WOODBRIDGE 67-inch Acrylic Freestanding Bathtub

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your WOODBRIDGE 67-inch Acrylic Freestanding Bathtub, Model BTS1609. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഇൻസ്റ്റാളേഷൻ സമയത്ത് എല്ലാ പ്രാദേശിക പ്ലംബിംഗ്, കെട്ടിട കോഡുകളും പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Installation should be performed by a certified and licensed professional.
• Do not over-tighten drain nuts; snug is sufficient to prevent damage.
• Always test for leaks after installation by filling the tub with cold water above the overflow level.
• The bathtub features a non-slip bottom surface, meeting ASTM standards for slip resistance, to enhance user safety.
• Avoid using abrasive cleaners or tools that could scratch the acrylic surface.
• Supervise children and individuals with limited mobility when using the bathtub.

3. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.

• WOODBRIDGE 67-inch Freestanding Bathtub
• Matte Black Drain and Overflow Cover
• Installation and Care Guide (this manual)
• Drain Kit Installation Manual

4 സ്പെസിഫിക്കേഷനുകൾ

വിശദമായ അളവുകൾക്ക്, താഴെയുള്ള ഡയഗ്രം കാണുക:

ചിത്രം: മുകളിൽ നിന്ന് താഴേക്ക് view of the WOODBRIDGE BTS1609 bathtub.

Image: WOODBRIDGE BTS1609 bathtub filled with water.

5. ഇൻസ്റ്റലേഷൻ

Refer to the official installation video and the included drain kit manual for detailed steps. Professional installation is recommended.

പ്രധാന ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. അൺപാക്കിംഗും പരിശോധനയും: Carefully remove the bathtub from its packaging. Inspect for any damage. Ensure all parts, including the drain and overflow cover, are present.
2. Overflow Trim Installation: Apply clear silicone caulking to the tub overflow trim piece. Insert the overflow trim flat and level. Secure it with blue painter's tape until the caulking cures (approx. 24 hours).
   

   Image: Detail of the matte black overflow.

3. Drain Nut Tightening: With the tub inverted, fill the grooved gasket with silicone and install it with the groove and silicone facing up. Tighten the drain nut in place. Be careful not to over-tighten; it only needs to be snug.
   

   Image: Matte Black Drain and Overflow.

4. ചോർച്ച പരിശോധന: Push the pop-up drain into a closed position. Fill the bathtub with cold water above the overflow level. Check for any leaks around the drain and pipe connections.
5. Marking Tub Location: Once the tub is in its desired final position, mark its outline on the floor with an erasable pencil.
6. Leveling the Bathtub: Use a 24-inch level to adjust the tub legs. Leave a 1/8-inch to 1/4-inch gap between the rim of the tub and the level. Tighten the nuts on the legs to secure them in place.
7. Connecting to Plumbing: Attach your flanged tail piece (provided by installer) to the tub drain and tighten. Connect the tub's drain assembly to the floor drain (P-trap). This may require underfloor access or specific slab floor installation kits.
8. Final Sealing: Apply silicone caulking to the base rim of the tub where it meets the floor to create a watertight seal.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your WOODBRIDGE freestanding bathtub is designed for comfortable soaking. To operate:

• പൂരിപ്പിക്കൽ: Ensure the drain stopper is closed. Fill the tub with water to your desired level, being mindful of the overflow limit.
• ഡ്രെയിനിംഗ്: To drain the tub, open the drain stopper. The integrated overflow system will prevent overfilling.
• നോൺ-സ്ലിപ്പ് ഉപരിതലം: The bathtub features a non-slip bottom for added safety during entry and exit.
  

  Image: Non-Slip design Bathtub Bottom for Added Safety.

7. പരിപാലനവും ശുചീകരണവും

To maintain the pristine condition of your WOODBRIDGE bathtub, follow these guidelines:

• പതിവ് വൃത്തിയാക്കൽ: The bathtub's LUCITE acrylic surface is easy to clean, stain-resistant, and scratch-resistant. Use a soft cloth and non-abrasive liquid cleaners.
• കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക: Do not use abrasive powders, steel wool, or harsh chemical cleaners, as these can damage the acrylic finish.
• കറ നീക്കംചെയ്യൽ: For stubborn stains, a mild solution of vinegar and water can be used. Rinse thoroughly after cleaning.
• സ്ക്രാച്ച് റിപ്പയർ: Minor scratches on the LUCITE acrylic surface can often be buffed out with a fine-grit polishing compound designed for acrylics.
• ഡ്രെയിൻ അറ്റകുറ്റപ്പണി: Periodically remove and clean the drain stopper to prevent clogs from hair and soap residue.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your bathtub, refer to the following common solutions:

• ചോർച്ച: If leaks occur around the drain or overflow, re-check all connections for tightness. Ensure silicone sealant was properly applied during installation. If the issue persists, contact a professional plumber.
• മന്ദഗതിയിലുള്ള ഡ്രെയിനേജ്: A slow drain is typically caused by a clog. Remove the drain stopper and clear any hair or debris. If the clog is further down the pipe, a plumbing snake may be required.
• ജലാശയങ്ങൾ: Water spots can be removed with a soft cloth and a mild cleaner. To prevent them, wipe the tub dry after each use.

9. വാറൻ്റിയും പിന്തുണയും

WOODBRIDGE provides a 1-Year limited warranty against defects in material and workmanship for this product. For warranty claims, technical assistance, or to order replacement parts, please contact the WOODBRIDGE US-based product support team. Our team is available to assist with any sales or product-oriented queries.

This product complies with CSA B45.5-17/IAPMO Z124-2017 standards and meets the Massachusetts Plumbing & Gas Code.