1. ആമുഖം
The Dasqua 7123-1004 Magnetic Base is a precision tool designed for securely holding dial indicators and other measuring instruments. It features a strong magnetic force, a V-grooved base for versatile mounting, chrome-plated rods, and a fine adjustment mechanism for precise positioning. Its robust construction ensures reliability and accuracy in various industrial and scientific applications.
This image highlights the solid structure with electroplated surfaces and ground end-faces, contributing to the magnetic base's durability and precision.
2. ഉൽപ്പന്ന ഘടകങ്ങൾ
Familiarize yourself with the main components of your Dasqua Magnetic Base:
This diagram labels the key parts:
- കാന്തിക അടിത്തറ: The primary unit containing the permanent magnet and ON/OFF switch.
- Main Pole: The vertical rod extending from the base.
- Sub Pole: The horizontal rod, adjustable for reach.
- Lower Fixture: Secures the main pole to the base.
- Upper Fixture: Connects the main pole to the sub pole.
- മികച്ച ക്രമീകരണം: A mechanism for precise, small movements of the indicator.
- സൂചകം Clamping Screw: Used to secure a dial indicator or other measuring device.
The image above shows the complete Dasqua 7123-1004 Magnetic Base with its adjustable arm and fine adjustment mechanism, as it appears out of the box.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the magnetic base and its components from the packaging. Inspect for any damage.
- അടിസ്ഥാന സ്ഥാനം:
Ensure the surface where the magnetic base will be placed is clean, flat, and ferrous (magnetic). The base features a V-groove for secure mounting on cylindrical parts.
Figure 3.1: V-Grooved Base for Cylindrical Parts This image highlights the V-grooved design on the bottom of the magnetic base, which facilitates stable attachment to round workpieces or surfaces.
- Activating the Magnet: Turn the ON/OFF switch on the magnetic base to the "ON" position. This will activate the powerful permanent magnet, securing the base to the ferrous surface.
- Assembling the Arm: If the arm components (main pole, sub pole, fixtures) are not pre-assembled, connect them as shown in the component diagram (Figure 2.1). Ensure all clamping screws are finger-tight to allow for adjustment.
- ഇൻഡിക്കേറ്റർ മൌണ്ട് ചെയ്യുന്നു: Insert your dial indicator or measuring device into the clamping hole at the end of the sub pole. The clamping holes are designed to accommodate 6mm, 8mm, and 3/8 inch diameter shanks. Tighten the indicator clamping screw to secure the indicator.
This image illustrates the various clamping hole diameters (4mm, 8mm, and 3/8 inch) available on the magnetic base's arm for attaching different indicators.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- അടിസ്ഥാനത്തിന്റെ സ്ഥാനം: With the magnet in the "OFF" position, place the base on the desired ferrous surface. Once positioned, turn the switch to "ON" to secure it. The base provides 132 lbs (60 kg) of holding force.
- കൈ ക്രമീകരിക്കൽ: cl അഴിക്കുകamping screws on the upper and lower fixtures to adjust the main and sub poles to the desired height and angle. The chrome-plated rods allow for smooth movement. Once the approximate position is achieved, tighten the clamping screws firmly.
- Using Fine Adjustment: For precise positioning of the indicator, use the fine adjustment knob. This mechanism allows for minute movements of the indicator without needing to loosen and readjust the main arm clamps.
- Disengaging the Magnet: When finished, turn the ON/OFF switch on the magnetic base to the "OFF" position to release the base from the surface.
This image shows the magnetic base and indicates its strong holding power of 132 lbs (60 kg) when the magnet is activated.
This series of diagrams illustrates how the fine adjustment knob operates, enabling precise, small movements of the indicator arm for accurate measurement setup.
5. പരിപാലനം
- വൃത്തിയാക്കൽ: Keep the magnetic base and its components clean and free from dust, debris, and metal shavings. Use a soft, dry cloth. For stubborn grime, a mild cleaner can be used, ensuring no liquid enters the internal mechanism.
- സംഭരണം: Store the magnetic base in a dry, clean environment when not in use. Ensure the magnet is in the "OFF" position during storage to prevent accidental attachment to other tools or surfaces.
- പരിശോധന: Periodically inspect the rods for any signs of damage or corrosion. The chrome-plated rods are designed for durability, but proper care extends their lifespan.
- ലൂബ്രിക്കേഷൻ: No specific lubrication is typically required for the magnetic base mechanism or rods. Avoid applying oils or greases that could attract metal particles.
6. പ്രശ്നപരിഹാരം
- Base Not Holding Firmly:
- ഓൺ/ഓഫ് സ്വിച്ച് പൂർണ്ണമായും "ഓൺ" സ്ഥാനത്താണെന്ന് ഉറപ്പാക്കുക.
- Verify the mounting surface is ferrous (magnetic) and clean. Rust, paint, or debris can reduce magnetic force.
- Check for any gaps between the base and the mounting surface.
- Arm Movement is Stiff:
- cl അഴിക്കുകamping screws on the fixtures.
- Clean the rods and inside the clamping mechanisms to remove any accumulated debris.
- Indicator Not Holding Securely:
- Ensure the indicator's shank diameter matches one of the clamping hole sizes (6mm, 8mm, or 3/8 inch).
- Tighten the indicator clampഇൻ സ്ക്രൂ ദൃഡമായി.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | 7123-1004 |
| ഹോൾഡിംഗ് ഫോഴ്സ് | 132 പൗണ്ട് (60 കി.ഗ്രാം) |
| അടിസ്ഥാന അളവുകൾ (L x W x H) | 60 മിമി (2.36") x 50 മിമി (1.97") x 55 മിമി (2.17") |
| Main Rod Diameter x Length | 12mm (0.47") x 176mm (6.93") |
| Second Rod Diameter x Length | 10mm (0.39") x 150mm (5.91") |
| Clamp ദ്വാര വ്യാസം | 6mm (0.24"), 8mm (0.31"), 3/8" |
| ഉൽപ്പന്ന അളവുകൾ (മൊത്തം) | 11 x 4 x 3 ഇഞ്ച്; 4 പൗണ്ട് |
| നിർമ്മാതാവ് | HHIP |
8. വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the documentation included with your product or contact Dasqua customer service directly. You may also visit the official Dasqua webകൂടുതൽ സഹായത്തിനുള്ള സൈറ്റ്.
നിർമ്മാതാവ്: HHIP
ബ്രാൻഡ്: ദസ്ക്വാ
മോഡൽ: 7123-1004
