SSK M.2 NVMe SSD Enclosure (Model HE-C327)

ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SSK M.2 NVMe SSD Enclosure, Model HE-C327. This enclosure is designed for M.2 NVMe PCIe M Key SSDs of sizes 2230, 2242, 2260, and 2280. It offers high-speed data transfer up to 10Gbps via USB 3.2 Gen 2 and features a tool-free design for easy assembly.

പ്രധാന കുറിപ്പ്: This enclosure is അനുയോജ്യമല്ല with B Key, B+M Key SATA SSDs, M.2 PCIe AHCI SSDs, mSATA SSDs, or non-M.2 form factor SSDs. Ensure your SSD is an M.2 NVMe PCIe M Key type before installation.

Image: The SSK M.2 NVMe SSD Enclosure, silver-grey in color, shown with its two included USB cables (USB-C to USB-C and USB-C to USB-A).

പാക്കേജ് ഉള്ളടക്കം

• SSK M.2 NVMe SSD Enclosure (Model HE-C327)
• USB-C മുതൽ USB-C കേബിൾ വരെ
• USB-C മുതൽ USB-A കേബിൾ വരെ
• Thermal Pads (2x)

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

എൻക്ലോഷറിൽ നിങ്ങളുടെ M.2 NVMe SSD ഇൻസ്റ്റാൾ ചെയ്യാൻ ഈ ഘട്ടങ്ങൾ പാലിക്കുക:

1. എൻക്ലോഷർ തുറക്കുക: Gently slide the enclosure open to remove the internal tray.

Image: A hand sliding the silver enclosure cover to reveal the internal tray.
2. SSD ഇടുക: Carefully insert your M.2 NVMe SSD into the PCB slot at a 45-degree angle. Ensure the M-Key notch aligns correctly.


Image: An M.2 NVMe SSD being inserted into the internal PCB at an angle.

3. SSD സുരക്ഷിതമാക്കുക: Gently push the SSD down until it is flat. Insert the fixing screw (Screw A) into the slot at the end of the M.2 SSD and tighten it to secure the SSD. Ensure the screw is properly seated in the groove to avoid obstruction.


Image: A small screw being inserted to hold the M.2 SSD in place on the PCB.

4. തെർമൽ പാഡ് പ്രയോഗിക്കുക: Place a thermal pad onto the installed SSD. Remove the protective film from both sides of the thermal pad. This aids in heat dissipation.

Image: A thermal pad being placed on top of the installed M.2 SSD.
5. എൻക്ലോഷർ അടയ്ക്കുക: Align the internal tray with the enclosure shell and slide it back in the direction of the arrow until it clicks into place, indicating it is locked.


Image: The internal tray with the SSD and thermal pad being slid back into the enclosure shell.

Image: A diagram illustrating the supported M.2 NVMe SSD sizes: 2230, 2242, 2260, and 2280.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The SSK M.2 NVMe SSD Enclosure is plug-and-play, requiring no additional drivers for most operating systems.

• കണക്ഷൻ: Connect the enclosure to your computer using one of the provided USB cables (USB-C to USB-C or USB-C to USB-A). The enclosure is bus-powered and does not require an external power supply.
• ഇൻഡിക്കേറ്റർ ലൈറ്റ്: A blue indicator light will illuminate when the device is plugged in. It will blink during data transfer, indicating activity.
• അനുയോജ്യത: The enclosure is compatible with Windows 7/8/8.1/10, Linux, and Mac OS.

Image: The SSK enclosure connected to a laptop, with icons representing Windows, Mac OS, Linux, and Android compatibility.

Image: A close-up of the enclosure highlighting the blue indicator light and its aluminum construction for heat dissipation.

മെയിൻ്റനൻസ്

• ചുറ്റുപാട് വൃത്തിയായും പൊടി വിമുക്തമായും സൂക്ഷിക്കുക. വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക.
• തീവ്രമായ താപനിലയിലോ ഈർപ്പത്തിലോ ഉപകരണം തുറന്നുകാട്ടുന്നത് ഒഴിവാക്കുക.
• Handle the enclosure and installed SSD with care to prevent physical damage.
• അലൂമിനിയം സി.asing is designed for optimal heat dissipation. It is normal for the enclosure to become warm during extended use, especially during high-speed data transfers.

Image: A chart displaying temperature measurements of the enclosure and SSD over a 30-minute period, demonstrating effective temperature control.

ട്രബിൾഷൂട്ടിംഗ്

• SSD കണ്ടെത്തിയില്ല: If a newly installed SSD is not detected by your computer, it may need to be initialized, partitioned, and formatted. Access Disk Management (Windows) or Disk Utility (Mac OS) to perform these actions. For compatibility across both Mac and Windows operating systems, format the SSD to EXFAT.
• മന്ദഗതിയിലുള്ള ട്രാൻസ്ഫർ വേഗത: Ensure you are connecting the enclosure to a USB 3.2 Gen 2 (10Gbps) compatible port on your computer. Older USB ports (e.g., USB 2.0, USB 3.0/3.1 Gen 1) will result in lower transfer speeds. Verify your SSD is an NVMe PCIe M Key type, as SATA SSDs are not supported and will not function.
• Incompatible SSD: This enclosure supports M.2 NVMe PCIe M Key SSDs only. It does not support B Key, B+M Key SATA SSDs, M.2 PCIe AHCI SSDs, mSATA SSDs, or non-M.2 form factor SSDs. It is also not compatible with original MacBook SSDs.
• Enclosure Not Opening/Closing Smoothly: Ensure no internal components are obstructing the sliding mechanism. Check that the SSD is properly secured and the screw is not protruding.

Image: A visual guide distinguishing between supported M.2 NVMe PCIe M Key SSDs and unsupported B Key, B+M Key SATA, and other M.2 types.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For product support or inquiries, please refer to the contact information provided with your purchase or visit the official SSK webസൈറ്റ്. പ്രദേശത്തെയും റീട്ടെയിലറെയും ആശ്രയിച്ച് നിർദ്ദിഷ്ട വാറന്റി വിശദാംശങ്ങൾ വ്യത്യാസപ്പെടാം.