1. ആമുഖം
The Hafele Loox5 LED 2060 Strip Light is a flexible, dimmable 12V LED lighting solution designed for functional and indirect illumination in various indoor applications, such as closet storage spaces and furniture. This manual provides essential information for the safe and proper installation, operation, and maintenance of your LED strip light.
This product features high-quality Samsung LEDs, a narrow 3/16 inch (5 mm) width, and a high Color Rendering Index (CRI) of >90 for vibrant, true color rendering. It is UL certified and can be shortened at designated intervals.
2 സുരക്ഷാ വിവരങ്ങൾ
- ഇലക്ട്രിക്കൽ സുരക്ഷ: Always disconnect power before installation, maintenance, or troubleshooting. Installation should be performed by a qualified professional if you are unsure.
- വാല്യംtage: This LED strip operates on 12V DC. Connecting it to a higher voltage power source will damage the product and void the warranty. A compatible 12V driver (not included) is required.
- ഇൻഡോർ ഉപയോഗത്തിന് മാത്രം: This product has an IP20 rating, meaning it is not water-resistant. Do not expose it to moisture or use it in outdoor or wet environments.
- മുറിക്കൽ: Only cut the LED strip at the designated cut marks (every 1 inch / 25 mm). Cutting elsewhere will damage the circuit and render that section unusable.
- ചൂട്: Ensure adequate ventilation around the LED strip to prevent overheating, which can reduce its lifespan.
- കൈകാര്യം ചെയ്യൽ: Avoid bending the strip sharply or applying excessive force, as this can damage the internal components.
3. പാക്കേജ് ഉള്ളടക്കം
അൺപാക്ക് ചെയ്യുമ്പോൾ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക:
- Hafele Loox5 LED 2060 Strip Light (16.4 ft / 5 m roll)
- Self-adhesive backing
- Lead cable (78 3/4 inches / 2 m)
കുറിപ്പ്: A 12V power driver is required for operation and is sold separately.
4 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ | Loox5 LED 2060 |
| ഇന്റേണൽ മോഡൽ നമ്പർ | 7f249720-1a80-4e0a-9119-f48376e732e9 |
| വാല്യംtage | 12 വോൾട്ട് ഡിസി |
| വാട്ട്tage (per meter) | 4.8 W |
| ആകെ വാട്ട്tage (16.4 ft / 5 m) | 24 വാട്ട്സ് |
| മീറ്ററിന് LED-കൾ | 120 |
| ഇളം നിറം | തണുത്ത വെള്ള |
| വർണ്ണ താപനില | 4000 കെൽവിൻ |
| കളർ റെൻഡറിംഗ് ഇൻഡക്സ് (CRI) | >90 |
| മങ്ങിയത് | അതെ |
| ആയുസ്സ് (L80/B10) | > 50,000 മണിക്കൂർ |
| വീതി | 3/16 ഇഞ്ച് (5 മിമി) |
| നീളം | 16.4 അടി (5 മീറ്റർ) |
| Cuttable Intervals | Every 1 inch (25 mm) |
| IP കോഡ് | IP20 (ഇൻഡോർ ഉപയോഗത്തിന് മാത്രം) |
| മൗണ്ടിംഗ് | സ്വയം പശ |
| സർട്ടിഫിക്കേഷനുകൾ | UL Certified, Title 24 Compliant |
| മെറ്റീരിയൽ | Vinyl, Metal, PCB |
| നിയന്ത്രണ രീതി | App Control (with compatible driver/controller) |
5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Careful planning and execution are crucial for optimal performance and longevity of your LED strip light.
- നിങ്ങളുടെ ലേഔട്ട് ആസൂത്രണം ചെയ്യുക: Determine the exact path for your LED strip. Ensure the surface is clean, dry, and smooth for proper adhesion.
- Measure and Cut (if necessary): The LED strip can be shortened every 1 inch (25 mm) at the designated cut marks. Use sharp scissors to ensure a clean cut. Do not cut in any other location.
ചിത്രം 5.1: Technical diagram illustrating the dimensions of the LED strip and the precise locations where it can be safely cut. The diagram shows a width of 5mm and indicates cutting points every 25mm (1 inch). - Connect to 12V Driver: Connect the 2-meter lead cable from the LED strip to a compatible 12V DC power driver (not included). Ensure polarity is correct (positive to positive, negative to negative).
- Test Before Adhesion: Before removing the adhesive backing, temporarily connect the LED strip to the 12V driver and power it on to ensure it functions correctly.
- സ്ട്രിപ്പ് പാലിക്കുക: Once tested, peel off the protective film from the self-adhesive backing. Carefully press the LED strip onto the desired surface, applying firm, even pressure along its entire length. Avoid repositioning the strip multiple times, as this can weaken the adhesive.
- സുരക്ഷിത കണക്ഷനുകൾ: ഷോർട്ട് സർക്യൂട്ടുകൾ തടയാൻ എല്ലാ വൈദ്യുത കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും ഇൻസുലേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
6. ഓപ്പറേഷൻ
The Hafele Loox5 LED 2060 Strip Light is designed for straightforward operation once properly installed with a compatible 12V driver and controller.
- പവർ ഓൺ/ഓഫ്: Control the power to the LED strip via the connected 12V driver or its associated switch/controller.
- മങ്ങുന്നു: This LED strip is dimmable. If connected to a compatible dimmable 12V driver and controller (e.g., an app-controlled system), you can adjust the brightness level according to your preference.
- ഇളം നിറം: The strip emits a Cool White light at 4000 Kelvin. This color temperature is fixed and cannot be changed.
7. പരിപാലനം
The Hafele Loox5 LED 2060 Strip Light requires minimal maintenance to ensure its long-term performance.
- വൃത്തിയാക്കൽ: Periodically wipe the surface of the LED strip with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the LEDs or the strip's components. Ensure the power is off before cleaning.
- പരിശോധന: Regularly inspect the strip for any signs of damage, loose connections, or adhesive failure. Address any issues promptly to prevent further problems.
- പരിസ്ഥിതി: Maintain a stable indoor environment, avoiding extreme temperatures or high humidity, which can negatively impact the lifespan of the LEDs.
8. പ്രശ്നപരിഹാരം
If you encounter issues with your LED strip light, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| LED സ്ട്രിപ്പ് പ്രകാശിക്കുന്നില്ല. | No power to the driver. Incorrect wiring/polarity. Faulty 12V driver. കേടായ LED സ്ട്രിപ്പ്. | Check power supply to the driver. Verify all connections and polarity. Test the driver with another 12V load if possible. Inspect the strip for visible damage, especially at cut points. |
| Section of the LED strip is not lighting up. | Damage to that section. തെറ്റായ കട്ട്. | Inspect the non-working section for physical damage or a faulty connection point. Ensure cuts were made only at designated marks. |
| LED strip flickers or dims inconsistently. | അയഞ്ഞ കണക്ഷൻ. Incompatible or faulty dimmer/controller. Insufficient power from driver. | എല്ലാ ഇലക്ട്രിക്കൽ കണക്ഷനുകളും പരിശോധിക്കുക. Ensure the dimmer/controller is compatible with 12V LED strips and is functioning correctly. Verify the 12V driver has sufficient wattage for the entire strip length. |
| പശ പിടിക്കുന്നില്ല. | Surface not clean/dry. Surface too porous or textured. Adhesive weakened by repositioning. | Ensure surface is thoroughly cleaned and dried before application. Consider using additional mounting clips or a stronger adhesive if the surface is unsuitable. |
9. പിന്തുണ
For further assistance, technical support, or inquiries regarding your Hafele Loox5 LED 2060 Strip Light, please contact Hafele customer service or visit the official Hafele webസൈറ്റ്.
ഹാഫെലെ Webസൈറ്റ്: www.hafele.com
