1. ആമുഖം
This manual provides essential information for the safe and effective operation of your LASER TREE LT-80W-LE-Mini Laser Module. This high-power laser module features 10W optical output, double ultra-fine compressed spot technology, and is designed for engraving and cutting various materials. Please read this manual thoroughly before use.
2 സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: This product contains a high-power laser. Improper use can cause serious injury, including permanent eye damage and skin burns. Always adhere to the following safety precautions:
- നേത്ര സംരക്ഷണം: Always wear ANSI-certified laser safety goggles with appropriate Optical Density (OD) ratings for 450nm blue laser light. The integrated protective cover filters blue and ultraviolet light, but dedicated safety goggles are highly recommended for maximum protection.
- ചർമ്മ സംരക്ഷണം: ലേസർ ബീമിൽ നേരിട്ട് ചർമ്മം പതിക്കുന്നത് ഒഴിവാക്കുക.
- വെൻ്റിലേഷൻ: Ensure adequate ventilation in the work area to dissipate fumes and smoke generated during engraving or cutting.
- അഗ്നി അപകടം: Laser processing can ignite flammable materials. Always supervise the laser module during operation and have fire suppression equipment readily available.
- കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Keep children and pets away from the laser module and the work area during operation.
- വൈദ്യുതി വിച്ഛേദിക്കൽ: Disconnect power to the laser module when not in use or during maintenance.
- മെറ്റീരിയൽ സുരക്ഷ: Be aware of the materials you are processing. Some materials can produce toxic fumes when laser-cut or engraved.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The LT-80W-LE-Mini laser module is designed for easy integration with various DIY engraving machines, three-axis engraving machines, CNC milling machines, laser cutting machines, and 3D printers.
3.1 പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- LASER TREE LT-80W-LE-Mini Laser Module
- Connection Cable (XH2.54-3P socket)
- Mounting accessories (screws, wrenches, etc.)
- Protective cover (pre-installed)
3.2 ഇലക്ട്രിക്കൽ കണക്ഷൻ
The laser module requires a DC 12V power supply (3.2A to 3.5A recommended). It supports 5V PWM modulation for power control. Connect the XH2.54-3P socket to your engraving machine's control board. Ensure correct polarity before powering on.
3.3 മൗണ്ടിംഗ്
Mount the laser module securely onto your machine's gantry. The fixed focus design simplifies setup. Ensure the laser is perpendicular to your work surface for optimal performance.
3.4 സോഫ്റ്റ്വെയർ അനുയോജ്യത
The laser module is compatible with most laser engraver brands and mature engraving software such as LaserGRBL and LightBurn.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The LT-80W-LE-Mini module features a 10W optical power output and double ultra-fine compressed spot technology for enhanced performance.
4.1 ഫോക്കസിംഗ്
This laser module has a fixed focus. For optimal cutting and engraving, use the provided focus fixing plate to set the correct distance between the laser and the material. The recommended focus length is 45mm.
4.2 കൊത്തുപണി, മുറിക്കൽ ശേഷികൾ
The module can directly engrave mirror stainless steel without needing to paint it black. It offers super fast engraving speeds, up to 500mm/s for 304 stainless steel. Its cutting ability is remarkable, capable of cutting through 8mm thick plywood in a single pass at a speed of 1.5mm/s.
4.3 Recommended Settings for Cutting
Refer to the table below for recommended cutting parameters for plywood:
| കനം | കടന്നുപോകുന്നു | വേഗത | Plywood Edge (Exampലെ) |
|---|---|---|---|
| 2 മി.മീ | 1 | 7.5mm/s |  |
| 3 മി.മീ | 1 | 6mm/s | |
| 4 മി.മീ | 1 | 4.5mm/s | |
| 5 മി.മീ | 1 | 3.5mm/s | |
| 6 മി.മീ | 1 | 3mm/s | |
| 8 മി.മീ | 1 | 1.5mm/s | |
Note: The image in the table is a composite from the product page showing various plywood edge cuts.
4.4 അനുയോജ്യമായ വസ്തുക്കൾ
The laser module can engrave materials such as MDF, rubber, wood, paper, plastic, plywood, PCB board, aluminum, stainless steel, ceramic, and stone. For cutting, it is suitable for wood, acrylic, bamboo, and MDF.
പ്രധാനപ്പെട്ടത്: The laser module is unable to engrave blue, purple, white, or transparent materials, or aluminum without an oxide layer.
4.5 Performance Demonstration
Watch this video demonstrating the cutting capability of the LASER TREE LT-80W-LE-Mini laser module, specifically cutting through 8mm plywood in a single pass.
5. പരിപാലനം
Proper maintenance ensures the longevity and optimal performance of your laser module.
5.1 ലെൻസ് ക്ലീനിംഗ്
The laser module features a "Wind Gathering Hood" design which helps prevent smoke from damaging the focus lens, making it largely maintenance-free in this regard. However, if the lens becomes dirty or obscured, carefully clean it with a soft, lint-free cloth and a suitable optical cleaning solution. Avoid touching the lens directly with bare hands.
5.2 പൊതു പരിചരണം
- Keep the laser module free from dust and debris.
- Ensure proper airflow around the module to facilitate heat dissipation.
- Store the module in a dry, clean environment when not in use.
6. പ്രശ്നപരിഹാരം
This section addresses common issues you might encounter with your laser module.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലേസർ വെടിവയ്ക്കുന്നില്ല അല്ലെങ്കിൽ ദുർബലമായ ഔട്ട്പുട്ട്. | Incorrect power supply; loose connections; dirty lens; software settings. | Verify 12V 3.2A-3.5A power supply. Check all cable connections. Clean the laser lens. Ensure software power settings are correct. |
| Laser always on at full power, no PWM control. | Incompatibility with control board; incorrect wiring of PWM signal. | Verify your machine's control board is compatible with 5V PWM modulation. Check the wiring of the PWM signal line (often the third pin on the XH2.54-3P connector). Consult your machine's manual for specific wiring diagrams. |
| മോശം കൊത്തുപണി/മുറിക്കൽ നിലവാരം. | Incorrect focus; incorrect speed/power settings; material not suitable. | Ensure the laser is properly focused using the focus fixing plate. Adjust speed and power settings according to the material (refer to Section 4.3). Confirm the material is compatible (refer to Section 4.4). |
| മൊഡ്യൂളിന്റെ അമിത ചൂടാക്കൽ. | Insufficient airflow; prolonged high-power operation. | Ensure the cooling fan is unobstructed and functioning. Allow the module to cool down between long operations. |
If you encounter issues not listed here or require further assistance, please contact LASER TREE customer support.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ | LT-80W-LE-Mini |
| ഒപ്റ്റിക്കൽ ഔട്ട്പുട്ട് പവർ | 10W |
| Effect Output Power | 80W |
| തരംഗദൈർഘ്യം | 450nm (Blue Laser) |
| ഇൻപുട്ട് വോളിയംtage | DC 12V |
| ഇൻപുട്ട് കറൻ്റ് | 3.2A (3A-3.5A) |
| പവർ ക്രമീകരിക്കാവുന്ന | Support 5V PWM modulation |
| ഇൻപുട്ട് പോർട്ട് | XH2.54-3P socket |
| ദൈർഘ്യം ഫോക്കസ് ചെയ്യുക | 45mm (Fixed Focus) |
| മൊഡ്യൂൾ വലിപ്പം | 40x40x125mm |
| മെറ്റീരിയൽ | അലുമിനിയം അലോയ് |
| ഇനത്തിൻ്റെ ഭാരം | 9.1 ഔൺസ് (258 ഗ്രാം) |
| പ്രവർത്തന താപനില | 0~70°C |
| Diode Lifespan | 20,000 മണിക്കൂർ |
8. വാറൻ്റിയും പിന്തുണയും
LASER TREE is committed to providing high-quality products and customer satisfaction. For warranty claims, technical support, or any inquiries regarding your laser module, please contact LASER TREE customer service through the official channels provided at the point of purchase or on the manufacturer's webസൈറ്റ്. പിന്തുണയുമായി ബന്ധപ്പെടുമ്പോൾ നിങ്ങളുടെ ഉൽപ്പന്ന മോഡലും വാങ്ങൽ വിശദാംശങ്ങളും തയ്യാറായി വയ്ക്കുക.
For additional resources, you may refer to the official user guides available:
