NVX XMICROLOC4 4-ചാനൽ ലൈൻ ഔട്ട്‌പുട്ട് കൺവെർട്ടർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

The NVX XMICROLOC4 is a 4-channel line output converter designed to seamlessly integrate aftermarket amplifiers with factory OEM (Original Equipment Manufacturer) stereo systems. This device allows you to add an amplifier to your vehicle's existing audio setup without replacing the factory head unit, providing enhanced sound quality and power for your car audio system.

പ്രധാന സവിശേഷതകൾ

• High-Powered 4-Channel Output Converter: The NVX XMICROLOC4 is a 4-channel, 600W line output converter (150W per channel) designed to integrate aftermarket amplifiers with factory OEM stereos.
• Premium Audio Performance: Equipped with a premium input circuit that corrects crossover distortion, this converter ensures clear, accurate signal conversion for optimal sound quality.
• Adjustable Outputs for Custom Tuning: The 6:1 step-down ratio with individual adjustable outputs allows for precise control over the audio signal, enabling fine-tuning for balanced sound.
• Built-in Remote Turn-On Trigger: A 12-volt output for amplifier remote turn-on is integrated, enabling easy amplifier activation whenever the stereo is powered on.
• Compact & Easy Installation: The compact design allows for easy installation in tight spaces, making it a practical solution for adding an amplifier to a factory system.

ഉൽപ്പന്നം കഴിഞ്ഞുview

ചിത്രം 1: പ്രധാന ഉൽപ്പന്നം view of the NVX XMICROLOC4, showing the top panel with the NVX logo, gain adjustment screws, and the multi-color wiring harness extending from the unit.

ചിത്രം 2: മുകളിൽ view of the NVX XMICROLOC4, highlighting the four blue gain adjustment screws (labeled 'L' for left and 'R' for right channels) and the NVX branding.

ചിത്രം 3: വശം view of the NVX XMICROLOC4, clearly showing the four RCA output jacks. Two red jacks indicate right channels, and two white jacks indicate left channels for ampലൈഫയർ കണക്ഷൻ.

ഇൻസ്റ്റലേഷൻ ഗൈഡ്

സുരക്ഷാ മുൻകരുതലുകൾ

• Always disconnect the vehicle's negative battery terminal before performing any electrical work to prevent short circuits and damage.
• വൈദ്യുത അപകടങ്ങൾ ഒഴിവാക്കാൻ എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
• ഏതെങ്കിലും ഇൻസ്റ്റാളേഷൻ ഘട്ടങ്ങളെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, ഒരു പ്രൊഫഷണൽ കാർ ഓഡിയോ ഇൻസ്റ്റാളറെ സമീപിക്കുക.

Mounting the XMICROLOC4

Choose a secure, dry location within the vehicle, such as under the dashboard, behind the stereo, or in the trunk. Ensure the location is away from direct heat sources and allows for adequate ventilation. The compact design of the XMICROLOC4 facilitates installation in tight spaces.

വയറിംഗ് കണക്ഷനുകൾ

1. സ്പീക്കർ ലെവൽ ഇൻപുട്ടുകൾ: Connect the speaker wires from your factory stereo's speaker outputs to the corresponding input terminals on the XMICROLOC4's wiring harness. Ensure correct polarity (positive to positive, negative to negative) for each channel (Front Left, Front Right, Rear Left, Rear Right). Refer to your vehicle's wiring diagram for speaker wire identification.
2. RCA ഔട്ട്പുട്ടുകൾ: Connect RCA cables from the XMICROLOC4's RCA output jacks to the input jacks of your aftermarket amplifier. Match the front outputs of the XMICROLOC4 to the front inputs of the amplifier, and the rear outputs to the rear inputs.
3. റിമോട്ട് ഓൺ: Connect the blue 12-volt remote output wire from the XMICROLOC4's harness to the remote turn-on input terminal of your amplifier. This connection will automatically activate your amplifier when the factory stereo is turned on.
4. ഗ്രൗണ്ട് കണക്ഷൻ: Connect the black ground wire from the XMICROLOC4's harness to a clean, unpainted metal surface on the vehicle chassis. A solid ground connection is crucial for optimal performance and to prevent noise.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ക്രമീകരണം നേടുക

The NVX XMICROLOC4 features individual adjustable outputs for each channel, allowing for precise control over the audio signal level. After completing the installation and reconnecting the vehicle's battery:

1. Turn on your factory stereo and aftermarket ampജീവൻ.
2. Set the volume on your factory stereo to approximately 75% of its maximum level.
3. Using a small flat-head screwdriver, slowly adjust the gain controls on the top of the XMICROLOC4 (labeled 'L' and 'R' for each channel pair). Start with the lowest gain setting and gradually increase it until the desired output level is achieved without any audible distortion.
4. The 6:1 step-down ratio helps manage signal levels effectively, ensuring a clean signal to your ampലിഫയർ. ക്രമീകരിക്കുക amplifier's gain settings as needed after setting the XMICROLOC4's gains.

സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 4: Diagram illustrating the dimensions and key specifications of the NVX XMICROLOC4.

ട്രബിൾഷൂട്ടിംഗ്

മെയിൻ്റനൻസ്

The NVX XMICROLOC4 is designed for reliable operation with minimal maintenance. To ensure its longevity and optimal performance:

• Keep the unit free from dust and debris. Use a soft, dry cloth for cleaning.
• യൂണിറ്റിനെ അമിതമായ ഈർപ്പത്തിലോ തീവ്രമായ താപനിലയിലോ എത്തിക്കുന്നത് ഒഴിവാക്കുക.
• സുരക്ഷിതമായി നിലകൊള്ളുന്നുവെന്ന് ഉറപ്പാക്കാൻ എല്ലാ വയറിംഗ് കണക്ഷനുകളും ഇടയ്ക്കിടെ പരിശോധിക്കുക.

വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage, technical support, or service inquiries, please refer to the official NVX website or contact NVX customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.