ആമുഖം
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Marantec Comfort 260 Accu Garage Door Opener. Please read this manual thoroughly before beginning installation or operation to ensure safe and efficient use of the product. Keep this manual for future reference.
Figure 1: Main unit of the Marantec Comfort 260 Accu Garage Door Opener.
സുരക്ഷാ വിവരങ്ങൾ
Your safety is paramount. Observe all safety warnings and instructions provided in this manual and on the product itself. Failure to do so may result in serious injury or property damage.
- പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: Due to standard DIN EN 12453, adjustments to force and speed settings should only be performed by trained personnel, such as a specialized dealer.
- വൈദ്യുതി വിച്ഛേദിക്കൽ: Always disconnect power to the unit before performing any maintenance or adjustments.
- തടസ്സം കണ്ടെത്തൽ: Ensure the safety reversal system is functioning correctly. The door must reverse if it encounters an obstruction.
- കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Keep children and pets away from the garage door area, especially when the door is in motion. Do not allow children to operate the opener.
- അടിയന്തര റിലീസ്: Familiarize yourself with the emergency release mechanism for manual operation during power outages.
- സുരക്ഷിത പ്രവർത്തനം: The system features 128-bit encryption for secure radio communication, preventing unauthorized access.
പാക്കേജ് ഉള്ളടക്കം
താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:
- Garage door opener motor unit with integrated control (pre-wired)
- Accu 700 battery unit with charge controller
- Charger with European plug (Type C)
- Digital 921 module receiver, 868 MHz bi.linked
- Digital 572 micro handheld transmitter, 2-channel, 868 MHz bi.linked
- Connection material for swing and sectional gates
- മൌണ്ടിംഗ് ഹാർഡ്വെയർ
- മുന്നറിയിപ്പ് സ്റ്റിക്കർ
Important: A drive rail is required for complete installation and must be ordered separately.
Figure 2: Included components of the Marantec Comfort 260 Accu system.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Installation should be performed by a qualified individual following all local building codes and electrical regulations. Ensure the garage door is in good working order and properly balanced before installation.
1. Prepare the Garage Door
Ensure your garage door operates smoothly manually. Lubricate moving parts if necessary. The door must be balanced so it stays open at any point of travel when released.
2. Install the Drive Rail (Sold Separately)
Attach the drive rail according to its specific instructions. This rail will guide the garage door opener's trolley.
3. Mount the Motor Unit
Mount the motor unit to the ceiling or wall at the appropriate height, ensuring it is securely fastened and aligned with the drive rail. Refer to the detailed diagrams in the separate installation guide for precise measurements and mounting points.
Figure 3: Marantec Comfort 260 Accu installed in a garage.
4. Connect the Battery Unit
Connect the Accu 700 battery unit to the motor. Ensure the connection is secure. The battery unit provides power to the motor, making it independent of a direct electrical outlet.
5. Program the Remote Control
The Digital 572 micro handheld transmitter needs to be programmed to communicate with the opener. Follow the specific programming instructions provided with the transmitter. This typically involves pressing a learn button on the motor unit and then a button on the remote.
Figure 4: Operating the garage door with the handheld remote from inside a vehicle.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Marantec Comfort 260 Accu is designed for simple and reliable operation.
Using the Handheld Transmitter
- Ensure the path of the garage door is clear of any obstructions.
- Press the desired function button on your Digital 572 micro handheld transmitter.
- The garage door will begin to open or close. Pressing the button again during operation will stop the door.
- The transmitter features two freely configurable function buttons for versatile control.
Using the Interior Push-Button
If an interior push-button is installed, simply press it to open or close the garage door. Pressing it again will stop the door.
LED സിഗ്നലിംഗ്
The red LED signaling on the unit provides operational status feedback. Refer to the full installation manual for specific LED codes and their meanings.
Figure 5: The integrated LED lighting module.
മെയിൻ്റനൻസ്
പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ഗാരേജ് ഡോർ ഓപ്പണറിന്റെ ദീർഘായുസ്സും സുരക്ഷിതമായ പ്രവർത്തനവും ഉറപ്പാക്കുന്നു.
ബാറ്ററി ചാർജിംഗ്
The Accu 700 battery unit features a continuous charge indicator. When the indicator signals that charging is required, detach the battery unit and recharge it using the provided charger via a conventional household power outlet. A full charge typically lasts several weeks depending on usage.
- Solar Charging (Optional): A modern solar panel can be connected to the battery unit for autonomous charging using sunlight.
ജനറൽ കെയർ
- Keep the motor unit and remote controls clean and free from dust and debris.
- Periodically inspect the garage door and its components (springs, cables, rollers, hinges) for wear and tear. Lubricate moving parts as recommended by your garage door manufacturer.
- Test the safety reversal system monthly. Place a 2x4 board flat on the floor in the door's path. The door should reverse when it contacts the board. If it does not, discontinue use and contact a qualified technician.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter. For more complex problems, contact Marantec customer support or a qualified technician.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഓപ്പണർ റിമോട്ട് കൺട്രോളിനോട് പ്രതികരിക്കുന്നില്ല. |
|
|
| Garage door does not open/close completely. |
|
|
| Battery unit does not hold charge or drains quickly. |
|
|
സ്പെസിഫിക്കേഷനുകൾ
Technical specifications for the Marantec Comfort 260 Accu Garage Door Opener:
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | Accu Comfort 260 |
| നിർമ്മാതാവ് | മാരാന്ടെക് |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 36 x 19 x 12.5 സെ.മീ |
| ഭാരം | 3 കിലോഗ്രാം |
| Max. Pull and Push Force | 550 എൻ |
| പരമാവധി. പ്രവർത്തന വേഗത | 16 സെ.മീ/സെ |
| ഓപ്പറേറ്റിംഗ് വോളിയംtage | 24 V DC |
| ബാറ്ററി തരം (റിമോട്ട്) | 1 CR2032 (ഉൾപ്പെടുത്തിയിരിക്കുന്നു) |
| Battery Composition (Main) | Lithium-manganese dioxide |
| റേഡിയോ ആവൃത്തി | 868 MHz bi.linked |
| എൻക്രിപ്ഷൻ | 128-ബിറ്റ് |
| പരമാവധി. വാതിൽ ഭാരം | 90 കി.ഗ്രാം |
| Suitable Door Types | Up-and-over doors (up to 3.5m wide), single-skin sectional doors (up to 5.0m), double-skin sectional doors (up to 3.0m) |
| മാതൃരാജ്യം | Germany (except batteries) |
വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please contact Marantec directly or refer to the official Marantec webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
Spare parts availability information is not provided in this manual. Please inquire with Marantec or your authorized dealer for spare parts.
Contact information for Marantec can typically be found on their official webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗിൽ.
