കാർസൺ 500501007

Carson FS Reflex Stick II 2.4GHz 6-Channel Radio Control System User Manual

മോഡൽ: 500501007

ആമുഖം

This manual provides detailed instructions for the Carson FS Reflex Stick II 2.4GHz 6-channel radio control system. This high-quality, modern remote control is designed for universal use with various RC vehicles and ships. It features 6 independently controllable channels, making it compatible with TAMIYA MF and DMD units. Please read this manual thoroughly before operating the device to ensure safe and correct usage.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

പാക്കേജ് ഉള്ളടക്കം

അൺപാക്ക് ചെയ്യുമ്പോൾ, എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ദയവായി പരിശോധിക്കുക:

Note: AA batteries for the transmitter are not included and must be purchased separately.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Carson FS Reflex Stick II transmitter features a robust design with a carbon look. It includes two control sticks for primary functions and additional buttons/switches for auxiliary channels.

Carson FS Reflex Stick II 2.4GHz 6-Channel Transmitter

ചിത്രം 1: ഫ്രണ്ട് view of the Carson FS Reflex Stick II 2.4GHz 6-Channel Transmitter. This image shows the overall layout of the transmitter, including the two main control sticks, the 2.4GHz antenna, and the various switches and buttons for channel control.

Transmitter Components:

Close-up of 6-channel switch on Carson FS Reflex Stick II transmitter

ചിത്രം 2: ക്ലോസ് അപ്പ് view of an auxiliary 6-channel switch on the Carson FS Reflex Stick II transmitter. This image highlights one of the toggle switches used for controlling additional functions on your RC model.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റലേഷൻ (ട്രാൻസ്മിറ്റർ)

  1. ട്രാൻസ്മിറ്ററിന്റെ പിൻഭാഗത്തുള്ള ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
  2. ശരിയായ പോളാരിറ്റി (+/-) ഉറപ്പാക്കിക്കൊണ്ട് 4 പുതിയ AA ബാറ്ററികൾ ഇടുക.
  3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

2. റിസീവർ കണക്ഷൻ

Connect the receiver to your RC model's electronic speed controller (ESC) and servos according to your model's specific instructions. Ensure all connections are firm and correctly oriented.

3. ട്രാൻസ്മിറ്ററും റിസീവറും ബന്ധിപ്പിക്കൽ

The transmitter and receiver are usually pre-bound from the factory. If re-binding is necessary:

  1. Ensure the transmitter is turned OFF.
  2. Connect the bind plug (not included, usually comes with receiver or ESC) to the BIND/VCC port on the receiver.
  3. Power on the receiver. The receiver's LED should flash rapidly.
  4. Press and hold the BIND button on the transmitter while turning it ON.
  5. Release the BIND button after a few seconds. The receiver's LED should now be solid, indicating a successful bind.
  6. Turn off the receiver, then the transmitter. Remove the bind plug from the receiver.
  7. Restart the system (transmitter ON first, then receiver) to confirm the bind.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്

2. Basic Control Functions

3. Auxiliary Channel Control

The two additional switches (one push-button, one toggle switch) control channels 5 and 6. These are typically used for non-proportional functions:

4. Servo Reverse

If a servo moves in the opposite direction to your stick input, use the corresponding servo reverse switch on the transmitter to correct its direction. There is a servo reverse switch for each channel.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

സംഭരണം

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ട്രാൻസ്മിറ്ററിലേക്ക് വൈദ്യുതിയില്ലഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്ത ബാറ്ററികൾ.ബാറ്ററികൾ പുതിയ AA ബാറ്ററികൾ ഉപയോഗിച്ച് മാറ്റിസ്ഥാപിക്കുക, ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കുക.
No control response from modelTransmitter and receiver not bound; receiver not powered; incorrect connections.Perform binding procedure; check receiver power supply; verify all connections.
Servo moves in wrong directionIncorrect servo direction setting.Adjust the corresponding servo reverse switch on the transmitter.
Limited range or intermittent controlLow transmitter/receiver battery; interference; damaged antenna.Replace batteries; operate in an open area away from other 2.4GHz devices; check antennas for damage.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the official Carson webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

അനുബന്ധ രേഖകൾ - 500501007

പ്രീview CARSON Reflex Stick Multi Pro 14 Channel 2.4 GHz FHSS Radio Control System User Manual
Comprehensive user manual for the CARSON Reflex Stick Multi Pro 14 Channel 2.4 GHz FHSS Digital Proportional Radio Control System. Includes setup, operation, safety, warranty, and technical specifications.
പ്രീview Carson RC Akuma Transmitter: Operation and Troubleshooting Guide
Comprehensive guide to operating and troubleshooting the Carson RC Akuma remote control transmitter, including setup, binding, battery installation, and common operational issues.
പ്രീview കാർസൺ എംഎം-350 മൈക്രോബ്രൈറ്റ് പ്ലസ് എൽഇഡി ലൈറ്റഡ് പോക്കറ്റ് മൈക്രോസ്കോപ്പ് അഡാപ്റ്റർ ക്ലിപ്പ് ഉപയോക്തൃ ഗൈഡ്
അഡാപ്റ്റർ ക്ലിപ്പോടുകൂടിയ CARSON MM-350 മൈക്രോബ്രൈറ്റ് പ്ലസ് LED ലൈറ്റഡ് പോക്കറ്റ് മൈക്രോസ്കോപ്പിനുള്ള സജ്ജീകരണം, ഉപയോഗം, സുരക്ഷാ മുന്നറിയിപ്പുകൾ എന്നിവയുൾപ്പെടെയുള്ള നിർദ്ദേശങ്ങളും സ്പെസിഫിക്കേഷനുകളും.
പ്രീview Carson Linde H40D Radio Controlled Forklift - Instruction Manual
Comprehensive user manual for the Carson Linde H40D radio-controlled forklift. Includes setup, operation, safety instructions, troubleshooting, and technical specifications.
പ്രീview കാർസൺ എംഎം-310 മൈക്രോബ്രൈറ്റ് പ്ലസ് സ്മാർട്ട്ഫോൺ അഡാപ്റ്റർ ക്ലിപ്പ് ഉപയോക്തൃ ഗൈഡ്
മാഗ്നിഫൈഡ് ഫോട്ടോഗ്രാഫിക്കും വീഡിയോഗ്രാഫിക്കും വേണ്ടി കാർസൺ മൈക്രോസ്കോപ്പുകളുള്ള സ്മാർട്ട്‌ഫോൺ ഉപയോഗം സാധ്യമാക്കുന്ന കാർസൺ എംഎം-310 മൈക്രോബ്രൈറ്റ് പ്ലസ് സ്‌മാർട്ട്‌ഫോൺ അഡാപ്റ്റർ ക്ലിപ്പിനുള്ള നിർദ്ദേശങ്ങളും സ്പെസിഫിക്കേഷനുകളും.
പ്രീview CARSON CL-65 MagniFlex LED ലൈറ്റഡ് ഫ്ലെക്സിബിൾ-ആം മാഗ്നിഫയർ യൂസർ ഗൈഡ്
CARSON CL-65 MagniFlex LED ലൈറ്റഡ് ഫ്ലെക്സിബിൾ-ആർം മാഗ്നിഫയറിനുള്ള നിർദ്ദേശങ്ങളും സ്പെസിഫിക്കേഷനുകളും, ബാറ്ററി ഇൻസ്റ്റാളേഷൻ, C-cl എന്നിവയുൾപ്പെടെ.amp അറ്റാച്ച്മെന്റ്, ഡിസി അഡാപ്റ്റർ ഉപയോഗം.