HOBOT Hobot2s

HOBOT-2S Window Cleaning Automatic Robot User Manual

Model: Hobot2s | Brand: HOBOT

1. ആമുഖം

The HOBOT-2S is an advanced automatic window cleaning robot designed to provide effortless and efficient cleaning for various glass surfaces. It features innovative ultrasonic water spray technology, AI smart route planning, and dual replaceable water tanks, ensuring thorough cleaning without leaving water stains. This manual provides detailed instructions for the safe and effective use of your HOBOT-2S.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read all safety instructions carefully before operating the HOBOT-2S to prevent injury or damage to the device.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the main components of your HOBOT-2S robot.

4.1 HOBOT-2S Front View

HOBOT-2S Window Cleaning Robot front view with power cord connected

മുൻഭാഗം view of the HOBOT-2S, showing the power connection port, start/pause button, and the HOBOT logo.

4.2 HOBOT-2S Bottom View

HOBOT-2S Window Cleaning Robot bottom view with cleaning pads

അടിഭാഗം view of the HOBOT-2S, highlighting the two large cleaning pads and the central suction area.

4.3 Replaceable Water Tank/Nozzle

Diagram showing how to replace the water tank and nozzle on the HOBOT-2S

An illustration demonstrating the process of replacing the water tank or spraying nozzle, which can be done with a standard screwdriver.

5. സജ്ജീകരണം

5.1 ക്ലീനിംഗ് വസ്ത്രങ്ങൾ ഘടിപ്പിക്കൽ

Attach clean microfiber cleaning cloths to the bottom of the robot. Ensure they are securely fastened and cover the entire cleaning pad area.

5.2 Filling Water Tanks

Open the water tank caps and fill with distilled water or HOBOT-approved cleaning solution. Close the caps securely to prevent leakage.

5.3 Connecting Safety Rope

Securely tie the safety rope to a sturdy object indoors, such as a heavy piece of furniture or a window frame anchor. This is a critical safety measure.

5.4 പവർ കണക്ഷൻ

Connect the power adapter to the robot and then plug it into a power outlet. The robot requires continuous power during operation.

Diagram illustrating the long power cord connection for HOBOT-2S

The HOBOT-2S comes with a 5-meter long power cord, including an extension, allowing it to reach large areas.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 പ്രാരംഭ പ്ലേസ്‌മെന്റ്

Place the HOBOT-2S firmly on the glass surface. Ensure the robot has full suction before releasing അത്.

User placing the HOBOT-2S window cleaning robot onto a window

A user carefully placing the HOBOT-2S onto a window surface, ensuring proper suction.

6.2 Starting Cleaning

Press the start button on the robot, use the remote control, or initiate cleaning via the smartphone app. The robot will begin its cleaning cycle.

6.3 ക്ലീനിംഗ് മോഡുകൾ

The HOBOT-2S offers 3 programs for automatic cleaning of surfaces. These programs typically involve zigzag patterns in horizontal and vertical directions to ensure comprehensive coverage.

6.4 Ultrasonic Water Spray

The robot features an ultrasonic water spray system that nebulizes water into a fine mist (15µm particles) for effective cleaning without leaving streaks. This function can be controlled manually or automatically.

HOBOT-2S robot spraying fine mist onto a window surface

The HOBOT-2S actively spraying a fine mist from its ultrasonic nozzles during a cleaning cycle.

Diagram illustrating the dual ultrasonic spray technology of HOBOT-2S

Visual representation of the dual ultrasonic spray technology, showing 15µm fine mist particles for efficient cleaning.

6.5 AI Smart Route Planning

The robot utilizes AI technology for smart route planning, navigating in a zigzag pattern to ensure thorough coverage of the cleaning area. It also features auto-edge detection for frameless windows.

Diagram showing HOBOT-2S cleaning various surfaces

The HOBOT-2S is capable of cleaning multiple surfaces due to its high volume centrifugal pump that overcomes small air leakages.

6.6 സ്മാർട്ട്ഫോൺ ആപ്പ് നിയന്ത്രണം

Download the HOBOT APP to control the robot, receive notifications, and monitor task completion. The app provides a convenient interface for managing your cleaning tasks.

Smartphone screen showing the HOBOT app interface for controlling the robot

The HOBOT smartphone application allows for remote control and monitoring of the robot's cleaning process.

6.7 വോയ്സ് പ്രോംപ്റ്റുകൾ

The HOBOT-2S provides voice prompts to update its progress and status, keeping you informed throughout the cleaning cycle.

Diagram showing HOBOT-2S with speech bubbles indicating voice prompts

The HOBOT-2S communicates its status and progress through clear voice prompts.

7. പരിപാലനം

7.1 Cleaning and Replacing Cleaning Cloths

After each use, remove and clean the microfiber cloths. They can be hand-washed or machine-washed. Replace worn or damaged cloths to ensure effective cleaning.

7.2 Replacing Water Tanks/Nozzles

In case the ultrasonic spraying nozzle becomes clogged or the water tank is damaged, you can replace the entire water tank or spraying nozzle unit using a standard screwdriver. Refer to the diagram in Section 4.3 for guidance.

7.3 ഫേംവെയർ അപ്‌ഡേറ്റുകൾ (OTA)

Keep your HOBOT-2S updated with the latest features by regularly updating its firmware over-the-air (OTA) via the smartphone app. The app will also send cleaning reminders every 3 months.

Diagram showing OTA firmware update and cleaning reminder features

The HOBOT app facilitates OTA firmware updates and provides cleaning reminders to maintain optimal performance.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your HOBOT-2S, refer to the table below for common problems and solutions.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Robot loses suction or falls.Air leakage, dirty cleaning cloths, uneven surface, non-rectangular frame edges.Ensure cleaning cloths are clean and properly attached. Check for any obstructions or unevenness on the glass. The edge-leakage sensor technology detects slight lifts; ensure proper contact. Do not use on rounded edges.
Streaks left on glass.Dirty cleaning cloths, insufficient or incorrect cleaning solution, clogged spray nozzles.Replace or clean cloths. Use distilled water or HOBOT-approved solution. Check and replace water tanks/nozzles if clogged. Run a dry cycle first on very dirty windows, then a wet cycle.
Robot not moving or stuck.Power cord obstruction, insufficient suction, minimum area not met.Ensure power cord is free. Verify strong suction. Confirm cleaning area is at least 15x15 inches.
Water leakage from tank.Improperly sealed tank, damaged tank.Ensure tank caps are tightly closed. If leakage persists, replace the water tank unit.
Robot does not go up.Tread issue, suction problem.Ensure cleaning cloths are clean and not hindering tread movement. Check for sufficient suction. Contact support if problem persists.
Diagram illustrating the Edge-Leakage Sensor technology

The Edge-Leakage Sensor technology helps detect air leakage around window seals or frameless window edges, aiding in troubleshooting suction issues.

9 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
നിർമ്മാതാവ്ഹോബോട്ട്
ബ്രാൻഡ്ഹോബോട്ട്
ഇനത്തിൻ്റെ ഭാരം5.76 പൗണ്ട്
ഉൽപ്പന്ന അളവുകൾ19.69 x 19.69 x 11.02 ഇഞ്ച്
ഇനം മോഡൽ നമ്പർHobot2s
ബാറ്ററികൾ1 Lithium Polymer battery required (for UPS)
നിറംവെള്ള
ആകൃതിസമചതുരം
പവർ ഉറവിടംCorded Electric (robot works with power cord ONLY)
ആദ്യം ലഭ്യമായ തീയതിജൂൺ 16, 2021

10. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official HOBOT website or your point of purchase. You may also find additional support and FAQs on the HOBOT Amazon store page.

അനുബന്ധ രേഖകൾ - Hobot2s

പ്രീview Hobot-188 Robot for Glass Cleaning User Manual
User manual for the Hobot-188 robot, providing instructions on operation, safety, features, specifications, and troubleshooting for automatic glass cleaning.
പ്രീview HOBOT-188 Intelligent Window Cleaner Robot User Manual
User manual for the HOBOT-188 intelligent window cleaner robot, covering safety instructions, specifications, features, operation, troubleshooting, and maintenance.
പ്രീview HOBOT-2S Robot do mycia okien - Instrukcja obsługi
Kompletna instrukcja obsługi robota do mycia okien HOBOT-2S. Zawiera informacje o bezpieczeństwie, obsłudze, konserwacji, rozwiązywaniu problemów i specyfikacje techniczne.
പ്രീview HOBOT-S7 Pro: Návod k obsluze a specifikace robotického čističe oken
Kompletní návod k obsluze pro robotický čistič oken HOBOT-S7 Pro. Zjistěte informace o funkcích, bezpečnosti, údržbě a specifikacích tohoto pokročilého okenního robota.
പ്രീview HOBOT-188 Robot Window Cleaner User Manual and Specifications
Comprehensive user manual for the HOBOT-188 robot window cleaner, covering setup, operation, safety, specifications, and troubleshooting. Includes detailed instructions, features, and FAQs.
പ്രീview HOBOT-368: Návod k obsluze robotického čističe oken
Kompletní návod k obsluze a údržbě robotického čističe oken HOBOT-368. Zahrnuje bezpečnostní pokyny, návod k použití, řešení problémů a technické specifikace pro efektivní čištění skel.