KAIWEETS KT360A ലേസർ ലെവൽ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in laser radiation exposure or other hazards.

• ലേസർ സുരക്ഷ: Do not point the laser directly into eyes. This product is a Class II laser device, with output power less than 1mW.
• ലേസർ ബീമിലേക്ക് നേരിട്ട് കണ്ണ് എക്സ്പോഷർ ചെയ്യുന്നത് ഒഴിവാക്കുക.
• Do not disassemble the device. Repairs should only be performed by authorized personnel.
• ഉപകരണം കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The KAIWEETS KT360A is a 3x360 green line laser level designed for precise leveling and alignment tasks. It features high visibility green laser lines and self-leveling capabilities, making it suitable for various indoor and outdoor applications.

Image: The KAIWEETS KT360A laser level emitting bright green 360-degree lines.

പ്രധാന സവിശേഷതകൾ:

• 3 x 360° പച്ച ലേസർ ലൈനുകൾ: One horizontal and two vertical lines provide full room coverage for floors, walls, and ceilings.
• ഉയർന്ന ദൃശ്യപരത: Green laser technology offers 4 times better visibility compared to red lasers.
• സെൽഫ്-ലെവലിംഗ് ഫംഗ്ഷൻ: Automatically levels within ±4° range.
• പൾസ് മോഡ്: Allows use with a laser detector (not included) for extended range up to 196ft/60m in bright conditions.
• Individual Line Control: Laser lines can be switched on and off independently.
• ഉൾപ്പെടുത്തിയ ആക്സസറികൾ: Comes with a small adapter for fine adjustment and a telescopic tripod for versatile placement.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• KAIWEETS KT360A Laser Level
• Small Adapter (for fine adjustment)
• Telescopic Tripod (Max height 3.7m/12.18ft)
• Mounting Bracket with 1/4"-20 Mounting Thread and 5/8"-11 Thread Adapter (part of tripod kit)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Image: Complete KAIWEETS KT360A kit, showing the laser level, adapter, and tripod components.

4. സജ്ജീകരണം

4.1 Installing the Laser Level

1. Ensure the laser level is placed on a stable, level surface or mounted securely.
2. The device can be mounted onto a tripod using its standard mounting thread.
3. For fine adjustments, attach the laser level to the provided adapter.

Image: Demonstrates multiple ways of placing the laser level, including on a magnetic bracket and a tripod.

4.2 ട്രൈപോഡ് കൂട്ടിച്ചേർക്കൽ

1. Unfold the tripod legs and extend them to the desired height.
2. Assemble the telescopic pole sections if using the full height.
3. Attach the mounting bracket to the top of the pole.
4. Secure the laser level to the mounting bracket using the 1/4"-20 thread. Use the 5/8"-11 thread adapter if necessary.

Image: The telescopic tripod components, including pole sections, base, and mounting bracket.

Image: The KAIWEETS KT360A laser level mounted on the telescopic tripod, projecting horizontal and vertical lines on a wall.

4.3 Using the Adapter for Fine Adjustment

The small adapter allows for precise positioning of the laser level.

• Attach the laser level to the adapter.
• Use the micro knob on the adapter to rotate the laser level 360° clockwise or counterclockwise for horizontal alignment.
• The adapter also provides X-axis and Y-axis adjustments for fine-tuning the laser line position within a 1 cm range.

Image: The small adapter for the laser level, showing its robust construction and adjustment knobs.

Image: The laser level mounted on the adapter, illustrating its 360-degree rotation, X-axis, and Y-axis fine adjustment capabilities.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 പവർ ഓൺ/ഓഫ്, മോഡ് തിരഞ്ഞെടുക്കൽ

1. പവർ ഓൺ: Slide the main switch to the "ON" position. The laser level will automatically enter self-leveling mode.
2. സ്വയം-ലെവലിംഗ് മോഡ്: When the pendulum is unlocked, the device will self-level. If the tilt angle exceeds 4°, the laser lines will flash rapidly to indicate an out-of-level condition.
3. Manual Mode (Slope Mode): To use the device at an angle, lock the pendulum by sliding the main switch to the "OFF" position while the device is on. The laser lines will remain active but will not self-level, allowing for angled projections.
4. Switching Laser Lines: Press the dedicated buttons on the control panel to cycle through horizontal and vertical laser lines independently.
5. പൾസ് മോഡ്: Activate pulse mode for use with a laser detector in bright outdoor conditions. Refer to the device's specific button for pulse mode activation.
6. പവർ ഓഫ്: Slide the main switch to the "OFF" position to lock the pendulum and power off the device.

Image: The laser level in operation, projecting a horizontal line and two vertical lines, creating a 90-degree cross-section on the wall and floor.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Keep the laser level clean. Use a soft, damp cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• ലെൻസ് കെയർ: Gently clean the laser output windows with a soft, lint-free cloth. Avoid scratching the lenses.
• സംഭരണം: Store the device in its original carrying case in a dry, dust-free environment when not in use.
• ബാറ്ററി: If the device uses removable batteries, remove them during long periods of storage to prevent leakage.
• കാലിബ്രേഷൻ: Regular calibration checks are recommended to ensure accuracy, especially after drops or impacts.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ: KT360A
• ലേസർ ക്ലാസ്: ക്ലാസ് II, <1mW
• Laser Color: പച്ച
• ലേസർ ലൈനുകൾ: 3 x 360° (1 Horizontal, 2 Vertical)
• സ്വയം-ലെവലിംഗ് ശ്രേണി: ±4°
• Pulse Mode Range: Up to 196ft/60m (with detector, not included)
• Tripod Max Height: 3.7മീ / 12.18 അടി
• അഡാപ്റ്റർ ക്രമീകരണം: 360° rotation, X/Y axis fine adjustment (within 1 cm)

9. വാറൻ്റിയും പിന്തുണയും

KAIWEETS provides a 3 വർഷത്തെ വിൽപ്പനാനന്തര സേവനം for the KT360A laser level kit.

For technical support, warranty claims, or any questions regarding your product, please contact KAIWEETS customer service through their official channels or the retailer where the product was purchased.

Please have your model number (KT360A) and purchase information ready when contacting support.