VOLTCRAFT SDM-2125 കോട്ടിംഗ് തിക്ക്നസ് ഗേജ് ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This user manual provides detailed instructions for the operation and maintenance of the VOLTCRAFT SDM-2125 Coating Thickness Gauge. This device is designed for high-precision and non-destructive measurements of coating thickness on both ferrous and non-ferrous metal substrates. It automatically detects the substrate material and determines the coating thickness using magnetic flux or eddy current principles.

The SDM-2125 weighs approximately 180 g and can store up to 500 data groups. It features a clear display that indicates whether measured values are within set limits (green for within limits, red for below limit, yellow for exceeding limit). For energy efficiency, the device automatically switches off after five minutes of inactivity. It supports both single-point and multi-point measurements, and its advanced algorithm for calculating measurement averages ensures quick and accurate results.

ചിത്രം 1: മുൻഭാഗം view of the VOLTCRAFT SDM-2125 Coating Thickness Gauge, showing the display and control buttons.

2 പ്രധാന സവിശേഷതകൾ

• Dual-Purpose Measurement: Suitable for both ferrous and non-ferrous metals.
• അളക്കൽ തത്വങ്ങൾ: Utilizes both magnetic flux and eddy current measurement methods.
• Automatic Substrate Detection: Automatically identifies the underlying material (ferrous or non-ferrous).
• ഡാറ്റ സംഭരണം: Capable of storing up to 500 data groups for comprehensive analysis.
• Flexible Measurement Modes: Offers two measurement options: single-point measurement or continuous multi-point measurement.
• Limit Value Indication: Visual feedback (green, red, yellow) to indicate if measurements are within, below, or above set limits.
• യാന്ത്രിക ഷട്ട്-ഓഫ്: Conserves battery life by automatically powering down after five minutes of inactivity.

Figure 2: The SDM-2125 displaying a measurement reading, highlighting its clear digital interface.

3. സജ്ജീകരണം

3.1 അൺപാക്കിംഗും പരിശോധനയും

1. Carefully remove the SDM-2125 device and all accessories from the packaging.
2. Inspect the device for any signs of damage during transit. If damage is found, do not proceed with setup and contact customer support.
3. Verify that all components listed in the packing list are present. This typically includes the main unit, calibration foils, and a zero-calibration plate.

3.2 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The SDM-2125 requires batteries for operation. (Note: Batteries are not included with the device.)

1. ഉപകരണത്തിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക.
2. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ തുറക്കുക.
3. കമ്പാർട്ടുമെന്റിനുള്ളിൽ സൂചിപ്പിച്ചിരിക്കുന്നതുപോലെ ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കിക്കൊണ്ട് ആവശ്യമായ ബാറ്ററികൾ ഇടുക.
4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

ചിത്രം 3: പിൻഭാഗം view of the SDM-2125, illustrating the battery compartment location.

3.3 പ്രാരംഭ പവർ ഓണും കാലിബ്രേഷനും

1. ഉപകരണം ഓണാക്കാൻ പവർ ബട്ടൺ അമർത്തുക.
2. Perform a zero-point calibration on a bare, uncoated metal substrate (ferrous and non-ferrous, if applicable) provided with the device. Follow the on-screen instructions or refer to the quick start guide for specific calibration steps.
3. Calibrate with the included calibration foils of known thickness to ensure accuracy across the measurement range.

4. ഓപ്പറേഷൻ

4.1 അടിസ്ഥാന അളവ്

1. ഉപകരണം ഓണാക്കിയിട്ടുണ്ടെന്നും കാലിബ്രേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
2. Place the probe of the gauge firmly and perpendicularly onto the coated surface to be measured.
3. The device will automatically detect the substrate material (Fe for ferrous, NFe for non-ferrous) and display the coating thickness reading.
4. Observe the color indicator on the display for limit value status (green, red, or yellow).

4.2 മെഷർമെന്റ് മോഡുകൾ

The SDM-2125 supports different measurement modes:

• സിംഗിൾ മെഷർമെന്റ് മോഡ്: For individual readings at specific points. Press the probe, read the value, then lift the probe.
• Continuous Measurement Mode: For scanning a surface and obtaining multiple readings rapidly. Keep the probe in contact and slide it across the surface. The device will continuously update the reading.

4.3 Data Storage and Recall

The device can store up to 500 data groups.

• To save a measurement, refer to the device's specific button functions (e.g., a 'Save' or 'Memory' button).
• To recall stored data, navigate through the memory function using the designated buttons. The device typically displays statistics like average, minimum, and maximum values for stored groups.

Figure 4: The SDM-2125 showing a measurement value, demonstrating its capability to display various data points including number of readings, average, min, and max.

5. പരിപാലനം

5.1 വൃത്തിയാക്കൽ

• Regularly clean the device's exterior with a soft, dry cloth.
• കഠിനമായ അഴുക്കിന്, അല്പം ഡിamp cloth with mild detergent can be used, but ensure no liquid enters the device.
• Pay special attention to keeping the measurement probe clean and free of debris, as this can affect accuracy.
• അബ്രാസീവ് ക്ലീനറുകളോ, ലായകങ്ങളോ, ശക്തമായ രാസവസ്തുക്കളോ ഉപയോഗിക്കരുത്.

5.2 സംഭരണം

• When not in use for extended periods, remove the batteries to prevent leakage and damage to the device.
• Store the device in its original case or a protective pouch to prevent scratches and impacts.
• Store in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.

5.3 കാലിബ്രേഷൻ പരിശോധന

• Periodically check the calibration of the device using the provided calibration foils and zero-calibration plate.
• Recalibrate if readings are inconsistent or if the device has been subjected to significant temperature changes or impacts.

6. പ്രശ്‌നപരിഹാരം

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries regarding your VOLTCRAFT SDM-2125 Coating Thickness Gauge, please refer to the warranty card included with your product or visit the official VOLTCRAFT webസൈറ്റ്.

You can also contact the seller, Conrad Electronic SE, for assistance with your purchase.

ഓൺലൈൻ ഉറവിടങ്ങൾ:

• VOLTCRAFT Official Webസൈറ്റ്: www.voltcraft.com (General link, specific link not provided in input)
• Conrad Electronic SE Seller Page: വിൽപ്പനക്കാരൻ്റെ വിവരങ്ങൾ