Segotep 657768584329

Segotep PC Power Button Extension Cable User Manual

മോഡൽ: 657768584329

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Segotep PC Power Button On/Off Reset HDD Button Extension Cable provides a convenient external control solution for your desktop computer. This device allows you to power on/off, reset your PC, and monitor hard drive activity from a remote location, eliminating the need to reach for the computer case's built-in buttons. It features a 5.3-foot cable, making it suitable for various setups, including offices, homes, internet cafes, and multimedia classrooms.

Segotep PC Power Button Extension Cable with blue LED light

Image: The Segotep PC Power Button Extension Cable, featuring a prominent blue LED power button, a smaller reset button, and the various motherboard connector cables.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

ഇൻസ്റ്റലേഷൻ ഗൈഡ്

Follow these steps carefully to install your Segotep PC Power Button Extension Cable. Ensure your computer is powered off and unplugged from the wall outlet before beginning installation.

  1. ചേസിസ് തയ്യാറാക്കുക: Remove a chassis expansion slot baffle from the back of your computer case. The specific baffle to remove may vary depending on your computer case design.

    Step 1: Removing a chassis expansion slot baffle

    Image: Illustration showing the removal of a metal expansion slot cover from the back of a PC case.

  2. മദർബോർഡിലേക്ക് കണക്റ്റുചെയ്യുക: Carefully connect the I/O connector cables from the extension switch through the expansion slot to the corresponding FPANEL port on your motherboard. Refer to your motherboard's manual for the exact pinout of the front panel header (FPANEL).

    Motherboard front panel connector pinout diagram

    Image: Diagram showing the various front panel connectors (POWER LED+, POWER LED-, POWER SW, RESET SW, H.D.D LED+) and a close-up of a motherboard's FPANEL header.

    The cable includes a metal sleeve designed to sit securely in the card-slot cover, preventing accidental pulling or disconnection from the motherboard, thus ensuring safety and stability.

  3. കേബിൾ സുരക്ഷിതമാക്കുക: Fix the buckle in the middle of the cable to the groove of the cable fixing baffle. This helps manage the cable and keeps it tidy.

  4. Install Fixing Baffle: Install the cable fixing baffle to the corresponding expansion slot and secure it with screws. This holds the cable firmly in place at the back of the case.

  5. അന്തിമ സ്ഥാനം: Position the external power button unit in a convenient location on your desk or workspace. The 5.3-foot cable provides ampഫ്ലെക്സിബിൾ പ്ലേസ്മെൻ്റിനുള്ള le നീളം.

    Segotep PC Power Button Extension Cable placed on a desk next to a monitor

    Image: The external power button unit positioned on a desk, demonstrating its use in a typical computer setup.

ഓപ്പറേഷൻ

Operating the Segotep PC Power Button Extension Cable is straightforward:

Finger pressing the power button on the extension cable

Image: A hand pressing the illuminated blue power button on the Segotep extension cable.

മെയിൻ്റനൻസ്

The Segotep PC Power Button Extension Cable requires minimal maintenance to ensure its longevity and proper function:

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Segotep PC Power Button Extension Cable, refer to the following common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Computer does not power on/off when button is pressed.
  • Incorrect connection to motherboard.
  • അയഞ്ഞ കണക്ഷൻ.
  • Motherboard front panel header issue.
  • Verify that the "POWER SW" connector is correctly plugged into the motherboard's power switch pins. Consult your motherboard manual for the correct pinout.
  • Ensure all connectors are firmly seated.
  • Test the motherboard's front panel header with the original case power button if available, or by momentarily shorting the power pins with a screwdriver (only if comfortable and knowledgeable).
Blue LED does not light up.
  • Incorrect "POWER LED" connection.
  • Reversed polarity of LED connector.
  • Check that the "POWER LED+" and "POWER LED-" connectors are correctly plugged into the motherboard's power LED pins.
  • If the LED does not light up, try reversing the "POWER LED+" and "POWER LED-" connectors, as LEDs are polarity sensitive.
Red LED (HDD activity) does not flicker.
  • Incorrect "H.D.D LED" connection.
  • Reversed polarity of LED connector.
  • Check that the "H.D.D LED+" and "H.D.D LED-" connectors are correctly plugged into the motherboard's HDD LED pins.
  • If the LED does not light up, try reversing the "H.D.D LED+" and "H.D.D LED-" connectors.
Reset button does not work.
  • Incorrect "RESET SW" connection.
  • അയഞ്ഞ കണക്ഷൻ.
  • Verify that the "RESET SW" connector is correctly plugged into the motherboard's reset switch pins.
  • Ensure the connector is firmly seated.

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ്സെഗോടെപ്
മോഡൽ നമ്പർ657768584329
കണക്റ്റർ തരംStandard Front Panel Connectors (Power SW, Reset SW, Power LED, HDD LED)
കേബിൾ നീളംഏകദേശം. 5.3 അടി (1.6 മീറ്റർ)
അനുയോജ്യമായ ഉപകരണങ്ങൾDesktop PCs, Computer Cases
LED സൂചകങ്ങൾBlue (Power), Red (HDD Activity)
ഉൽപ്പന്ന അളവുകൾ (L x W x H)5.51 x 4.72 x 1.97 ഇഞ്ച്
ഇനത്തിൻ്റെ ഭാരം5 ഔൺസ്
പരമാവധി വോളിയംtage12 വോൾട്ട് (DC)

വാറൻ്റിയും പിന്തുണയും

Segotep products are designed for reliability and performance. This product is covered by a 5 വർഷത്തെ വാറൻ്റി, reflecting Segotep's commitment to quality and customer satisfaction.

For technical support, troubleshooting assistance, or warranty claims, please contact Segotep customer service through their official webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങൾ ഉൽപ്പന്നം വാങ്ങിയ റീട്ടെയിലർ. പിന്തുണയുമായി ബന്ധപ്പെടുമ്പോൾ നിങ്ങളുടെ മോഡൽ നമ്പറും (657768584329) വാങ്ങൽ വിവരങ്ങളും തയ്യാറായി വയ്ക്കുക.

For more information about Segotep and their products, you can visit the official Segotep store on Amazon: Segotep Amazon Store.

അനുബന്ധ രേഖകൾ - 657768584329

പ്രീview Segotep Slath Mini PC Case Assembly and Usage Guide
Essential tips and step-by-step instructions for assembling and using the Segotep Slath Mini PC case, covering prohibited uses and proper installation procedures.
പ്രീview Segotep Phoenix T1 PC Case Installation Guide
Detailed installation instructions for the Segotep Phoenix T1 PC case, covering fan, radiator, storage, and cable management setup.
പ്രീview സെഗോടെപ്പ് കെഎൽ-എയോലസ് പിസി കേസ് ഇൻസ്റ്റലേഷൻ ഗൈഡ്
സെഗോടെപ് കെഎൽ-എയോലസ് പിസി കേസിനായുള്ള സമഗ്രമായ ഇൻസ്റ്റലേഷൻ മാനുവൽ, ഫാൻ, ലിക്വിഡ് കൂളർ, മദർബോർഡ്, പിഎസ്‌യു, ഗ്രാഫിക്സ് കാർഡ് ഇൻസ്റ്റാളേഷൻ എന്നിവയ്ക്കുള്ള ഘട്ടങ്ങൾ വിശദമായി വിവരിക്കുന്നു.
പ്രീview Segotep Gold Power Supply User Manual
User manual for Segotep Gold Power Supplies, covering installation, features, Q&A, and specifications for 750W, 850W, 1250W, 1600W, 2000W, and 750W SFX models.