1. ആമുഖം
This manual provides comprehensive instructions for the installation, operation, and maintenance of your FLEXISPOT Gas Spring Monitor Arm F8LB. Designed for single monitors ranging from 17 to 36 inches, this arm enhances your workspace ergonomics and frees up valuable desk space. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
2 സുരക്ഷാ വിവരങ്ങൾ
- Ensure the monitor arm is securely attached to a stable desk surface capable of supporting the combined weight of the arm and your monitor.
- പരമാവധി ഭാര ശേഷി 9 കിലോഗ്രാം (19.8 പൗണ്ട്) കവിയരുത്.
- Keep children and pets away from the monitor arm during installation and adjustment.
- Be cautious of pinch points when adjusting the arm.
- If any parts are missing or damaged, do not attempt to install the product. Contact customer support immediately.
3. പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- മോണിറ്റർ ആം അസംബ്ലി
- വെസ പ്ലേറ്റ്
- ഡെസ്ക് Clamp അടിസ്ഥാനം
- Grommet Mount Base (optional installation method)
- ഹാർഡ്വെയർ കിറ്റ് (സ്ക്രൂകൾ, വാഷറുകൾ, സ്പെയ്സറുകൾ)
- Allen Keys for assembly and tension adjustment
- കേബിൾ മാനേജ്മെന്റ് ക്ലിപ്പുകൾ
4 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ | F8LB |
| നിറം | കറുപ്പ് |
| VESA അനുയോജ്യത | 75x75mm, 100x100mm |
| സ്ക്രീൻ വലിപ്പം അനുയോജ്യത | 17" - 36" |
| ലോഡ് കപ്പാസിറ്റി | 2 - 9 കി.ഗ്രാം (4.4 - 19.8 പൗണ്ട്) |
| ടിൽറ്റ് റേഞ്ച് | -90 ° മുതൽ +15 ° വരെ |
| സ്വിവൽ റേഞ്ച് | 180° |
| ഭ്രമണ ശ്രേണി | 360° |
| മൗണ്ടിംഗ് തരം | ഡെസ്ക് Clamp അല്ലെങ്കിൽ ഗ്രോമെറ്റ് മൗണ്ട് |
| മേശയുടെ കനം (Clamp) | 20-60 മി.മീ |
| മേശയുടെ കനം (ഗ്രോമെറ്റ്) | 25-100 മി.മീ |
| യു.പി.സി | 810054072508 |
Image: Illustration of the monitor arm's extensive angle adjustment capabilities, including 360-degree rotation and a tilt range from -90 to +15 degrees.
5. സജ്ജീകരണം
5.1 Choose Mounting Method
The monitor arm supports two installation methods: desk clamp or grommet mount. Select the method suitable for your desk.
Image: Visual guide illustrating the two available installation options: a C-clamp for securing the arm to the edge of a desk, and a grommet mount for installation through a desk hole.
5.2 Attach Base to Desk
- Cl- നായിamp മൗണ്ട്: C-cl അറ്റാച്ചുചെയ്യുകamp to the edge of your desk and tighten the knob until it is secure. Ensure the desk thickness is between 20-60mm.
- For Grommet Mount: If your desk has a grommet hole (8.5-70mm diameter), use the grommet base and secure it through the hole. Ensure the desk thickness is between 25-100mm.
5.3 മോണിറ്ററിലേക്ക് VESA പ്ലേറ്റ് അറ്റാച്ചുചെയ്യുക
The arm head is removable for easier monitor installation.
- Remove the VESA plate from the monitor arm.
- Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
- Secure the VESA plate to the monitor using the provided screws and washers.
Image: The VESA plate is shown detached from the monitor arm, highlighting the convenience of attaching it directly to the monitor before re-attaching the monitor to the arm.
5.4 Mount Monitor to Arm
- Slide the monitor (with the attached VESA plate) onto the arm head.
- Ensure the monitor is securely locked in place.
Image: A black monitor arm is shown securely clamped to a desk, supporting a black monitor from its rear VESA mount.
5.5 Adjust Gas Spring Tension
The gas spring tension needs to be adjusted to match the weight of your monitor. Use the provided Allen key to turn the adjustment screw on the arm. Turn clockwise to decrease tension (for lighter monitors) or counter-clockwise to increase tension (for heavier monitors) until the monitor stays at the desired height.
5.6 കേബിൾ മാനേജ്മെന്റ്
Route your monitor cables through the integrated cable management channels on the arm to maintain a tidy workspace.
Image: A monitor arm is installed on a wooden desk in an office environment, showcasing a clean setup with a keyboard and mouse, and cables neatly managed.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The FLEXISPOT Gas Spring Monitor Arm allows for flexible adjustment to achieve an ergonomic viewഅനുഭവം.
6.1 ഉയരം ക്രമീകരിക്കൽ
Gently push or pull the monitor up or down to your desired height. The gas spring mechanism will hold it in place once released. This helps alleviate neck, eye, and back strain by allowing you to maintain a comfortable posture.
6.2 ടിൽറ്റ് അഡ്ജസ്റ്റ്മെൻ്റ്
Tilt your monitor up or down to reduce glare and find the optimal viewing angle. The arm supports a tilt range of -90° to +15°.
6.3 Swivel and Rotation
Swivel the monitor left or right up to 180° to share your screen with colleagues or adjust your viewing position. You can also rotate the monitor 360° from landscape to portrait orientation.
Image: The monitor arm is depicted at its maximum extension, demonstrating its wide range of motion and flexibility in positioning the monitor.
6.4 Optimizing Desk Space and Ergonomics
By elevating your monitor, the arm frees up significant desk space. Its design also promotes better posture, reducing discomfort during long work sessions.
Image: A visual comparison illustrating how a monitor arm (right) creates more usable desk space compared to a traditional monitor stand (left).
Image: An illustration demonstrating the improvement in ergonomic posture when using a monitor arm (right) compared to a standard monitor setup (left), reducing strain on the neck and back.
Image: A monitor arm is shown integrated with a standing desk, enabling users to maintain an ergonomic viewing height whether sitting or standing.
7. പരിപാലനം
- എല്ലാ സ്ക്രൂകളും കണക്ഷനുകളും ഇറുകിയതും സുരക്ഷിതവുമാണെന്ന് ഉറപ്പാക്കാൻ പതിവായി പരിശോധിക്കുക.
- Clean the monitor arm with a soft, damp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
- Do not lubricate the gas spring mechanism.
8. പ്രശ്നപരിഹാരം
- Monitor sags or does not stay at desired height: The gas spring tension is too low for your monitor's weight. Increase tension by turning the adjustment screw counter-clockwise with the provided Allen key.
- മോണിറ്റർ നീക്കാൻ പ്രയാസമാണ് അല്ലെങ്കിൽ വളരെ കടുപ്പമുള്ളതാണ്: The gas spring tension is too high. Decrease tension by turning the adjustment screw clockwise.
- Monitor wobbles: Ensure all mounting screws (VESA plate to monitor, arm to base, base to desk) are securely tightened. Check if the desk surface is stable.
- കേബിളുകൾ കുഴപ്പത്തിലാണ്: Utilize the integrated cable management clips and channels on the arm to organize cables.
9. വാറൻ്റിയും പിന്തുണയും
Your FLEXISPOT Gas Spring Monitor Arm F8LB comes with a 1 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ.
If you encounter any issues, have questions, or require assistance, please do not hesitate to contact our customer support team:
ഇമെയിൽ: contact@flexispot.jp
Please provide your purchase details and a description of the issue when contacting support to ensure a prompt resolution.
