ISLANDSAFE Digital Small Personal Safe

ആമുഖം

This manual provides essential instructions for the proper setup, operation, and maintenance of your ISLANDSAFE Digital Small Personal Safe, Model QT. Please read this manual thoroughly before using the safe to ensure correct functionality and security.

സുരക്ഷാ വിവരങ്ങൾ

• Keep emergency keys in a secure location away from the safe and out of reach of children. Do not store them inside the safe.
• Ensure the safe is placed on a stable, level surface or securely mounted to a wall or cabinet.
• Do not attempt to force the safe open if the electronic lock malfunctions. Use the emergency override methods.
• ബാറ്ററി ചാർജ് കുറയുന്നത് ഒഴിവാക്കാൻ, കുറഞ്ഞ ബാറ്ററി സൂചകം പ്രത്യക്ഷപ്പെടുമ്പോൾ ഉടൻ തന്നെ ബാറ്ററികൾ മാറ്റിസ്ഥാപിക്കുക.
• This safe is water-resistant, not waterproof. Avoid exposing it to excessive moisture or direct water contact.

പാക്കേജ് ഉള്ളടക്കം

• ISLANDSAFE Digital Personal Safe (Model QT)
• Emergency Override Keys (2)
• എമർജൻസി ബാറ്ററി ബോക്സ്
• Removable Shelf (1)
• Mounting Hardware (Expansion Screws)
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ഉൽപ്പന്നം കഴിഞ്ഞുview

The ISLANDSAFE Digital Personal Safe is designed to secure your valuables with an electronic combination lock and robust construction. It features a matte finish alloy steel body, dual solid steel bolts, and a pry-resistant door for enhanced security. The interior includes a soft lining and a removable shelf for organized storage.

Image: The ISLANDSAFE Digital Safe with its door open, revealing a spacious interior with a removable shelf, storing various items such as a camera, lens, and small containers.

ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the safe's door mechanism, illustrating the 5mm thick pry-resistant door and dual solid steel locking bolts for maximum security.

ചിത്രം: ക്ലോസ്-അപ്പ് viewഷോasing the safe's design elements: streamlined curved edges, soft interior lining, a built-in LED light for visibility, and protective floor pads.

സജ്ജമാക്കുക

1. ബാറ്ററികൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നു

1. സുരക്ഷിത വാതിലിന്റെ ഉള്ളിൽ ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക.
2. Insert 4 AA Alkaline batteries (not included) according to the polarity markings.
3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ അടയ്ക്കുക.

2. Initial Passcode Setting

The safe comes with a factory default passcode (usually 1-2-3-4 or 0-0-0-0). It is crucial to change this immediately.

1. With the safe door open, press the red reset button located on the inside of the door near the hinge. You will hear a beep.
2. On the keypad, enter your desired 3-8 digit passcode.
3. Press the '#' button to confirm. The safe will beep, indicating the new passcode is set.
4. Test the new passcode with the door open before closing it.

3. സേഫ് മൌണ്ട് ചെയ്യുന്നു

The safe has pre-drilled mounting holes on the back for secure installation.

1. Choose a suitable location on a wall or inside a cabinet.
2. Mark the drilling points through the pre-drilled holes on the safe's back.
3. Drill pilot holes in the marked locations.
4. Align the safe with the drilled holes and secure it using the provided expansion screws.

സേഫ് പ്രവർത്തിപ്പിക്കൽ

Image: Visual guide to the three secure access modes: Keypad Entry, Override Key, and Emergency Power, with step-by-step instructions for each.

1. കീപാഡ് എൻട്രി

1. Enter your personal passcode (3-8 digits).
2. Press the '#' button. The green light will illuminate.
3. Within 5 seconds, turn the knob clockwise to open the safe door.

2. Override Key Access

Use this method if you forget your passcode or if the batteries are completely drained.

1. Remove the small cover plate on the keypad to reveal the keyhole.
2. Insert one of the emergency override keys and turn it counter-clockwise.
3. While holding the key in the turned position, turn the main knob clockwise to open the safe door.
4. Remove the key once the door is open.

3. Emergency Power Box Usage

This method is for when batteries are dead and emergency keys are not immediately available, or if the keypad is unresponsive due to low power.

1. Connect the emergency battery box to the external power port on the keypad.
2. Enter your passcode on the keypad.
3. Press the '#' button. The green light will illuminate.
4. Within 5 seconds, turn the knob clockwise to open the safe door.

4. Changing the Passcode

Follow these steps to change your passcode at any time:

1. Open the safe door using your current passcode or emergency key.
2. വാതിലിന്റെ ഉള്ളിലുള്ള ചുവന്ന റീസെറ്റ് ബട്ടൺ അമർത്തുക. നിങ്ങൾ ഒരു ബീപ്പ് കേൾക്കും.
3. Enter your new 3-8 digit passcode on the keypad.
4. Press the '#' button to confirm. A beep will indicate successful programming.
5. Verify the new passcode with the door open before closing it.

5. അലാറം സിസ്റ്റം

The ISLANDSAFE Digital Personal Safe is equipped with a dual alarm system to deter unauthorized access.

• Failed Entry Alarm: If an incorrect passcode is entered 3 consecutive times, the safe will activate a 60-second audible alarm.
• Vibration/Attack Alarm: If the safe experiences violent shaking or an attempted attack, a vibration sensor will trigger a 60-second audible alarm.

Image: An illustration detailing the dual alarm system, showing triggers for failed entry and violent impact, leading to a 60-second audible alert.

മെയിൻ്റനൻസ്

1. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the low battery indicator light illuminates on the keypad, it is time to replace the batteries. Use 4 new AA Alkaline batteries. Refer to the "Installing Batteries" section under Setup for detailed steps.

2. വൃത്തിയാക്കൽ

To clean the exterior of your safe, use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish. For the interior, a dry cloth is sufficient. Ensure no moisture enters the electronic components.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

Image: A detailed diagram illustrating the exterior and interior dimensions of the safe, along with other key specifications.

വാറൻ്റിയും പിന്തുണയും

ISLANDSAFE is committed to providing quality products and customer satisfaction. For any questions, concerns, or technical assistance regarding your safe, please utilize our 24-hour online customer service. Contact information can typically be found on the product packaging or the official ISLANDSAFE webസൈറ്റ്.