1. ആമുഖവും അവസാനവുംview
The Siemens PN Series Load Center is designed to provide a high-quality, feature-rich solution for various electrical applications. This load center offers maximum flexibility and incorporates labor-saving features to assist during installation. Key features include compatibility with Plug-on Neutral breakers, a patented Insta-Wire neutral/ground system, convertibility, copper bussing, and mounting tabs on the trim. These design elements are engineered to reduce installation time and enhance overall flexibility.
2 സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: This product must be installed, adjusted, and serviced by a qualified electrician or licensed personnel only. Improper installation or maintenance can result in electric shock, fire, or other hazards, leading to serious injury or death. Always disconnect power at the main service panel before working on this equipment. Follow all local and national electrical codes and regulations. Do not attempt to modify the load center or its components.
3. ഉൽപ്പന്ന സവിശേഷതകൾ
- Plug-On Neutral Design: Facilitates simple and quick installation of compatible breakers.
- Spacious Wire Bending Room: Provides over 4 inches of space for wire bending, simplifying wiring.
- Secure and Reliable Installation: Engineered for confident and stable connections.
- Factory Installed Ground Bars: Includes two ground bars for convenience.
- സിസ്റ്റം അനുയോജ്യത: Designed for 1-phase, 3-wire, 120/240V electrical systems.
- High Interrupt Rating: Features a 100,000 AIC interrupt rating for enhanced safety.
- NEMA Type 1 Enclosure: ഇൻഡോർ ഉപയോഗത്തിന് അനുയോജ്യം.
- Copper Bussing: Ensures excellent conductivity and durability.
4 സ്പെസിഫിക്കേഷനുകൾ
| സ്പെസിഫിക്കേഷൻ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | സീമെൻസ് |
| മോഡൽ നമ്പർ | PN2020L1125C |
| എസി അഡാപ്റ്റർ കറന്റ് | 125 Amps |
| മെറ്റീരിയൽ | ചെമ്പ് |
| സർക്യൂട്ടുകളുടെ എണ്ണം | 20 |
| ഘട്ടം തരം | സിംഗിൾ ഫേസ് |
| ഇനത്തിൻ്റെ ഭാരം | 22.8 പൗണ്ട് |
| ഉൽപ്പന്ന അളവുകൾ | 14.25 x 3.88 x 21 ഇഞ്ച് |
| നിറം | ചാരനിറം |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | ലോഡ് സെന്റർ, ഇൻസ്ട്രക്ഷൻ ഷീറ്റ് |
5. ഇൻസ്റ്റലേഷൻ
Installation of the Siemens PN Series Load Center should only be performed by a qualified electrician in accordance with all applicable electrical codes. The following provides an overview of key components and features relevant to installation.
Installation Video: Siemens Plug-On Neutral Load Center and Breakers
This official Siemens video demonstrates the installation process for Plug-On Neutral breakers within the load center. It highlights the simplified wiring practice, the spacious wire bending room, and the secure connection mechanism, providing a visual guide to the product's key installation benefits.
6. ഓപ്പറേഷൻ
Once properly installed and wired, the Siemens PN Series Load Center functions as the central distribution point for electrical power within a building. Circuit breakers installed in the load center protect individual circuits from overcurrents and short circuits. In the event of an electrical fault, a circuit breaker will trip, interrupting the flow of electricity to that circuit. To restore power, identify and correct the fault, then reset the tripped breaker by moving its handle fully to the 'OFF' position and then to the 'ON' position.
7. പരിപാലനം
Regular maintenance of the load center is minimal but important for continued safe operation. Periodically, a qualified electrician should inspect the load center for any signs of wear, corrosion, loose connections, or damage. Ensure the area around the load center remains clear and accessible. Do not store flammable materials near the load center. Cleaning should be limited to wiping the exterior with a dry cloth; never use liquids or abrasive cleaners inside the panel.
8. പ്രശ്നപരിഹാരം
If an electrical issue occurs, such as a tripped circuit breaker, follow these general troubleshooting steps:
- ട്രിപ്പ്ഡ് ബ്രേക്കറെ തിരിച്ചറിയുക: Locate the breaker with its handle in the middle or 'OFF' position.
- Disconnect Appliances: Unplug or turn off all appliances and lights on the affected circuit.
- Reset the Breaker: Firmly push the breaker handle to the full 'OFF' position, then to the full 'ON' position.
- നിരീക്ഷിക്കുക: If the breaker trips again immediately, there is likely a persistent fault (e.g., short circuit or overloaded circuit). Do not attempt to reset it repeatedly.
- ഒരു പ്രൊഫഷണലുമായി ബന്ധപ്പെടുക: For persistent issues or any concerns regarding electrical safety, contact a qualified electrician. Do not attempt repairs yourself.
9. വാറൻ്റിയും പിന്തുണയും
This Siemens product is covered by the manufacturer's standard warranty. For specific warranty details, terms, and conditions, please refer to the documentation included with your purchase or visit the official Siemens website. For technical support, product inquiries, or to locate authorized service providers, please visit the ആമസോണിലെ സീമെൻസ് സ്റ്റോർ or the main Siemens support portal.