Feit Electric Smart WiFi Door and Window Sensor

ആമുഖം

Thank you for choosing the Feit Electric Smart WiFi Door and Window Sensor. This device is designed to provide remote monitoring of your doors and windows, sending alerts directly to your Feit Electric app when an opening is detected. This manual will guide you through the installation, setup, operation, and maintenance of your sensor.

Figure 1: Main unit of the Feit Electric Smart WiFi Door and Window Sensor.

സജ്ജമാക്കുക

1 മൗണ്ടിംഗ് ഓപ്ഷനുകൾ

The sensor can be mounted using either the included screws or the double-sided adhesive tape. Ensure the mounting surface is clean and dry before installation.

സ്ക്രൂ മൗണ്ടിംഗ്:

1. Press the latch button on the sensor and pull the back plate down to release it.
2. Gently pull the magnet away from its back plate.
3. Align the sensor and magnet back plates on the desired door/window and frame. Mark the screw positions with a pencil.
4. Use the mounting screws to attach the magnet mounting plate to the door or window, and the sensor mounting plate to the frame, or vice versa.

Figure 2: The sensor and magnet components installed on a door frame using screws.

Double-Sided Tape Mounting:

1. Attach the double-sided tape to the bottom of both the sensor and magnet mounting plates.
2. Clean the mounting area thoroughly on the door/window and frame.
3. Attach the magnet mounting plate to the door or window, and the sensor mounting plate to the frame, or vice versa.

പ്രധാനപ്പെട്ടത്: Ensure the gap between the magnet and the sensor is no more than 0.5 inches (1.27 cm) for proper operation. The arrows on the sensor and magnet should align.

ചിത്രം 3: ക്ലോസപ്പ് view of the sensor and magnet correctly aligned on a door frame.

2. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Open the sensor battery compartment.
2. Insert two AAA batteries, ensuring correct polarity. If batteries are already present, remove any protective tags.
3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് അടയ്ക്കുക.

3. Connecting to the Feit Electric App

Before connecting, ensure your mobile device is connected to a 2.4 GHz Wi-Fi network. This device is not compatible with 5 GHz networks.

Video 1: This video demonstrates the installation and app connection process for the Feit Electric Smart Door & Window Sensor.

EZ Mode Connection:

1. Turn on the sensor by pressing the reset button. The LED indicator should rapidly blink blue. If not, press and hold the reset button for at least 10 seconds until it blinks rapidly.
2. Open the Feit Electric app. Choose your desired location and tap "Add Device" or the "+" icon in the upper right corner.
3. Select "Controls & Sensors" then "Door & Window Sensor".
4. Confirm the indicator light is rapidly blinking blue and enter your 2.4 GHz Wi-Fi network password.
5. The app will begin adding the device. Wait for the process to complete.

AP Mode Connection (Alternative):

1. If EZ Mode fails, select "AP Mode" in the upper right corner of the "Add Device" menu in the app.
2. Press and hold the reset button on the sensor until the LED indicator slowly blinks blue.
3. In the app, confirm the indicator light is slowly blinking blue and enter your 2.4 GHz Wi-Fi network password.
4. The app will prompt you to connect to the device's Wi-Fi hotspot. Go to your phone's Wi-Fi settings and connect to the network starting with "SmartLife-XXXX".
5. Return to the Feit Electric app. The connection process will begin. Wait for the device to be added successfully.

ഓപ്പറേഷൻ

Once connected, the Feit Electric Smart WiFi Door and Window Sensor will monitor the open/closed status of your door or window. You can view the current status and history directly within the Feit Electric app.

• Real-time Status: The app displays whether the monitored door or window is open or closed.
• അറിയിപ്പുകൾ: Configure the app to send alerts to your smart device when an opening is detected.
• ഓട്ടോമേഷൻ: Set up custom automations within the app, such as triggering other smart devices when the sensor detects an event.

Figure 4: The Feit Electric app interface displaying the 'Closed' status of a door sensor.

മെയിൻ്റനൻസ്

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ:

The sensor operates on two AAA batteries. When the battery level is low, you may receive a notification through the Feit Electric app. To replace the batteries:

1. Press the latch button and remove the back plate of the sensor.
2. Carefully remove the old AAA batteries.
3. ശരിയായ പോളാരിറ്റി (+/-) ഉറപ്പാക്കിക്കൊണ്ട് രണ്ട് പുതിയ AAA ബാറ്ററികൾ ഇടുക.
4. Reattach the back plate to the sensor.

വൃത്തിയാക്കൽ:

Wipe the sensor and magnet with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the device.

ട്രബിൾഷൂട്ടിംഗ്

• Sensor not connecting to Wi-Fi:
  • Ensure your Wi-Fi network is 2.4 GHz. The sensor is not compatible with 5 GHz networks.
  • ആപ്പിൽ വൈഫൈ പാസ്‌വേഡ് ശരിയായി നൽകിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Make sure the sensor's LED indicator is blinking rapidly (EZ Mode) or slowly (AP Mode) as required by the app. If not, perform a reset by pressing and holding the reset button for 10 seconds.
  • Move the sensor closer to your Wi-Fi router to improve signal strength.
• Sensor not detecting open/closed status:
  • Check that the sensor and magnet are correctly aligned and the gap between them is no more than 0.5 inches (1.27 cm).
  • Verify that the batteries are properly installed and not depleted. Replace if necessary.
• No notifications received:
  • Check your Feit Electric app settings to ensure notifications are enabled for the sensor.
  • Verify your phone's notification settings for the Feit Electric app.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി

This Feit Electric Smart WiFi Door and Window Sensor comes with a 1 വർഷത്തെ വാറൻ്റി from the date of purchase. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Feit Electric webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

പിന്തുണ

For additional support, frequently asked questions, or to learn more about other Feit Electric smart home products, please visit the official Feit Electric webസൈറ്റ്:

www.feit.com

You can also contact Feit Electric customer service for personalized assistance.