ആമുഖം
This manual provides instructions for the installation and maintenance of the Fodsports Accessory Clamp Kits, designed for use with Fodsports FX6, FX6S, and FX-S Motorcycle Bluetooth Intercom Headsets. Please read this manual thoroughly before installation to ensure proper use and longevity of the product.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Fodsports Accessory Clamp Kit offers versatile mounting solutions for your Fodsports intercom unit. It includes both a traditional clamp and an adhesive mount, along with necessary hardware, to securely attach your intercom to various helmet types.
ബോക്സിൽ എന്താണുള്ളത്
The Fodsports Accessory Clamp Kit includes the following components:
- Clamp ബ്രാക്കറ്റ്
- Adhesive Mount Base
- മൗണ്ടിംഗ് സ്ക്രൂകൾ
- എൽ ആകൃതിയിലുള്ള സ്ക്രൂഡ്രൈവർ
Image description: A complete view of the Fodsports Accessory Clamp Kit components, including the clamp bracket, adhesive mount base, screws, and an L-shaped screwdriver.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Before installation, ensure your helmet surface is clean and dry.
Choosing Your Mounting Method
The kit provides two primary methods for attaching your intercom unit to your helmet: the clamp bracket or the adhesive mount base.
Clamp ബ്രാക്കറ്റ് ഇൻസ്റ്റാളേഷൻ
- Locate a suitable position on the left side of your helmet, typically between the outer and inner shells, where the clamp can securely grip.
- cl ലെ സ്ക്രൂകൾ അഴിക്കുകamp bracket using the provided L-shaped screwdriver.
- cl സ്ലൈഡ് ചെയ്യുകamp bracket onto the edge of your helmet, ensuring it is firmly seated.
- cl ഉറപ്പിക്കാൻ സ്ക്രൂകൾ മുറുക്കുകamp bracket in place. Do not overtighten.
- Slide your Fodsports intercom unit onto the installed clamp bracket until it clicks into place.
ചിത്രത്തിന്റെ വിവരണം: ഒരു ക്ലോസപ്പ് view of the Fodsports clamp bracket, showing its design for gripping the helmet edge.
Adhesive Mount Base Installation
- Select a flat, clean area on the left side of your helmet for the adhesive mount. Ensure the surface is free from dirt, grease, or moisture.
- Peel off the protective backing from the adhesive mount base.
- Press the adhesive mount base firmly onto the chosen helmet surface for at least 30 seconds.
- Allow the adhesive to cure for at least 24 hours before attaching the intercom unit to ensure maximum bond strength.
- Slide your Fodsports intercom unit onto the installed adhesive mount base until it clicks into place.
ചിത്രത്തിന്റെ വിവരണം: ഒരു ക്ലോസപ്പ് view of the Fodsports adhesive mount base, showing the adhesive backing.
Securing the Intercom Unit
ഒരിക്കൽ clamp or adhesive base is securely attached, slide your Fodsports FX6, FX6S, or FX-S intercom unit onto the mounting bracket. Ensure it is fully engaged and feels stable.
Image description: A Fodsports intercom unit securely mounted on the side of a motorcycle helmet using the clamp കിറ്റ്.
Operating the Clamp കിറ്റ്
Clamp kit itself does not have operational controls. Its function is to provide a stable and secure mounting point for your Fodsports Bluetooth intercom unit. Once the intercom is attached, refer to the specific user manual for your Fodsports FX6, FX6S, or FX-S intercom for operational instructions regarding its features (e.g., power, pairing, volume, communication).
മെയിൻ്റനൻസ്
- പതിവായി cl പരിശോധിക്കുകamp bracket or adhesive mount for any signs of wear, damage, or loosening.
- Ensure all screws on the clamp bracket remain tight. Re-tighten with the L-shaped screwdriver if necessary, but avoid overtightening.
- ക്ലീൻ വൃത്തിയാക്കുകamp kit components with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the plastic or adhesive.
- If using the adhesive mount, periodically check the bond strength. If the adhesive shows signs of weakening, consider replacing the mount or using the clamp ബ്രാക്കറ്റ്.
ട്രബിൾഷൂട്ടിംഗ്
Intercom Unit Feels Loose on Mount
- Cl പരിശോധിക്കുകamp സ്ക്രൂകൾ: cl ഉപയോഗിക്കുകയാണെങ്കിൽamp bracket, ensure the screws are sufficiently tightened.
- Verify Intercom Engagement: Make sure the intercom unit is fully slid onto the mounting bracket until it locks securely.
- കേടുപാടുകൾക്കായി പരിശോധിക്കുക: Examine both the clamp kit and the intercom's mounting slot for any cracks or deformities that might prevent a secure fit.
Adhesive Mount Not Sticking
- ഉപരിതല തയ്യാറാക്കൽ: Ensure the helmet surface was thoroughly cleaned and dried before application.
- ക്യൂറിംഗ് സമയം: Allow the adhesive to cure for the recommended 24 hours before attaching the intercom unit.
- താപനില: Apply the adhesive in a moderate temperature environment (e.g., room temperature) for optimal bonding. Extreme cold or heat can affect adhesion.
- ഉപരിതല തരം: The adhesive works best on smooth, non-porous surfaces.
Clamp Bracket Does Not Fit Helmet Edge
- ഹെൽമെറ്റ് അനുയോജ്യത: Some helmet designs may have edges that are too thick or shaped unusually for the standard clamp bracket. In such cases, the adhesive mount base is the recommended alternative.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡലിൻ്റെ പേര് | Clamp Kits for FX6 FX6S FX-S |
| ബ്രാൻഡ് | ഫോഡ്സ്പോർട്സ് |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Clamp with Screw, Adhesive Mount |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Fodsports FX6, FX6S, FX-S Motorcycle Bluetooth Intercom Headsets |
| ഇനത്തിൻ്റെ ഭാരം | 0.986 ഔൺസ് (ഏകദേശം 0.03 കിലോഗ്രാം) |
| പാക്കേജ് അളവുകൾ | 6.77 x 5.04 x 0.67 ഇഞ്ച് |
ശ്രദ്ധിക്കുക: മുൻകൂർ അറിയിപ്പ് കൂടാതെ സ്പെസിഫിക്കേഷനുകൾ മാറ്റത്തിന് വിധേയമാണ്.
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support regarding your Fodsports Accessory Clamp Kit, please refer to the documentation included with your original Fodsports intercom unit or visit the official Fodsports website. You may also contact Fodsports customer service directly for assistance.
Official Fodsports Store on Amazon: Fodsports Store
