Recaceik Recaceik

Recaceik Corner Hall Tree Coat Rack User Manual

Model: Recaceik | Brand: Recaceik

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Recaceik Corner Hall Tree is a multi-functional furniture piece designed to optimize space in entryways, hallways, closets, and living areas. It integrates a coat rack, storage shelves, and a shoe bench into a single compact unit. Its rustic brown engineered wood and sturdy metal frame offer both durability and a stylish aesthetic that complements various home decors.

Recaceik Corner Hall Tree Coat Rack in an entryway

Figure 1: The Recaceik Corner Hall Tree Coat Rack, showcasing its multi-functional design in a home setting.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all instructions before assembly and use. Keep these instructions for future reference. Failure to follow these instructions may result in injury or product damage.

3. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക. ഏതെങ്കിലും ഭാഗങ്ങൾ നഷ്ടപ്പെട്ടിട്ടുണ്ടെങ്കിലോ കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടെങ്കിലോ, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

All components of the Recaceik Corner Hall Tree laid out on a rug

ചിത്രം 2: ഓവർview of all parts included in the package before assembly.

Table 1: Estimated Package Contents
ഘടകംവിവരണംഅളവ്
മെറ്റൽ ഫ്രെയിം വിഭാഗങ്ങൾMain structural components of the hall tree.വിവിധ
മരപ്പലകകൾShelves and back panel for hooks.3 (Top, Bench, Hook Panel)
Mesh Shoe RacksLower shelves for shoe storage.2
ഇരട്ട ഹുക്കുകൾFor hanging coats, bags, etc.6
ക്രമീകരിക്കാവുന്ന പാദങ്ങൾFor leveling the unit on uneven floors.4
ടിപ്പ് വിരുദ്ധ ഉപകരണംSafety strap and hardware for wall mounting.1 സെറ്റ്
ഹാർഡ്‌വെയർ പായ്ക്ക്സ്ക്രൂകൾ, ബോൾട്ടുകൾ, അല്ലെൻ റെഞ്ച് മുതലായവ.1 സെറ്റ്

4. അസംബ്ലി നിർദ്ദേശങ്ങൾ

Follow these steps carefully to assemble your Recaceik Corner Hall Tree. It is recommended to have two people for assembly, though it can be done by one person.

  1. ഘട്ടം 1: അടിസ്ഥാന ഫ്രെയിം കൂട്ടിച്ചേർക്കുക.

    Identify the base metal frame sections. Loosely align all screws with the corresponding pre-drilled holes before fully tightening. This allows for minor adjustments during assembly. Once all screws are in place, tighten them one by one to secure the base.

  2. Step 2: Attach Lower Mesh Shelves.

    Insert the two mesh shoe rack shelves into the designated slots on the lower part of the metal frame. Ensure they are securely seated and align with the frame's structure.

    Close-up of the mesh shoe rack shelves being installed

    Figure 3: Installation of the space-saving mesh shoe rack shelves.

  3. Step 3: Install the Wooden Bench and Top Shelf.

    Place the wooden bench board onto the middle section of the frame, ensuring it aligns with the pre-drilled holes for secure attachment. Similarly, install the top wooden shelf board at the very top of the unit.

  4. Step 4: Attach the Hook Panel and Hooks.

    Secure the wooden panel designed for hooks to the upper metal frame. Once the panel is in place, attach the 6 double hooks using the provided screws. Some hooks may be removable for flexible use.

    Close-up of the anti-tip device and hooks on the hall tree

    Figure 4: Detail of the durable and removable hooks, easy to install for keys, hats, and coats.

  5. Step 5: Install Adjustable Feet.

    Screw the adjustable feet into the bottom of the main frame legs. These feet help stabilize the unit on uneven surfaces and protect your floor.

    Close-up showing adjustable feet for stability

    Figure 5: Adjustable feet ensure the entire rack remains stable on various floor types.

  6. Step 6: Secure with Anti-Tip Device.

    For safety, especially in households with children or pets, attach the anti-tip device to the top of the hall tree and secure it to a wall stud using appropriate wall anchors and screws (not always included, check hardware pack). This prevents the unit from accidentally tipping over.

    Diagram showing the anti-tip device installation

    Figure 6: The anti-tip device is crucial for safety, preventing the shelf from tilting.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Recaceik Corner Hall Tree is designed for convenient organization of your entryway or living space.

6. പരിപാലനം

Proper maintenance will extend the life of your hall tree.

7. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your hall tree, refer to the following common problems and solutions:

പട്ടിക 2: ട്രബിൾഷൂട്ടിംഗ് ഗൈഡ്
പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
യൂണിറ്റ് ഇളകിയിരിക്കുന്നു/സ്ഥിരമല്ല.Screws are loose; uneven floor; adjustable feet not properly set.Ensure all screws are tightened. Adjust the leveling feet at the bottom of the unit to compensate for uneven flooring.
അസംബ്ലി സമയത്ത് ഭാഗങ്ങൾ വിന്യസിക്കില്ല.Screws were tightened too early; incorrect part orientation.Loosen all screws slightly, realign the parts, then tighten screws gradually and evenly. Double-check part labels and orientation according to the instructions.
നഷ്‌ടമായ ഭാഗങ്ങൾ.പാക്കേജിംഗ് പിശക്.Carefully check all packaging materials. If parts are genuinely missing, contact Recaceik customer support with your purchase details.
Hooks are loose.Screws holding hooks are loose.Tighten the screws that secure the hooks to the wooden panel.

8 സ്പെസിഫിക്കേഷനുകൾ

Key specifications for the Recaceik Corner Hall Tree Coat Rack:

Product size diagram showing dimensions of the hall tree

ചിത്രം 7: പ്ലാൻ പ്ലാൻ ചെയ്യുന്നതിനുള്ള വിശദമായ ഉൽപ്പന്ന അളവുകൾ.

9. വാറൻ്റിയും പിന്തുണയും

For any questions, concerns, or assistance with your Recaceik Corner Hall Tree, please contact Recaceik customer support. Refer to your purchase documentation for specific warranty information and contact details.

You can also visit the official Recaceik store for more information and support: Recaceik Store

Documents - Recaceik – Recaceik
[pdf] ഉപയോക്തൃ മാനുവൽ നിർദ്ദേശങ്ങൾ
User Manual Recaceik Dining Table Set 43 3 Rectangle Pub Bistro Kitchen Bar with Backrest Stools 5 Piece Breakfast Metal Frame for Room w 4 Chairs Gold Home B1iMDGbi3 L m media amazon images I |||
BAR TABLE SET ASSEMBLY INSTRUCTIONS 1 Letter number Component Part Design 1 Stool Frame 2 Stool Frame 3 Stool Leg 4 Stool Footrest 5 Stool Cushion 6 Table Leg Table Leg 7 Connection Parts 8 Table Support Frame 2 Quantity X4 X4 X16 X4 X4 X2 X2 X2 Component Letter number ...
സ്കോർ:23 fileവലുപ്പം: 2.45 M പേജ്_എണ്ണം: 18 പ്രമാണ തീയതി: 2023-02-26
[pdf] ഉപയോക്തൃ മാനുവൽ നിർദ്ദേശങ്ങൾ
圆桌带气杆套说明书 Installation Manual Recaceik 23 6 Small Round Dining Table with Printed Marble Top 360° Swivel Tabletop 27 9 35 4 Adjustable Height Pub Bistro Cocktail for Café Home Black Tables C1jwvXZjYbL m media amazon images I |||
ADJUSTABLE ROUND DINING TABLE ASSEMBLY INSTRUCTIONS 1 Letter number Component Part Design A Table Top B Adjustable Base C Gas Spring D Table Base E Screw M6x12mm Allen Wrench F help you tighten the screws Quantity X1 X1 X1 X1 X4 X1 2 ATTENTION 1. When you begin each step, p...
സ്കോർ:20 fileവലുപ്പം: 5.64 M പേജ്_എണ്ണം: 10 പ്രമാണ തീയതി: 2023-07-18