EVERYBOT Three-Spin Robot Mop TS300 Instruction Manual

1. ആമുഖം

Thank you for choosing the EVERYBOT Three-Spin Robot Mop. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

Figure 1: EVERYBOT Three-Spin Robot Mop TS300

2. ബോക്സിൽ എന്താണുള്ളത്?

അൺബോക്സിംഗ് ചെയ്യുമ്പോൾ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• EVERYBOT Three-Spin Robot Mop
• ചാർജ്ജിംഗ് തൊട്ടിൽ
• റിമോട്ട് കൺട്രോൾ
• പവർ അഡാപ്റ്റർ
• Mother-Yarn Mop Pads (for intensive mopping)
• Microfiber Mop Pads (for fine dust and polishing)
• വാട്ടർ ടാങ്ക്
• ഉപയോക്തൃ മാനുവൽ

3. സജ്ജീകരണം

3.1 ഉപകരണം ചാർജ് ചെയ്യുന്നു

1. Place the charging cradle against a wall in an open area.
2. Connect the power adapter to the charging cradle and a power outlet.
3. Align the robot mop with the charging cradle. The device will automatically dock and begin charging. The battery indicator lights will illuminate.

3.2 Preparing Mop Pads

1. Select the appropriate mop pads (Mother-Yarn for intensive cleaning, Microfiber for polishing).
2. Moisten the mop pads with water and wring them thoroughly to remove excess water.
3. Attach the moistened pads to the rotating discs on the underside of the robot mop. They attach via Velcro.

3.3 വാട്ടർ ടാങ്ക് നിറയ്ക്കൽ

1. Open the water tank cover located on the top of the robot mop.
2. വാട്ടർ ടാങ്ക് നീക്കം ചെയ്യുക.
3. ശുദ്ധമായ ടാപ്പ് വെള്ളത്തിൽ ടാങ്ക് നിറയ്ക്കുക. Do not add hot water or cleaning detergents to the tank, as this may damage the device or leave residue on your floors.
4. Securely close the water tank cap and reinsert the tank into the robot mop. Close the water tank cover.

Figure 2: Water Tank Filling Guidelines

4. ഓപ്പറേഷൻ

4.1 പവർ ഓൺ/ഓഫ്

• To power on: Press and hold the power button on the device for approximately 3 seconds.
• To power off: Press and hold the power button for approximately 3 seconds.

4.2 ക്ലീനിംഗ് മോഡുകൾ

The EVERYBOT Three-Spin offers 7 selectable cleaning modes via the remote control:

• ഓട്ടോമാറ്റിക് ക്ലീനിംഗ്: Basic mode for efficient room cleaning.
• തീവ്രമായ ശുചീകരണം: Repeats short forward movements and 360-degree rotations for meticulous cleaning.
• Focused Cleaning: Intensively cleans the nearby area based on the robot's current location.
• എഡ്ജ് ക്ലീനിംഗ്: Directs the robot along walls and furniture edges.
• 50-minute Cleaning: Cleans for a set duration, suitable for separate rooms.
• Y-Mode Cleaning: Follows a Y-shaped pattern for thorough coverage.
• മാനുവൽ ക്ലീനിംഗ്: Allows direct control of the robot's movement using the remote.

Figure 3: Remote Control for Mode Selection

Figure 4: Visual Representation of Cleaning Modes

4.3 സ്മാർട്ട് സവിശേഷതകൾ

• അൾട്രാ ക്വയറ്റ് ഓപ്പറേഷൻ: Operates at an ultra-low 43 dB noise level.
• No-Wheel Structure: The 4.4 lb weight provides direct pressure for effective cleaning.
• സ്മാർട്ട് സെൻസറുകൾ: Equipped with 11 anti-collision and fall prevention sensors to navigate safely and avoid obstacles or drops.
• Automatic Water Supply: The 300ml water tank automatically supplies water to the mops to maintain dampനെസ്.

Figure 5: Quiet Operation (43 dB)

Figure 6: Obstacle Avoidance with Smart Sensors

5. പരിപാലനം

5.1 Cleaning Mop Pads

After each use, remove the mop pads. They can be hand-washed with water or machine-washed according to their care instructions. Ensure they are clean and dry before reattaching.

5.2 ക്ലീനിംഗ് സെൻസറുകൾ

Periodically wipe the 11 anti-collision and fall prevention sensors with a soft, dry cloth to ensure optimal performance.

5.3 വാട്ടർ ടാങ്ക് പരിചരണം

Empty any remaining water from the tank after each use. Clean the tank regularly with water to prevent buildup. Do not use harsh chemicals.

6. ട്രബിൾഷൂട്ടിംഗ് ഗൈഡ്

If the red light flashes and error sounds persist, try the following steps:

1. പവർ ഓഫ്: Press the power switch for more than 3 seconds to turn off the device.
2. സെൻസർ മാനേജ്മെന്റ്: Remove any plastic film attached to the sensors. If there is dust or debris on the sensor, gently wipe it with a soft cloth.
3. Attach Mop Properly: Moisten the mop in water and wring it thoroughly. Attach the mop to the rotating disc slot. If the mop is too wet or not properly attached, the product may not operate correctly.

7 സ്പെസിഫിക്കേഷനുകൾ

8. ഉൽപ്പന്ന വീഡിയോകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or to purchase replacement parts, please refer to the official EVERYBOT website or contact customer service. Keep your purchase receipt for warranty claims.