fi network (2.4GHz only).
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. Using the Magic Home Pro App
The Magic Home Pro app provides comprehensive control over your LED strip lights:
- വർണ്ണ നിയന്ത്രണം: Select from 16 million colors, adjust brightness, and set custom color patterns.
- സംഗീത സമന്വയം: The lights can synchronize with music played on your phone, creating dynamic lighting effects.
- ടൈമർ മോഡ്: Schedule lights to turn on/off at specific times, useful for waking up or setting ambient moods.
- ഗ്രൂപ്പ് നിയന്ത്രണം: Control multiple LED strips simultaneously by grouping them within the app.
- വിദൂര ആക്സസ്: Control your lights from anywhere via the app once connected to your home Wi-Fi network.
Image: A smartphone displaying the Magic Home app interface, showing a color wheel for light control. The image is set against a backdrop of a modern house with various rooms illuminated by LED strip lights, illustrating remote control capabilities.
Image: A group of people enjoying a party atmosphere with LED lights. A smartphone screen in the foreground shows the Magic Home app's music sync interface, indicating lights can beat with music.
2. Using the RF Remote Control
The 24-key RF remote control provides direct access to basic functions:
- പവർ ഓൺ/ഓഫ്: Use the "ON" and "OFF" buttons.
- വർണ്ണ തിരഞ്ഞെടുപ്പ്: Directly select Red, Green, Blue, or White, and other preset colors.
- തെളിച്ച ക്രമീകരണം: Increase or decrease light intensity.
- മോഡ് തിരഞ്ഞെടുക്കൽ: Choose from various dynamic modes like Flash, Strobe, Fade, and Smooth.
3. വോയ്സ് കൺട്രോൾ (അലക്സയും ഗൂഗിൾ അസിസ്റ്റന്റ്)
Integrate your controller with Amazon Alexa or Google Assistant for hands-free control:
- Ensure your controller is connected to your home Wi-Fi network via the Magic Home Pro app.
- Alexa അല്ലെങ്കിൽ Google Home ആപ്പ് തുറക്കുക.
- Enable the "Magic Home" skill/service and link your Magic Home account.
- Discover devices. You can now use voice commands such as: "Alexa, change the strip light to green" or "Hey Google, turn off the living room lights".
Image: A living room scene with LED strip lights illuminating a TV. An Amazon Echo Dot is visible. Text overlays demonstrate voice commands: "Alexa, change the strip light to green" and the response "Okay", indicating compatibility with Amazon Alexa and Google Assistant.
4. വർക്കിംഗ് മോഡുകൾ
The controller supports two primary working modes:
- ഹോട്ട്സ്പോട്ട് മോഡ്: For outdoor use or in locations without a Wi-Fi network (e.g., car, boat). Connect your phone directly to the controller's Wi-Fi hotspot.
- Wi-Fi Network Mode: Connects the controller to your home Wi-Fi router for remote control via the app from anywhere.
മെയിൻ്റനൻസ്
To ensure optimal performance and longevity of your Aubric Smart LED WiFi Controller:
- ഉപകരണം വൃത്തിയായും പൊടിയില്ലാതെയും സൂക്ഷിക്കുക. വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക.
- Avoid placing the controller in areas with high humidity or direct exposure to water.
- ദീർഘകാലത്തേക്ക് ഉപയോഗിക്കാത്തപ്പോൾ തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
ട്രബിൾഷൂട്ടിംഗ്
- കൺട്രോളർ Wi-Fi-യിലേക്ക് കണക്റ്റുചെയ്യുന്നില്ല:
- Ensure your home Wi-Fi network is 2.4GHz. The controller does not support 5GHz networks. Try rebooting your router and phone. Ensure your phone's VPN is off during initial setup. A strong Wi-Fi signal is recommended.
- LED സ്ട്രിപ്പ് പ്രകാശിക്കുന്നില്ല:
- Check all physical connections, especially the 4-pin connector's polarity (align arrows). Verify the power adapter is working and provides the correct voltagഇ (12-24V ഡിസി).
- RF Remote not responding:
- Ensure the remote has a working battery. The RF remote does not require line of sight, but extreme distances or heavy obstructions may affect performance. If controlling multiple units, ensure remotes are correctly paired to individual controllers if desired (refer to specific pairing instructions if available, not detailed in current data).
- ആപ്പ് നിയന്ത്രണ പ്രശ്നങ്ങൾ:
- Verify your phone is connected to the same Wi-Fi network as the controller (in Wi-Fi Network Mode). Ensure the Magic Home Pro app is updated to the latest version.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | Aubric |
| മോഡൽ | Smart LED WiFi Controller (B08SWK8H25) |
| ഇൻപുട്ട് വോളിയംtage | 12-24 വോൾട്ട് (ഡിസി) |
| പരമാവധി ഔട്ട്പുട്ട് വാട്ട്tage | 100 വാട്ട്സ് |
| നിയന്ത്രണ രീതി | App, Remote Control, Voice Control (IFTTT, Alexa, Google Assistant) |
| കണക്റ്റിവിറ്റി | Wi-Fi (2.4GHz), RF |
| ഇൻഡോർ/ഔട്ട്ഡോർ ഉപയോഗം | ഇൻഡോർ |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ഇനത്തിൻ്റെ ഭാരം | 2.39 ഔൺസ് |
| പാക്കേജ് അളവുകൾ | 7.6 x 4.57 x 0.67 ഇഞ്ച് |
വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the product packaging or contact Aubric customer service directly. Keep your purchase receipt for warranty claims.
