ആമുഖം
Thank you for choosing the Polibi L-Shaped Metal Corner Bunk Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The Polibi L-Shaped Metal Corner Bunk Bed, showcasing its twin-over-full configuration with an integrated loft bed and desk, designed for space efficiency.
സുരക്ഷാ വിവരങ്ങൾ
നിങ്ങളുടെ സുരക്ഷയാണ് പരമപ്രധാനം. ഇനിപ്പറയുന്ന സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ പാലിക്കുക:
- പരമാവധി ഭാരം ശേഷി: Ensure that the weight limits for each bed are strictly observed to prevent structural failure. Consult the specifications section for detailed weight capacities.
- Pinch Points and Sharp Edges: Exercise caution during assembly and use to avoid potential pinch points or sharp edges. Inspect the bed regularly for any damage or wear that could create hazards.
- ശരിയായ അസംബ്ലി: Follow all assembly instructions precisely. Incorrect assembly can lead to instability or collapse, posing a serious risk of injury. Do not modify the bed structure.
- ഗാർഡ്റെയിലുകൾ: The top bunk and loft bed are equipped with full-length guardrails for safety. Ensure they are always securely in place.
- ഗോവണി ഉപയോഗം: Always use the provided ladders for accessing the upper bunks and loft bed. Do not jump on or off the beds.
- മെത്തയുടെ വലിപ്പം: Use only mattresses of the specified size to ensure proper fit and safety. The side rails are designed for standard mattresses without excessive pillow tops.
- വെൻ്റിലേഷൻ: Ensure adequate ventilation around the bed, especially if placed in a corner, to prevent moisture buildup.
- Children's Use: This bed is intended for kids and teens. Supervise younger children to ensure safe use.
സജ്ജീകരണവും അസംബ്ലിയും
The Polibi L-Shaped Metal Bunk Bed is designed for straightforward assembly. All necessary parts, tools, and instructions are included in one efficiently packed box. Assembly typically takes less than an hour with assistance.
- അൺപാക്ക് ചെയ്ത് പരിശോധിക്കുക: Carefully unpack all components and compare them against the parts list provided in the assembly guide. Ensure all hardware is present.
- പ്രദേശം തയ്യാറാക്കുക: Choose a clear, flat area for assembly. It is recommended to assemble the bed in the room where it will be used.
- നിർദ്ദേശങ്ങൾ പാലിക്കുക: Refer to the detailed step-by-step assembly instructions provided in the separate assembly manual. Pay close attention to diagrams and fastener labels.
- സുരക്ഷിത കണക്ഷനുകൾ: Ensure all bolts and nuts are tightened securely. Periodically check and re-tighten connections as needed.
- സ്ലാറ്റ് ഇൻസ്റ്റാളേഷൻ: Install the secured metal slats as per the instructions. No box spring or foundation is required for this bed.
Image: Detailed dimensions of the Polibi L-Shaped Metal Bunk Bed, crucial for planning placement and assembly. Note the overall length of 117.3 inches and height of 67 inches.
ചിത്രം: ക്ലോസ്-അപ്പ് view of the integrated desk area on the Polibi L-Shaped Metal Bunk Bed, showing its sturdy construction and ample വർക്ക്സ്പെയ്സ്.
പ്രവർത്തനവും ഉപയോഗവും
The Polibi L-Shaped Metal Bunk Bed offers a versatile and space-saving sleeping solution for multiple individuals.
- Triple Sleeping Capacity: This L-shaped configuration includes a Twin over Full bunk bed and an attached Twin loft bed, providing sleeping space for up to three individuals.
- ഇന്റഗ്രേറ്റഡ് ഡെസ്ക്: The loft bed features an integrated desk, ideal for study, work, or creative activities, maximizing room utility.
- ഗോവണി: Two integrated ladders provide safe and convenient access to the upper twin bunk and the twin loft bed.
- സ്പേസ് സേവിംഗ് ഡിസൈൻ: The L-shape design is optimized for corner placement, making it an excellent solution for smaller rooms or accommodating multiple occupants.
ചിത്രം: ഒരു ഓവർഹെഡ് view of the Polibi L-Shaped Metal Bunk Bed, illustrating its compact and efficient design for maximizing floor space.
മെയിൻ്റനൻസ്
Regular maintenance will ensure the longevity and safety of your Polibi bunk bed.
- വൃത്തിയാക്കൽ: മെറ്റൽ ഫ്രെയിമിന്, മൃദുവായ, ഡി തുണി ഉപയോഗിച്ച് തുടയ്ക്കുക.amp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. For any fabric components (e.g., mattress covers, if applicable), follow their specific care instructions. The manufacturer specifies "Dry Clean Only" for general product care, which typically refers to textiles. For the metal frame, a simple wipe-down is sufficient.
- ഹാർഡ്വെയർ പരിശോധന: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten any loose hardware to maintain stability.
- ഘടനാപരമായ സമഗ്രത: Regularly check the bed frame for any signs of bending, cracks, or damage. If any structural issues are observed, discontinue use immediately and contact customer support.
- സ്ലാറ്റ് അവസ്ഥ: Ensure all metal slats are in place and undamaged. Damaged or missing slats can compromise mattress support and safety.
ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the metal slats supporting the mattress, highlighting the robust construction that eliminates the need for a box spring.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with your bunk bed.
- നഷ്ടപ്പെട്ടതോ കേടായതോ ആയ ഭാഗങ്ങൾ: If you find any parts missing or damaged upon delivery, do not proceed with assembly. Contact Polibi customer support immediately for replacement parts.
- Assembly Difficulties (Holes Not Aligning): Ensure you are following the assembly instructions precisely. Often, perceived misalignment is due to parts being oriented incorrectly. Double-check each step and the orientation of components before tightening fasteners. Loosen previously tightened bolts slightly to allow for adjustment if needed, then re-tighten once aligned.
- Bed Instability/Wobbling: This is typically caused by loose hardware. Re-check and tighten all bolts and connections throughout the entire frame. Ensure the bed is placed on a level surface.
- Scratches on Frame: Minor cosmetic scratches may occur during shipping or assembly. These can often be touched up with a black marker or appropriate metal paint. For significant damage, contact customer support.
- ഞരക്കമുള്ള ശബ്ദങ്ങൾ: Squeaking can result from loose connections or metal-on-metal friction. Identify the source of the noise and tighten the corresponding hardware. Applying a small amount of silicone spray to contact points (avoiding areas that support weight directly) can sometimes help.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | SM000606AAB |
| ഉൽപ്പന്ന അളവുകൾ | 117"L x 77.9"W x 57.7"H |
| നിറം | കറുപ്പ് |
| ഫിനിഷ് തരം | തിളങ്ങുന്ന |
| മെറ്റീരിയൽ | ലോഹം |
| അനുയോജ്യമായ മെത്ത വലുപ്പം | Twin, Full |
| അസംബ്ലി ആവശ്യമാണ് | അതെ |
| ഇനത്തിൻ്റെ ഭാരം | 142 പൗണ്ട് |
| ടാർഗെറ്റ് പ്രേക്ഷകർ | കുട്ടികളും കൗമാരക്കാരും |
| പ്രത്യേക ഫീച്ചർ | ബോക്സ് സ്പ്രിംഗ് ആവശ്യമില്ല |
| ഗ്രൗണ്ട് ടു ഇന ദൂരം | 11.8 ഇഞ്ച് |
| നിർമ്മാതാവ് | പോളിബി |
| മാതൃരാജ്യം | വിയറ്റ്നാം |
വാറൻ്റിയും പിന്തുണയും
For specific warranty information regarding your Polibi L-Shaped Metal Bunk Bed, please refer to the documentation included with your purchase or contact Polibi directly. Warranty terms and conditions may vary.
If you require assistance with assembly, have questions about product features, or need to report a defect, please contact Polibi customer support. Contact details can typically be found on the manufacturer's webസൈറ്റ് അല്ലെങ്കിൽ പാക്കേജിംഗ് മെറ്റീരിയലുകളിൽ.
You can visit the official Polibi store for more information: പോളിബി സ്ടോര്
