Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Ti HOF Water Block User Manual

1. ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Ti HOF water block. This high-performance water block is designed to provide superior cooling for NVIDIA GeForce RTX 3090 and RTX 3080 Ti HOF series graphics cards, enhancing stability and performance through efficient liquid cooling. Please read this manual thoroughly before proceeding with installation.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Improper installation or handling of liquid cooling components can lead to system damage, including leaks and electrical shorts. Always exercise caution and follow instructions carefully.

• ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് നിങ്ങളുടെ കമ്പ്യൂട്ടർ സിസ്റ്റം പൂർണ്ണമായും ഓഫ് ചെയ്തിട്ടുണ്ടെന്നും വാൾ ഔട്ട്‌ലെറ്റിൽ നിന്ന് അൺപ്ലഗ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
• Discharge any static electricity from your body by touching a grounded metal object before handling components.
• Use only distilled water or approved liquid cooling fluids. Do not use tap water.
• Perform a leak test for at least 24 hours before powering on your system.
• എല്ലാ ഘടകങ്ങളും കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• ഏതെങ്കിലും ഘട്ടത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു ടെക്നീഷ്യനെ സമീപിക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

Please verify that all items are present in your package. If any items are missing or damaged, contact your retailer or Alphacool support immediately.

• Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Ti HOF Water Block
• Integrated Backplate
• മൗണ്ടിംഗ് സ്ക്രൂകളും സ്‌പെയ്‌സറുകളും
• തെർമൽ പാഡുകൾ (പ്രീ-കട്ട് അല്ലെങ്കിൽ ഷീറ്റ്)
• തെർമൽ പേസ്റ്റ്
• RGB Adapter Cable (if applicable)
• ഇൻസ്റ്റലേഷൻ ഗൈഡ് (ഈ പ്രമാണം)

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section outlines the general steps for installing the water block onto your graphics card. Specific steps for disassembling your graphics card may vary by model; refer to your graphics card manufacturer's documentation for detailed disassembly instructions.

4.1 Preparing the Graphics Card

1. Carefully remove the stock cooler from your graphics card. This typically involves unscrewing the mounting screws from the GPU die and removing screws securing the shroud and backplate.
2. Thoroughly clean the GPU die and all memory modules (VRAM) and voltage regulator modules (VRM) of any residual thermal paste or thermal pad material using isopropyl alcohol and a lint-free cloth.

4.2 Applying Thermal Materials

1. Apply a small amount of thermal paste to the center of the GPU die. Spread it evenly to a thin layer using a spatula or by allowing the pressure from the water block to spread it.
2. Cut the provided thermal pads to the correct sizes as indicated in the included diagram (if applicable) or as per the Alphacool installation guide for your specific GPU model.
3. Carefully place the thermal pads onto the VRAM and VRM components. Ensure good contact and coverage. The Alphacool Eisblock design utilizes 1mm thick thermal pads for optimal component contact and cooling performance.

4.3 വാട്ടർ ബ്ലോക്ക് സ്ഥാപിക്കൽ

1. Align the Alphacool Eisblock Aurora water block with the mounting holes on your graphics card.
2. Gently lower the water block onto the graphics card, ensuring the GPU die makes contact with the copper base and thermal pads are correctly seated.
3. Secure the water block using the provided mounting screws. Tighten screws in a diagonal pattern to ensure even pressure, but do not overtighten.
4. Connect the digital RGB cable from the water block to a compatible 3-pin 5V addressable RGB header on your motherboard or a dedicated RGB controller.

ചിത്രം 1: മുകളിൽ view of the Alphacool Eisblock Aurora Acryl GPX-N water block, showcasing the clear acrylic top, internal flow paths, and nickel-plated copper base.

Figure 2: The Alphacool Eisblock Aurora water block illuminated with vibrant digital RGB lighting, highlighting the internal coolant channels and beveled edges.

ചിത്രം 3: പിൻഭാഗം view of the Alphacool Eisblock Aurora water block, showing the integrated black backplate which provides structural support and additional passive cooling.

4.4 Integrating into the Cooling Loop

1. Install appropriate G1/4" fittings (not included) into the inlet and outlet ports of the water block.
2. Connect the water block to your existing or new custom liquid cooling loop using tubing. Ensure all connections are secure and leak-free.
3. Fill your cooling loop with coolant and perform a leak test. It is highly recommended to use an air pressure leak tester before introducing liquid. Once filled, run the pump for at least 24 hours with the system powered off (using a PSU jumper) to check for any leaks. Place paper towels under all connections to easily spot drips.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the water block is successfully installed and the liquid cooling loop has passed a leak test, you can power on your system.

• പ്രാരംഭ ആരംഭം: Monitor coolant levels and temperatures closely during the first few hours of operation.
• RGB നിയന്ത്രണം: The integrated digital RGB lighting can be controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) or a dedicated Alphacool RGB controller. Ensure the 3-pin 5V ARGB header is correctly connected.
• താപനില നിരീക്ഷണം: Use monitoring software to keep track of your GPU temperatures to ensure optimal cooling performance.

6. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your liquid cooling system.

• കൂളന്റ് മാറ്റിസ്ഥാപിക്കൽ: It is recommended to replace the coolant every 6-12 months, depending on the coolant type and system usage.
• സിസ്റ്റം ഫ്ലഷ്: When replacing coolant, consider flushing the entire loop with distilled water or a dedicated cleaning solution to remove any buildup.
• Block Inspection: Periodically inspect the water block for any signs of corrosion, algae growth, or blockages. If necessary, disassemble and clean the block using appropriate cleaning agents for acrylic and copper.
• Fittings Check: Ensure all fittings remain tight and leak-free.

7. പ്രശ്‌നപരിഹാരം

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു.

• മോശം കൂളിംഗ് പ്രകടനം:
  • Ensure proper thermal paste application and thermal pad contact.
  • Check for air bubbles trapped in the water block. Tilt the system gently to dislodge them.
  • Verify pump is operating correctly and coolant flow is adequate.
  • Inspect radiators for dust buildup and clean if necessary.
• ചോർച്ച:
  • സിസ്റ്റം ഉടൻ ഓഫ് ചെയ്യുക.
  • Identify the source of the leak. Tighten fittings or replace O-rings/tubing as needed.
  • Perform another leak test before powering on.
• RGB ലൈറ്റിംഗ് പ്രവർത്തിക്കുന്നില്ല:
  • Check the connection of the 3-pin 5V ARGB cable to the motherboard or controller.
  • നിങ്ങളുടെ മദർബോർഡിന്റെ BIOS/UEFI-യിൽ RGB ഹെഡർ പ്രവർത്തനക്ഷമമാക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • ശരിയായ RGB സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റാൾ ചെയ്‌തിട്ടുണ്ടെന്നും കോൺഫിഗർ ചെയ്‌തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

Alphacool products are manufactured to high quality standards. For warranty information, please refer to the terms and conditions provided with your purchase or visit the official Alphacool webസൈറ്റ്.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Alphacool customer service through their official webസൈറ്റ്:www.alphacool.com