സോണി FX30 FX3 ഇൻസ്ട്രക്ഷൻ മാനുവലിനുള്ള സ്മോൾറിഗ് കേജ്

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your SmallRig Cage for Sony FX30 / FX3 (Model 3278-SR). This camera cage is designed to enhance the functionality and protection of your Sony FX30 or FX3 camera, offering multiple mounting points for accessories and improved handling.

Image 1.1: SmallRig Cage (Model 3278-SR) installed on a Sony FX30/FX3 camera, showcasing its form-fitting design and integrated features.

2. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

• കൂട് x 1
• HDMI കേബിൾ Clamp x 1
• 1/4"-20 Screw x 2
• NATO Rail x 1
• Magnetic Wrench x 1 (integrated into the cage)

ചിത്രം 2.1: എക്സ്പ്ലോഡഡ് view of the SmallRig Cage components, showing the main cage body, removable NATO rail, HDMI cable clamp, mounting screws, and the integrated magnetic wrench.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to properly install the SmallRig Cage on your Sony FX30 or FX3 camera.

3.1 Attaching the U-shaped Cage Module

1. Align the U-shaped cage module with your Sony FX30 or FX3 camera.
2. Secure the cage to the camera using the 1/4"-20 screws on both sides and the bottom. This multi-point attachment prevents twisting and ensures a stable fit. A magnetic wrench is integrated into the cage for convenient assembly.

Image 3.1: Illustration of the anti-twist design, highlighting the three screw attachment points (left, right, and bottom) for secure camera mounting.

3.2 Installing the NATO Rail Module

1. Position the NATO rail module on the top of the cage.
2. Secure it using the two 1/4"-20 screws provided.
3. കുറിപ്പ്: If you intend to use the original Sony XLR top handle, the NATO rail module must be disassembled first.

Image 3.2: Modular design components, including the removable NATO rail and HDMI cable clamp, ഇൻസ്റ്റാളേഷന് തയ്യാറാണ്.

ചിത്രം 3.3: ഉദാample setup demonstrating compatibility with the original XLR handle, noting the requirement to remove the top NATO rail.

3.3 Attaching the HDMI Cable Clamp

1. Locate the dedicated HDMI cable clamp.
2. cl അറ്റാച്ചുചെയ്യുകamp to the side of the cage, aligning it with the camera's HDMI port.
3. Insert your HDMI cable and tighten the clamp to secure it, preventing accidental disconnections and protecting the port.

ചിത്രം 3.4: വിശദമായത് view of the cage features, including the HDMI cable clamp for secure signal transmission, the hinge arm for battery access, and precise cutouts for power cables.

4. Operating the Cage and Accessories

The SmallRig Cage provides numerous options for expanding your camera rig.

4.1 Utilizing Multiple Mounting Points

The cage features various mounting points for attaching accessories:

• 1/4"-20 ത്രെഡ് ചെയ്ത ദ്വാരങ്ങൾ: Located throughout the cage, these are suitable for attaching accessories like the SmallRig Magic Arm 3873 or quick release plates.
• ARRI ലൊക്കേറ്റിംഗ് ഹോളുകൾ: These 3/8"-16 holes with anti-twist pins are designed for accessories such as the SmallRig Top Handle 3765.
• നാറ്റോ റെയിൽ: The side NATO rail allows for quick attachment and detachment of accessories like the SmallRig Side Handle 3813.
• തണുത്ത ഷൂ മൗണ്ട്: An integrated cold shoe mount is available for microphones (e.g., SmallRig Microphone 3468) or LED video lights (e.g., SmallRig LED Video Light 3286B).
• Strap Holes: Located on both sides and the bottom, compatible with hand straps (e.g., SmallRig Hand Strap 3848) or shoulder straps (e.g., SmallRig Shoulder Strap PSC2428).
• QD Socket: A Quick Detach (QD) socket on the bottom allows for quick attachment of QD shoulder straps.

ചിത്രം 4.1: കഴിഞ്ഞുview of the multiple mounting points available on the cage, detailing their types and locations for accessory attachment.

4.2 Quick Release Plate Compatibility

The bottom of the cage features a quick release plate compatible with Arca-Swiss standards. This allows for quick mounting onto:

• DJI RS 2, RSC 2, RS 3, RS 3 Pro gimbals.
• Arca-Swiss compatible tripods (e.g., SmallRig Arca Quick Release Plate 3154).

Image 4.2: Close-up of the Arca-Swiss compatible quick release plate at the base of the cage, facilitating rapid transitions between stabilizers and tripods.

4.3 Battery Access and Grip

The battery compartment features a hinge arm design, allowing full access to the battery without removing the cage. This design also improves the grip experience for the user.

5. പരിപാലനം

• വൃത്തിയാക്കൽ: Wipe the cage with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or solvents.
• പരിശോധന: Periodically check all screws and connections to ensure they are tight. Use the integrated magnetic wrench for tightening as needed.
• സംഭരണം: ഉപയോഗത്തിലില്ലാത്തപ്പോൾ, വരണ്ടതും വൃത്തിയുള്ളതുമായ അന്തരീക്ഷത്തിൽ കൂട് സൂക്ഷിക്കുക.

6. പ്രശ്‌നപരിഹാരം

• ഇഷ്യൂ: Accessories do not fit the top NATO rail.

  പരിഹാരം: The spacing between the 1/4"-20 holes on the top NATO rail is 27mm. Ensure your accessories are compatible with this spacing. Accessories designed for 18mm spacing will not fit.

  

  Image 6.1: Illustration highlighting the 27mm hole spacing on the NATO rail and demonstrating incompatibility with accessories requiring 18mm spacing.
• ഇഷ്യൂ: Original Sony XLR handle cannot be attached.

  പരിഹാരം: The top NATO rail module must be removed before attaching the original Sony XLR handle.

• ഇഷ്യൂ: Cage feels loose or twists on the camera.

  പരിഹാരം: Ensure all three 1/4"-20 screws (two on the sides, one on the bottom) are securely tightened using the integrated magnetic wrench.

7 സ്പെസിഫിക്കേഷനുകൾ

Image 7.1: Dimensional drawing of the SmallRig Cage, showing key measurements for width, height, and depth.

8. വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾക്കും സാങ്കേതിക പിന്തുണയ്ക്കും, ദയവായി ഔദ്യോഗിക SmallRig കാണുക. webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

നിർമ്മാതാവ്: സ്മാൾറിഗ്

Webസൈറ്റ്: www.smallrig.com