1. ആമുഖം
The Hunter PRO-HC600 is a commercial-grade, Wi-Fi enabled irrigation controller designed for managing up to 6 zones. It integrates with the Hydrawise platform, allowing for remote access, advanced diagnostics, and weather-based scheduling. This manual provides essential information for the installation, operation, and maintenance of your PRO-HC600 controller.
Figure 1: Hunter PRO-HC600 Controller with door open, displaying the touchscreen interface and an attached key.
പ്രധാന സവിശേഷതകൾ:
- 6-zone irrigation control.
- Integrated Wi-Fi for Hydrawise app connectivity.
- 2.75-inch full-color touchscreen for direct programming.
- Weather-based scheduling (Predictive Watering™) via Hydrawise.
- Compatibility with flow sensors and Clik sensors.
- മില്ലിamp sensor for wiring fault detection.
- Rugged, UV-resistant plastic cabinet with IP44 rating for indoor/outdoor use.
2 സുരക്ഷാ വിവരങ്ങൾ
WARNING: Read all safety warnings and instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure power is disconnected before performing any wiring or maintenance. The unit operates on 120V AC input and provides 24V AC output to valves.
- ഇൻസ്റ്റലേഷൻ: Install the controller in a location protected from direct sunlight and extreme weather conditions, even though it is rated for outdoor use. Ensure proper ventilation.
- വാട്ടർ എക്സ്പോഷർ: While the enclosure is IP44 rated, avoid direct water spray onto the unit, especially during wiring.
- യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ: All electrical wiring should be performed by a qualified electrician in accordance with local codes and regulations.
- കുട്ടികൾ: ഉപകരണം കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
3.1 കൺട്രോളർ മൌണ്ട് ചെയ്യുന്നു
- Select a suitable mounting location. The controller can be installed indoors or outdoors. For outdoor installations, choose a shaded area to prolong the life of the unit.
- Use appropriate screws and anchors for your mounting surface.
- Mount the controller securely to the wall, ensuring it is level.
Figure 2: PRO-HC600 Controller mounted on a wall, showing conduit entry points.
3.2 കൺട്രോളർ വയറിംഗ്
Before wiring, ensure the power to the controller is disconnected.
- Open the controller door to access the wiring terminals.
- Connect the common wire from your irrigation valves to the terminal marked COM.
- Connect each zone valve wire to its corresponding numbered terminal (1-6).
- If using a master valve or pump start relay, connect its wire to the terminal marked P/MV.
- For sensor integration (e.g., flow sensor, Clik sensor), connect the sensor wires to the designated sensor ports. Refer to the sensor's specific instructions for wiring details.
- Connect the 120V AC power cord to a grounded outlet. The controller comes with a pre-installed 5-foot cord.
ചിത്രം 3: ആന്തരിക view of the PRO-HC600, highlighting the wiring terminal block.
3.3 Initial Configuration and Wi-Fi Setup
- Once wired and powered on, the touchscreen will activate.
- Follow the on-screen prompts to set the date, time, and region.
- To connect to Wi-Fi, navigate to the ക്രമീകരണങ്ങൾ menu on the touchscreen.
- തിരഞ്ഞെടുക്കുക Wi-Fi സജ്ജീകരണം and choose your network from the list. Enter the password.
- Download the Hydrawise app from the App Store (iOS) or Google Play Store (Android).
- Create a Hydrawise account or log in if you already have one.
- Add your controller to your Hydrawise account by following the in-app instructions. You may need the controller's serial number, typically found on a label inside the unit.
4. കൺട്രോളർ പ്രവർത്തിപ്പിക്കൽ
4.1 ടച്ച്സ്ക്രീൻ ഇന്റർഫേസ് ഉപയോഗിക്കുന്നു
The 2.75-inch full-color touchscreen allows for direct control and programming without a mobile device.
- സോണുകൾ: Access individual zone controls, including manual run, test, and status.
- ക്രമീകരണങ്ങൾ: Configure system settings, Wi-Fi, date/time, and sensor options.
- നില: View current watering status, alerts, and system diagnostics.
4.2 Hydrawise App Operation
The Hydrawise app provides comprehensive remote control and monitoring capabilities.
Figure 4: Hydrawise app interface on a smartphone, showing watering schedules and weather data.
- ഡാഷ്ബോർഡ്: കഴിഞ്ഞുview of system status, upcoming watering, and weather.
- സോണുകൾ: Create and manage watering schedules for each zone. Set run times, start times, and watering days.
- സെൻസറുകൾ: Monitor connected sensors (e.g., flow, rain) and configure their actions.
- റിപ്പോർട്ടുകൾ: Access detailed reports on water usage, watering history, and system alerts.
- Predictive Watering™: The app automatically adjusts schedules based on local weather forecasts (temperature, rainfall, humidity, wind) to optimize water usage.
For detailed instructions on advanced programming and features within the Hydrawise app, refer to the Hydrawise online support documentation available at www.hydrawise.com/support.
5. പരിപാലനം
- വൃത്തിയാക്കൽ: ഇടയ്ക്കിടെ കൺട്രോളറിന്റെ പുറംഭാഗം മൃദുവായ, d തുണി ഉപയോഗിച്ച് തുടയ്ക്കുക.amp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- ഫേംവെയർ അപ്ഡേറ്റുകൾ: The controller's firmware is updated automatically via Wi-Fi. Ensure your controller remains connected to the internet for optimal performance and access to new features.
- വയറിംഗ് പരിശോധന: Annually inspect all wiring connections for corrosion or damage. Ensure all terminals are secure.
- സെൻസർ പരിശോധന: If using external sensors, periodically check them for debris or obstructions that might affect their operation.
6. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| കൺട്രോളർ ഓണാക്കുന്നില്ല. | No power to outlet; faulty power cord; internal fuse. | Check outlet with another device. Inspect power cord for damage. Contact support if issue persists. |
| Zone not watering. | Valve issue; wiring fault; schedule not set correctly; master valve/pump issue. | Check valve manually. Inspect wiring for breaks or loose connections. Verify schedule in app/touchscreen. Check P/MV wiring. |
| വൈഫൈ കണക്ഷൻ നഷ്ടപ്പെട്ടു. | Router issue; weak signal; incorrect password. | Restart router. Ensure controller is within Wi-Fi range. Re-enter Wi-Fi password on touchscreen. |
| മില്ലിamp sensor alert. | Short circuit or open circuit in zone wiring. | Inspect wiring for the affected zone for damage, cuts, or loose connections. |
For further troubleshooting assistance, visit the Hunter Hydrawise support page or contact Hunter customer service.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | പിഎച്ച്സി-600 |
| സോണുകൾ | 6 |
| ഇൻപുട്ട് വോളിയംtage | 120V എസി |
| Putട്ട്പുട്ട് വോളിയംtage | 24V എസി |
| ഡിസ്പ്ലേ തരം | Touchscreen (2.75 inch full-color) |
| Wi-Fi ഫ്രീക്വൻസി | 2.4 GHz |
| എൻക്ലോഷർ റേറ്റിംഗ് | IP44 (ഇൻഡോർ/doട്ട്ഡോർ) |
| മെറ്റീരിയൽ | UV-resistant Plastic |
| ഉൽപ്പന്ന അളവുകൾ | 3.75 x 7 x 8.6 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 3.06 പൗണ്ട് |
| യു.പി.സി | 611698295144 |
8. വാറൻ്റിയും പിന്തുണയും
The Hunter PRO-HC600 Smart WiFi Irrigation Controller is backed by a 2 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ, സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും ജോലികളിലെയും പോരായ്മകൾ ഉൾക്കൊള്ളുന്നു.
For warranty claims, technical support, or additional product information, please contact Hunter Industries customer service or visit their official webസൈറ്റ്:
- ഹണ്ടർ ഇൻഡസ്ട്രീസ് Webസൈറ്റ്: www.hunterindustries.com
- Hydrawise Support: www.hydrawise.com/support
Please have your model number (PHC-600) and purchase date available when contacting support.
