ഇവോറ നാസൽ ഫിറ്റ്പാക് ഉപയോക്തൃ മാനുവൽ

ആമുഖം

This manual provides essential information for the proper use, setup, operation, and maintenance of your Evora Nasal Fitpak. Please read this manual thoroughly before using the product to ensure safe and effective operation.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Evora Nasal Fitpak is designed to provide a comfortable and effective interface for CPAP therapy. It includes three nasal cushion seals (Small, Medium, Large) to ensure a personalized fit.

ചിത്രം 1: Evora Nasal Fitpak showing the complete mask assembly including headgear and nasal cushion.

ഉൾപ്പെടുന്ന ഘടകങ്ങൾ:

• Evora Nasal Mask Frame
• ഹെഡ്ഗിയർ അസംബ്ലി
• Nasal Cushion Seals (Small, Medium, Large)
• Short Tube with Swivel

സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Use contents included with Evora Fitpak only. Check correct humidity setting on unit to prevent rainout or leaking.

Always consult your healthcare provider for specific instructions regarding your CPAP therapy and mask usage.

സജ്ജമാക്കുക

Proper setup is crucial for effective therapy and comfort. Follow these steps to prepare your Evora Nasal Fitpak for use.

1. Select the Correct Cushion Size: The Fitpak includes Small, Medium, and Large nasal cushion seals. Try each size to determine which provides the best seal and comfort without causing pressure points. The cushion should sit comfortably under your nose.
2. Attach the Nasal Cushion: Align the chosen nasal cushion with the mask frame and press firmly until it clicks securely into place.
3. Connect the Headgear: Attach the headgear straps to the designated points on the mask frame. Ensure the headgear is not twisted.
4. Connect to CPAP Device: Attach the short tube of the mask to your CPAP machine's main air tubing.

ചിത്രം 2: Adjusting the headgear for a secure and comfortable fit. Ensure the mask sits properly under the nose.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once assembled, the Evora Nasal Fitpak is ready for use with your CPAP therapy device.

1. Put on the Mask: Hold the mask frame with the cushion facing your nose. Place the headgear over your head like a cap.
2. ഫിറ്റിനായി ക്രമീകരിക്കുക: Gently pull the headgear straps to achieve a snug but comfortable fit. The nasal cushion should sit directly under your nose, as stated in the directions: "Use with Nasal cushions seals only". Avoid overtightening, which can cause discomfort or skin marks.
3. ചോർച്ച പരിശോധിക്കുക: Turn on your CPAP machine. Lie down in your typical sleeping position. Check for any air leaks around the nasal cushion. Minor adjustments to the headgear or cushion position may be necessary to eliminate leaks.

ചിത്രം 3: ഫ്രണ്ട് view of a user wearing the Evora Nasal Fitpak, demonstrating proper placement.

ചിത്രം 4: The Evora Nasal Fitpak in use during sleep, connected to a CPAP machine.

പരിപാലനവും ശുചീകരണവും

Regular cleaning of your Evora Nasal Fitpak is essential for hygiene and to prolong the life of the mask components.

പ്രതിദിന ശുചീകരണം:

• Disconnect the nasal cushion and short tube from the mask frame.
• Wash the nasal cushion and short tube in warm, soapy water using a mild soap.
• ശുദ്ധജലം ഉപയോഗിച്ച് നന്നായി കഴുകുക.
• Allow components to air dry completely out of direct sunlight before reassembling.

പ്രതിവാര ശുചീകരണം:

• Disassemble all mask components, including the headgear.
• Wash the mask frame and headgear in warm, soapy water using a mild soap.
• നന്നായി കഴുകിക്കളയുക, വായുവിൽ ഉണങ്ങാൻ അനുവദിക്കുക.

പ്രധാനപ്പെട്ടത്: Do not use harsh cleaning agents, bleach, alcohol, or solutions containing strong chemicals, as these can damage the mask materials.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter with your Evora Nasal Fitpak.

Issue: Air Leaks

• സാധ്യമായ കാരണം: Mask is not properly seated or headgear is too loose/tight.
• പരിഹാരം: Adjust the headgear straps to achieve a snug fit. Ensure the nasal cushion is correctly positioned directly under your nose. Try a different size nasal cushion from the Fitpak to ensure optimal seal.
• സാധ്യമായ കാരണം: Nasal cushion is worn or damaged.
• പരിഹാരം: Inspect the nasal cushion for tears, cracks, or hardening. Replace the cushion if any damage is observed.

Issue: Discomfort or Red Marks

• സാധ്യമായ കാരണം: Headgear is too tight.
• പരിഹാരം: Loosen the headgear straps. The mask should be secure but not cause excessive pressure.
• സാധ്യമായ കാരണം: Incorrect cushion size.
• പരിഹാരം: Experiment with the different cushion sizes included in the Fitpak to find the most comfortable fit.

Issue: Difficulty Breathing or Restricted Airflow

• സാധ്യമായ കാരണം: Mask or tubing is clogged or dirty.
• പരിഹാരം: Clean all mask components and check the CPAP tubing for any obstructions.
• സാധ്യമായ കാരണം: Incorrect CPAP pressure setting.
• പരിഹാരം: Consult your healthcare provider to verify your prescribed CPAP pressure settings. Do not adjust pressure settings without professional guidance.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, returns, or technical support, please refer to the official Fisher & Paykel Healthcare webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത ഡീലറെ ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

നിർമ്മാതാവിനെ ബന്ധപ്പെടുക: Please visit the official FP (Fisher & Paykel) webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കുമുള്ള സൈറ്റ്.