1. ഉൽപ്പന്നം കഴിഞ്ഞുview
This Okin Touch Sensor Control Box Set is a replacement component designed for single-motor electric furniture, including lift chairs, electric recliners, and power supply sofas. It is compatible with various brands such as Limoss, Okin, and Kaidi. This set provides the necessary control for one actuator/motor, featuring a 5-pin round plug for connection.
Figure 1: Complete Okin Touch Sensor Control Box Set, showing the control box, wiring, and two touch sensors.
2 സുരക്ഷാ വിവരങ്ങൾ
- ഈ ഉൽപ്പന്നം രൂപകൽപ്പന ചെയ്തിരിക്കുന്നത് ഇൻഡോർ ഉപയോഗം മാത്രം.
- The control box has a water resistance rating of IP20. Electronic components must not be exposed to water or wet conditions.
- When assembling the black and white lead wires, ensure they are not twisted together.
- കുറഞ്ഞ അകലം പാലിക്കുക 100mm (approximately 4 inches) when routing wires inside the sofa armrest to prevent interference.
- Exercise caution with SM connectors, as they feature a locking structure. Always ensure the correct connection between female and male connectors. To disconnect, first loosen the locking bar before pulling the connectors apart.
3. ഉൽപ്പന്ന സവിശേഷതകൾ
| സ്പെസിഫിക്കേഷൻ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | Okin |
| മോഡൽ നമ്പർ | JLDK.08.01.00-D1 |
| നിറം | കറുപ്പ് |
| വലിപ്പം | നീണ്ട ബട്ടൺ |
| അനുയോജ്യത | Single-motor electric furniture (recliners, adjustable beds) from brands like Limoss, Okin, Kaidi. Not for chairs with control motors. |
| പ്ലഗ് തരം | 5-pin round plug, 90-degree angle |
| നിയന്ത്രണ ശേഷി | One actuator/motor |
| മെറ്റീരിയൽ | ഉയർന്ന കരുത്തുള്ള ABS പ്ലാസ്റ്റിക് |
| വാട്ടർപ്രൂഫ് ക്ലാസ് | IP20 |
| ഇനത്തിൻ്റെ ഭാരം | 6.8 ഔൺസ് |
| മാതൃരാജ്യം | ചൈന |
4. പാക്കേജ് ഉള്ളടക്കം
The Okin Touch Sensor Control Box Set includes the following components:
- 1 × Control Box
- 1 × Cable with 5-pin round plug
- Black and White Lead Wires
- 2 × Touch Sensors
Figure 2: Detail of the two touch sensors and their associated black and white lead wires.
5. ഇൻസ്റ്റലേഷൻ മാർഗ്ഗനിർദ്ദേശങ്ങൾ
Follow these steps for proper installation of the Okin Touch Sensor Control Box Set:
- അനുയോജ്യത പരിശോധിക്കുക: Before beginning installation, confirm that your electric furniture uses a single motor and is from a compatible brand (e.g., Limoss, Okin, Kaidi). This set is not suitable for reclining chairs with control motors.
- Identify Model Number: Locate the model number on your existing control box or motor to ensure it matches the JLDK.08.01.00-D1 model.
ചിത്രം 3: ഉദാample of a product label, highlighting the model number for verification.
- പവർ വിച്ഛേദിക്കുക: Always unplug the furniture from the power outlet before attempting any installation or replacement.
- പഴയ ഘടകങ്ങൾ നീക്കം ചെയ്യുക: Carefully disconnect and remove the existing touch sensor and control box components from your furniture. Note the routing of wires for easier installation of the new set.
- കൺട്രോൾ ബോക്സ് ബന്ധിപ്പിക്കുക: Connect the 5-pin round plug from the new control box to the corresponding port on your furniture's motor. Ensure the connection is secure.
Figure 4: Detail of the 5-pin round plug, which connects to the motor.
- Connect Touch Sensors: Connect the black and white lead wires from the touch sensors to the control box. It is crucial that these wires are connected correctly and not twisted together to ensure proper polarity and function.
- വയർ മാനേജ്മെൻ്റ്: When routing the wires inside the sofa armrest or furniture frame, maintain a minimum distance of 100mm (approximately 4 inches) between the touch buttons and other wires. This helps prevent signal interference.
- സുരക്ഷിത ഘടകങ്ങൾ: Secure the new control box and touch sensors in their designated locations within the furniture. The control box is constructed with high-strength ABS plastic for durability.
- പവർ വീണ്ടും ബന്ധിപ്പിക്കുക: Once all connections are secure and components are properly mounted, plug the furniture back into the power outlet.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
After successful installation, the Okin Touch Sensor Control Box Set enables the operation of your single-motor electric furniture.
- പ്രവർത്തനക്ഷമത: The touch sensors will now control the movement of the furniture's actuator/motor, allowing for reclining or lifting functions as designed by your furniture.
- ഉപയോഗം: Gently press the touch sensors to activate the motor and adjust the furniture's position. Release the sensor to stop movement.
7. പരിപാലനം
To ensure the longevity and proper functioning of your Okin Touch Sensor Control Box Set, follow these simple maintenance guidelines:
- വൃത്തിയാക്കൽ: Wipe clean the control box and touch sensors with a dry, soft cloth. Do not use liquid cleaners or immerse any part of the product in water.
- പരിസ്ഥിതി: Always ensure the product is used in an indoor, dry environment. Avoid exposure to moisture, excessive heat, or direct sunlight.
- കേബിൾ പരിശോധന: Periodically inspect all cables and connections for any signs of wear, damage, or loose connections. Address any issues promptly.
8. പ്രശ്നപരിഹാരം
If you encounter issues with your Okin Touch Sensor Control Box Set, consider the following troubleshooting steps:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Furniture does not move. | വൈദ്യുതി വിതരണം ഇല്ല. അയഞ്ഞ കണക്ഷൻ. Incorrect wiring of lead wires. | Ensure furniture is plugged into a working outlet. Check all connections, especially the 5-pin plug and lead wires, ensuring they are secure. Verify that black and white lead wires are not twisted and are connected correctly. |
| Intermittent operation or erratic movement. | സിഗ്നൽ ഇടപെടൽ. അയഞ്ഞ കണക്ഷൻ. | Ensure wires are routed with at least 100mm distance from touch buttons. ഇറുകിയതിനായി എല്ലാ കണക്ഷനുകളും പരിശോധിക്കുക. |
| Touch sensors unresponsive. | Faulty sensor or wiring. കൺട്രോൾ ബോക്സ് പ്രശ്നം. | Re-check lead wire connections to the control box. If problem persists, contact customer service. |
If troubleshooting steps do not resolve the issue, please contact Okin customer service for further assistance.
9. Customer Service & Support
Okin is committed to providing excellent customer service. If you have any questions, require technical support, or need assistance with your product, please do not hesitate to contact us.
Our dedicated team is available to ensure prompt problem-solving and customer satisfaction.
For more information about Okin products and support, you may visit the official Okin store on Amazon: Okin Store.
