മോയിൻ T2261

Moen Cia Chrome 1-Handle Posi-Temp Pressure Balancing Valve Trim Kit

Model: T2261 | Brand: Moen

1. ആമുഖം

This instruction manual provides detailed information for the installation, operation, and maintenance of your Moen Cia Chrome 1-Handle Posi-Temp Pressure Balancing Valve Trim Kit. The Cia suite combines modern style with advanced technology, featuring contemporary curves and defined edges for a classic yet fresh aesthetic. This trim kit is designed to complement various bath decors.

2 സുരക്ഷാ വിവരങ്ങൾ

Always turn off the main water supply before beginning any plumbing installation or repair. Ensure all connections are secure to prevent leaks. If you are unsure about any step, consult a qualified plumber. This product is designed for wall-mounted installation. Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. പാക്കേജ് ഉള്ളടക്കം

Your Moen Cia Trim Kit includes the following components:

Note: The Moen Posi-Temp valve (models 2510, 2520, 2570, or 2590) is required for installation and is sold separately.

Moen Cia Chrome 1-Handle Posi-Temp Pressure Balancing Valve Trim Kit

Figure 3.1: Moen Cia Chrome 1-Handle Posi-Temp Pressure Balancing Valve Trim Kit (T2261).

Moen Posi-Temp Valve (sold separately)

ചിത്രം 3.2: ഉദാample of a Moen Posi-Temp Valve, which is required for installation and sold separately.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This trim kit is designed to be installed with a compatible Moen Posi-Temp valve (not included). Refer to the installation instructions provided with your Moen Posi-Temp valve for detailed rough-in and valve body installation. Once the valve body is installed and water connections are made, proceed with the trim kit installation.

  1. Ensure the water supply to the valve is turned off.
  2. Align the trim plate over the installed valve body, ensuring it sits flush against the wall.
  3. Secure the trim plate using the provided screws. Ensure screws are tightened evenly to prevent warping.
  4. Install the handle onto the valve stem. The handle should slide onto the stem and be secured with the set screw (if applicable).
  5. Test the installation for leaks and proper operation by slowly turning on the water supply.

For detailed visual guidance, please refer to the official Moen installation videos or consult a professional plumber.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Moen Cia 1-Handle Posi-Temp Pressure Balancing Valve Trim Kit provides easy control over water temperature and flow.

6. പരിപാലനം

To maintain the appearance and performance of your Moen Cia trim kit, follow these cleaning guidelines:

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
വെള്ളത്തിന്റെ ഒഴുക്കോ താഴ്ന്ന മർദ്ദമോ ഇല്ല.Main water supply off; clogged aerator (if applicable); valve issue.Check main water supply; clean aerator; consult valve manual or plumber.
Water temperature is too hot or too cold.Temperature limit stop setting; Posi-Temp cartridge issue.Adjust temperature limit stop (refer to valve manual); replace cartridge if necessary.
Leaking from handle or trim plate.അയഞ്ഞ കണക്ഷനുകൾ; തേഞ്ഞുപോയ O-റിംഗുകൾ അല്ലെങ്കിൽ കാട്രിഡ്ജ്.Tighten connections; replace O-rings or cartridge.

If issues persist after attempting these solutions, please contact Moen Customer Support.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

This Moen product is backed by Moen's Limited Lifetime Warranty, ensuring quality and durability. For detailed warranty information, please refer to the official Moen webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

For technical assistance, replacement parts, or warranty claims, please contact Moen Customer Support:

അനുബന്ധ രേഖകൾ - T2261

പ്രീview മോയിൻ വൺ ഹാൻഡിൽ ടബ്/ഷവർ വാൽവ് ട്രിം ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
വൺ ഹാൻഡിൽ ടബ്/ഷവർ വാൽവ് ട്രിം, വൺ ഹാൻഡിൽ ഷവർ ഒൺലി വാൽവ് ട്രിം എന്നിവയുൾപ്പെടെ മോയിൻ വൺ-ഹാൻഡിൽ ടബ്, ഷവർ വാൽവ് ട്രിമ്മുകൾക്കുള്ള ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങളും ട്രബിൾഷൂട്ടിംഗ് മാർഗ്ഗനിർദ്ദേശങ്ങളും ഈ ഡോക്യുമെന്റ് നൽകുന്നു. വിവിധ പ്ലംബിംഗ് റഫ്-ഇൻ തരങ്ങൾ, ഇൻസ്റ്റലേഷൻ സ്കീമാറ്റിക്സ്, ട്രിം ഇൻസ്റ്റാളേഷൻ, താപനില പരിധി സ്റ്റോപ്പ് ക്രമീകരണം, പരിചരണ നിർദ്ദേശങ്ങൾ, വാറന്റി വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview Moen Genta POSI-TEMP Single-Handle Tub/Shower Trim Kit Specifications
Detailed specifications for the Moen Genta POSI-TEMP Single-Handle Tub/Shower Trim Kit, including model numbers, operation, flow rate, cartridge type, standards, and warranty information.
പ്രീview Moen 26009 എൻഗേജ് മാഗ്നെറ്റിക്സ് ഷവർ ഹെഡും പോസി-ടെമ്പ് വാൽവ് ഇൻസ്റ്റാളേഷനും ഉപയോക്തൃ മാനുവലുകളും
Moen 26009 Engage Magnetix ഹാൻഡ്‌ഹെൽഡ് ഷവർ ഹെഡിനും Moen Posi-Temp Tub, ഷവർ വാൽവുകൾക്കും വേണ്ടിയുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവലുകളും ഇൻസ്റ്റാളേഷൻ ഗൈഡുകളും. ഉൽപ്പന്ന വിശദാംശങ്ങൾ, അസംബ്ലി നിർദ്ദേശങ്ങൾ, ഇൻസ്റ്റാളേഷൻ സ്കീമാറ്റിക്സ്, ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകൾ, വാറന്റി വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview Moen One-Handle Tub/Shower Trim Installation and Lifetime Warranty Guide
Detailed installation instructions, care guidelines, and lifetime limited warranty information for Moen One-Handle Tub/Shower Trim models T2151, T2152, T2153, T62151, T62152, T62153. Includes parts list, contact information, and multilingual warranty details.
പ്രീview Moen One-Handle Tub/Shower Trim Models T2211, T2212, T2213 Series - Installation Guide and Warranty
Installation instructions, parts list, care guide, and lifetime limited warranty for Moen one-handle tub/shower trim models T2211, T2212, T2213 series.
പ്രീview Moen IVER™ Single-Handle POSI-TEMP® Tub/Shower Trim Kit Illustrated Parts List
Detailed illustrated parts list for the Moen IVER™ Single-Handle POSI-TEMP® Tub/Shower Trim Kit, including part numbers and finishes for models T2571, T2572EP/NH, and T2583EP/NH series.