Lepro Solar Motion Sensor Light Instruction Manual

ആമുഖം

Thank you for choosing the Lepro Solar Motion Sensor Light. This manual provides essential information for the safe and efficient use of your new solar light. Please read it thoroughly before installation and retain it for future reference.

This product features a separated solar panel and light body, connected by a 4.8-meter extension cable, allowing flexible placement. It is designed for outdoor use, offering 1000 lumens of ultra-bright, 3-sided illumination with a 360-degree adjustable angle. The light is IP65 waterproof and equipped with a motion sensor for automatic activation.

പാക്കേജ് ഉള്ളടക്കം

• Motion Sensor Light x 2
• Wall Mount Holder x 2
• സ്ക്രൂകൾ x 8
• വാൾ പ്ലഗ് x 8
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ x 1

Image: Package contents showing two light units, mounting hardware, and the instruction manual.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. ഒരു ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a location for the solar panel where it can receive 6-8 hours of direct sunlight daily for optimal charging. The light unit can be placed up to 4.8 meters away from the solar panel thanks to the extension cable.
2. ഹോൾഡർ മൌണ്ട് ചെയ്യുക: Use the provided screws and wall plugs to securely attach the wall mount holder to your desired surface.
3. Attach the Light Unit: Slide the solar light unit onto the mounted holder until it clicks into place.
4. കേബിൾ ബന്ധിപ്പിക്കുക: Insert the cable from the solar panel into the light unit's port. Ensure a firm connection.
5. വെളിച്ചം സജീവമാക്കുക: Locate the ON/OFF button on the back of the light unit. Press it to turn the unit ON. The light will only activate in dark environments when motion is detected.

Image: Detail of the light unit sliding into the mounting bracket.

Image: Step-by-step installation guide for the solar light.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

മോഷൻ സെൻസർ പ്രവർത്തനം

The Lepro Solar Motion Sensor Light is designed to operate automatically. Once activated (ON position), it will:

• Charge during the day using solar energy.
• Remain off during daylight hours.
• Automatically turn on for approximately 20 seconds when motion (human or vehicle) is detected in a dark environment.
• Automatically turn off after 20 seconds if no further motion is detected.

The motion sensor has a detection range of up to 8 meters and a 120-degree angle. The light's two side panels can be rotated 360 degrees, allowing you to adjust the illumination direction and coverage area.

Image: Motion detection range and activation at night.

Image: Automatic charging during the day and 20-second illumination at night.

ലൈറ്റ് പാനലുകൾ ക്രമീകരിക്കുന്നു

The two side light panels can be manually rotated 360 degrees to direct light precisely where needed, providing a wide 270-degree illumination angle.

Image: Adjustable light panels and separated solar panel design.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To ensure optimal performance, periodically clean the solar panel and light surface. Dust, dirt, or debris can reduce charging efficiency and light output. Use a soft, damp cloth to wipe the surfaces gently. Avoid abrasive cleaners or harsh chemicals.

കാലാവസ്ഥ പ്രതിരോധം

The Lepro Solar Motion Sensor Light is designed with an IP65 waterproof rating and constructed from durable ABS material, making it resistant to heat and freezing temperatures. It can safely operate in various weather conditions, including heavy rain, snow, and extreme temperatures.

Image: IP65 waterproof and weather-resistant features.

ട്രബിൾഷൂട്ടിംഗ്

• രാത്രിയിൽ ലൈറ്റ് കത്തുന്നില്ല:
  • Ensure the ON/OFF button on the back of the unit is pressed to the ON position.
  • Verify the solar panel is receiving 6-8 hours of direct sunlight daily. Partial charging may occur on cloudy days, but full charge requires direct sun.
  • Check if there are other strong light sources nearby. The motion sensor light is designed to activate only in dark environments.
  • The internal battery might be depleted. Allow several days of full sunlight charging.
• വെളിച്ചം നിരന്തരം പ്രകാശിക്കുന്നു അല്ലെങ്കിൽ മിന്നുന്നു:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check for any obstructions or reflective surfaces that might be triggering the sensor.
• പ്രകാശ ഔട്ട്പുട്ട് മങ്ങിയതാണ്:
  • Clean the solar panel and light surface to remove any dirt or debris that may be hindering performance.
  • പരമാവധി സൂര്യപ്രകാശം ഏൽക്കുന്നതിന് സോളാർ പാനൽ സ്ഥാപിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • The battery may not be fully charged. Allow more time for charging in direct sunlight.

ഉൽപ്പന്ന സവിശേഷതകൾ

വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Lepro website. Optional protection plans may be available for purchase from third-party providers.

For customer support, technical assistance, or to view the latest user manual PDF data, please visit the ആമസോണിലെ ലെപ്രോ സ്റ്റോർ or contact Lepro customer service directly.