WOBANE LED Display Light Kit (Model WBE006) Instruction Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your WOBANE LED Display Light Kit, Model WBE006. This kit is designed to provide versatile and efficient lighting for various applications such as showcases, bookshelves, kitchen counters, and other shelving units. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• ഇൻസ്റ്റാളേഷൻ അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണിക്ക് മുമ്പ് വൈദ്യുതി വിതരണം വിച്ഛേദിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• ഈ ഉൽപ്പന്നം ഇൻഡോർ ഉപയോഗത്തിന് മാത്രമായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്നു. വെള്ളത്തിലോ ഉയർന്ന ആർദ്രതയിലോ സമ്പർക്കം പുലർത്തരുത്.
• Use only the provided 24W ETL Listed power adapter. Using an incompatible adapter may damage the product or pose a fire hazard.
• Do not cut the LED strips at any point other than the designated cut marks.
• Avoid bending the LED strips sharply, as this may damage the internal circuitry.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• If any part of the kit is damaged, discontinue use immediately and contact customer support.

3. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

• 8 x 12-inch LED Light Bars
• 1 x 24W ETL Listed Power Supply
• 4 x 6.7-inch Straight Connectors
• 2 x 20-inch Straight Connectors
• 5 x 90-degree Connectors
• 2 x Cross Connectors
• 1 x "U" Style Connector
• 2 x Cable Holders
• 5 x PINs (for connectors)

ചിത്രം 1: ഓവർview of included components in the WOBANE LED Display Light Kit.

4. ഉൽപ്പന്ന സവിശേഷതകൾ

Figure 2: The included 24W ETL Listed power adapter.

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

5.1 തയ്യാറാക്കൽ

1. ഉപരിതലം വൃത്തിയാക്കുക: Ensure the installation surface is clean, dry, and free of dust or grease. This will ensure optimal adhesion of the LED strips.
2. നിങ്ങളുടെ ലേഔട്ട് ആസൂത്രണം ചെയ്യുക: Before peeling off the adhesive, plan the desired arrangement of your LED strips and connectors. Consider the length of the strips and the various connector types (straight, 90-degree, cross, U-shape) to achieve your desired lighting design.

Figure 3: Key steps for preparing the surface and attaching the LED strips.

5.2 Attaching LED Strips

3. തൊലിയും വടിയും: Carefully peel off the protective backing from the adhesive tape on the back of each LED strip.
4. സ്ഥാനവും അമർത്തലും: Firmly press the LED strip onto the prepared surface, ensuring good contact along the entire length.

5.3 Connecting LED Strips

The kit includes various connectors to create custom lighting configurations:

• Straight Connectors: Use these to extend the length of your LED strips in a straight line. The kit includes 6.7-inch and 20-inch options to bridge gaps.
• 90-Degree Connectors: Ideal for turning corners in cabinets or shelves.
• Cross Connectors: Allows for branching the LED strips in multiple directions, useful for creating unique patterns or lighting multiple sections from a central point.
• "U" Style Connector: Provides flexibility for specific corner or edge applications.

To connect, align the pins of the connector with the contact points on the LED strip and gently press them together. Ensure a secure connection for proper electrical contact.

Figure 4: Different types of connectors for flexible installation.

ചിത്രം 5: ഒരു മുൻample installation showing the use of connectors and the ON/OFF switch.

The LED strips can be cut at designated marks (typically every 3 LEDs) if a shorter length is required. Always cut only at these marked points to avoid damaging the strip.

Figure 6: Detailed diagram of LED strip dimensions and included accessories.

5.4 പവർ കണക്ഷൻ

5. Connect the power adapter to the end of your assembled LED strip configuration.
6. പവർ അഡാപ്റ്റർ ഒരു സാധാരണ ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിലേക്ക് പ്ലഗ് ചെയ്യുക.
7. Use the included cable holders to secure the power cable and prevent it from falling or being accidentally disconnected.

ചിത്രം 7: ഉദാample of using long connectors to bridge separate cabinets.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the LED light kit is fully installed and connected to power, you can operate it using the inline switch on the power cable.

• പവർ ഓൺ/ഓഫ്: Press the button on the inline switch to turn the lights on or off.
• തെളിച്ച ക്രമീകരണം: The inline switch may also feature touch controls for adjusting brightness levels. Refer to the specific switch design for detailed operation.

7. പരിപാലനം

• വൃത്തിയാക്കൽ: To clean the LED strips, ensure the power is disconnected. Gently wipe the strips with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• പശയുടെ ആയുസ്സ്: Over time, the adhesive tape may lose its stickiness, especially in areas with temperature fluctuations or high humidity. If strips begin to detach, clean the surface and reapply with new double-sided adhesive tape suitable for the application.
• ഘടക പരിശോധന: Periodically inspect all connections and cables for any signs of wear or damage.

8. പ്രശ്‌നപരിഹാരം

9. വാറണ്ടിയും ഉപഭോക്തൃ പിന്തുണയും

WOBANE products are designed for quality and reliability. For any questions, technical assistance, or warranty inquiries, please contact WOBANE customer support.

You can find more information and contact details on the official WOBANE store: WOBANE Store on Amazon.