ഇന്റൽ NUC 10 പെർഫോമൻസ് NUC10i5FNKN ബെയർബോൺ സിസ്റ്റം യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your Intel NUC 10 Performance NUC10i5FNKN Barebone System. The Intel NUC (Next Unit of Computing) is a small form factor PC kit designed for flexibility and customization. As a barebone system, it requires the user to install memory (RAM), storage (SSD/HDD), and an operating system to become fully functional.

Please read this manual carefully before beginning the installation process to ensure proper setup and operation.

ചിത്രം 1: Intel NUC 10 Performance NUC10i5FNKN Barebone System. This image shows the compact design of the NUC, featuring a black chassis with various ports on the front and ventilation on the side.

2. ബോക്സിൽ എന്താണുള്ളത്?

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• NUC 10 Performance kit - NUC10i5FNKN
• US Cord (Power Adapter)

Note: Memory, storage, and operating system are not included and must be purchased separately.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section guides you through the physical installation of components and initial setup.

3.1. മെമ്മറി (റാം) ഇൻസ്റ്റാൾ ചെയ്യുന്നു.

1. Unscrew the bottom cover of the NUC chassis.
2. Locate the DDR4 SO-DIMM slots on the motherboard.
3. Align the notch on the SO-DIMM module with the notch in the slot.
4. Insert the module at a 45-degree angle and push down until the retaining clips snap into place.
5. Repeat for additional memory modules if applicable.

3.2. Installing Storage (SSD/HDD)

The NUC10i5FNKN supports both M.2 SSDs and 2.5-inch SATA drives.

3.2.1. M.2 SSD ഇൻസ്റ്റലേഷൻ

1. മദർബോർഡിൽ M.2 സ്ലോട്ട് കണ്ടെത്തുക.
2. Remove the small screw at the end of the M.2 slot.
3. സ്ലോട്ടിലേക്ക് ഒരു കോണിൽ M.2 SSD തിരുകുക.
4. Gently push down the SSD and secure it with the screw.

3.2.2. 2.5-inch SATA Drive Installation

1. Mount the 2.5-inch drive into the drive bay bracket (if provided).
2. Connect the SATA data and power cables from the motherboard to the drive.
3. Secure the drive bay bracket within the chassis.

After installing memory and storage, reattach the bottom cover.

3.3. പെരിഫറലുകൾ ബന്ധിപ്പിക്കുന്നു

Connect your monitor, keyboard, mouse, and other necessary devices to the NUC.

ചിത്രം 2: Front panel ports of the Intel NUC 10. This image highlights the front USB 3.1 Gen2 ports (Type-A and Type-C) for connecting various peripherals, along with the power button and headphone jack.

ചിത്രം 3: Rear panel ports of the Intel NUC 10. This image displays the power input (19V), HDMI port, Ethernet port, two USB 3.1 Gen2 Type-A ports, and a USB-C port with Thunderbolt 3 support, allowing for diverse connectivity options.

• നിരീക്ഷിക്കുക: Connect your display to the HDMI port on the rear panel. The NUC supports up to 4096x2304 resolution.
• കീബോർഡ്/മൗസ്: Connect to any available USB ports (front or rear).
• നെറ്റ്‌വർക്ക്: വയർഡ് നെറ്റ്‌വർക്ക് ആക്‌സസിനായി RJ45 പോർട്ടിലേക്ക് ഒരു ഇതർനെറ്റ് കേബിൾ ബന്ധിപ്പിക്കുക.
• ശക്തി: Connect the power adapter to the 19V DC input on the rear panel, then plug the power cord into an electrical outlet.

3.4. ഓപ്പറേറ്റിംഗ് സിസ്റ്റം ഇൻസ്റ്റലേഷൻ

Once all hardware is installed and peripherals are connected, you will need to install an operating system (e.g., Windows 10, Linux). Refer to the operating system's installation guide for detailed steps. You may need to create a bootable USB drive for installation.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. പവർ ഓൺ/ഓഫ്

• പവർ ഓൺ: Press the power button located on the front panel. The power button will illuminate when the system is on.
• പവർ ഓഫ്: Use the operating system's shutdown procedure. Alternatively, press and hold the power button for 4 seconds to force a shutdown (use only when necessary).

ചിത്രം 4: Close-up of the Intel NUC 10 front panel, showing the illuminated power button. This button is used to turn the system on and off.

4.2. Using the SD Card Slot

The NUC 10 Performance features an SDXC card slot with UHS-II support on the left side panel. This allows for easy transfer of photos, videos, and other data from compatible memory cards.

• Insert the SD card into the slot until it clicks into place.
• To eject, push the card in slightly until it springs out.

ചിത്രം 5: വശം view of the Intel NUC 10, highlighting the SDXC card slot with UHS-II support. This slot provides convenient access for reading and writing data from SD cards.

4.3. ബയോസ്/യുഇഎഫ്ഐ സജ്ജീകരണങ്ങൾ

To access the BIOS/UEFI settings, press the F2 key repeatedly during startup. This allows configuration of boot order, system settings, and advanced features.

5. പരിപാലനം

Proper maintenance ensures the longevity and optimal performance of your NUC.

5.1. വൃത്തിയാക്കൽ

• Keep the NUC in a clean, dust-free environment.
• Periodically clean the exterior with a soft, dry cloth.
• Use compressed air to gently clear dust from ventilation openings to maintain proper airflow and cooling. Ensure the system is powered off before cleaning.

5.2. സോഫ്റ്റ്‌വെയർ അപ്‌ഡേറ്റുകൾ

• Regularly update your operating system, drivers, and BIOS/UEFI firmware. Visit the official Intel support website for the latest drivers and firmware for your NUC model.
• Keeping software up-to-date improves system stability, security, and performance.

6. പ്രശ്‌നപരിഹാരം

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു.

6.1. പവർ ഇല്ല

• Ensure the power adapter is securely connected to both the NUC and a working electrical outlet.
• Verify the power cord is fully inserted into the power adapter.
• Test the electrical outlet with another device.

6.2. ഡിസ്പ്ലേ ഔട്ട്പുട്ട് ഇല്ല

• Check that the monitor is powered on and the video cable (HDMI) is securely connected to both the NUC and the monitor.
• മോണിറ്റർ ശരിയായ ഇൻപുട്ട് ഉറവിടത്തിലേക്ക് സജ്ജീകരിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• If using multiple monitors, try connecting only one.
• Reseat the RAM modules to ensure they are properly installed.

6.3. Operating System Not Booting

• Verify that the storage drive (SSD/HDD) is correctly installed and detected in the BIOS/UEFI settings.
• Check the boot order in BIOS/UEFI to ensure the correct drive is selected as the primary boot device.
• If you recently installed a new OS, ensure the installation media was created correctly.

For further assistance, refer to the Intel support webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

7 സ്പെസിഫിക്കേഷനുകൾ

Key technical specifications for the Intel NUC 10 Performance NUC10i5FNKN:

8. വാറൻ്റിയും പിന്തുണയും

8.1. ഉൽപ്പന്ന വാറൻ്റി

This Intel NUC product is covered by Intel's standard limited warranty. For specific terms, conditions, and duration of your warranty, please refer to the warranty information included with your purchase or visit the official Intel webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

8.2. സാങ്കേതിക പിന്തുണ

For technical assistance, driver downloads, firmware updates, and additional documentation, please visit the official Intel Support webസൈറ്റ്:

ഇന്റൽ എൻ‌യുസി പിന്തുണ

When contacting support, have your product model number (NUC10i5FNKN) and serial number ready.