XTRARM TiTon 100 സെ.മീ ടിവി വാൾ മൗണ്ട് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your XTRARM TiTon 100 cm TV Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage to the product or injury.

The XTRARM TiTon wall mount is designed to securely attach medium and large televisions to a wall, offering flexibility in viewing angles through its articulated arm, tilt, swivel, and rotation capabilities.

സുരക്ഷാ വിവരങ്ങൾ

• ഭാരം ശേഷി: Do not exceed the maximum load capacity of 60 kg (132 lbs). Exceeding this limit can result in serious injury or property damage.
• ചുമർ തരം: Ensure the mounting surface can safely support the combined weight of the mount and your television. Consult a professional if unsure about your wall's structural integrity.
• ഇൻസ്റ്റലേഷൻ: Improper installation may cause serious injury. Follow all instructions carefully. If you have any doubts, contact a qualified installer.
• ഉപകരണങ്ങൾ: Use appropriate tools for installation. Wear safety glasses and other protective gear as needed.
• കുട്ടികൾ: ഇൻസ്റ്റലേഷൻ ഏരിയയിൽ നിന്ന് കുട്ടികളെ അകറ്റി നിർത്തുക. ചെറിയ ഭാഗങ്ങൾ ശ്വാസംമുട്ടലിന് കാരണമായേക്കാം.
• കേബിൾ മാനേജുമെന്റ്: Ensure all cables are routed safely and are not pinched or under tension to prevent damage and tripping hazards.

പാക്കേജ് ഉള്ളടക്കം

Verify that all components are present and undamaged before beginning installation. Standard mounting hardware is included.

ചിത്രം 1: കഴിഞ്ഞുview of the XTRARM TiTon 100 cm TV Wall Mount components. This image displays the main articulated arm assembly and the TV mounting plate.

• വാൾ പ്ലേറ്റ് അസംബ്ലി
• ആർട്ടിക്യുലേറ്റഡ് ആം
• ടിവി മൗണ്ടിംഗ് പ്ലേറ്റ്
• Standard Mounting Hardware (screws, anchors, washers, spacers)
• ഡ്രില്ലിംഗ് ടെംപ്ലേറ്റ്
• Bubble Level (often included with standard hardware)

സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 2: Detailed dimensions of the XTRARM TiTon wall mount and its range of motion, including extension, swivel, and tilt capabilities.

ചിത്രം 3: VESA compatibility chart for the XTRARM TiTon mount, indicating supported TV sizes from 42 to 85 inches and various VESA patterns.

ചിത്രം 4: The XTRARM TiTon mount is designed to safely support televisions up to 60 kilograms (132 lbs).

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Before you begin, ensure you have all necessary tools (e.g., drill, stud finder, level, screwdriver, wrench) and that your wall can support the weight. It is recommended to have two people for installation.

1. Determine Wall Type and Location

Identify if your wall is solid concrete, brick, or wood stud. Different wall types require specific anchors and drilling techniques. Use a stud finder to locate wood studs if applicable. Choose a mounting location that allows for optimal viewing angles and movement of the articulated arm.

2. ടിവി ബ്രാക്കറ്റുകൾ ടെലിവിഷനിൽ ഘടിപ്പിക്കുക

1. സ്‌ക്രീൻ കേടുപാടുകൾ തടയുന്നതിന് നിങ്ങളുടെ ടിവി മുഖം മൃദുവായതും വൃത്തിയുള്ളതുമായ ഒരു പ്രതലത്തിൽ ശ്രദ്ധാപൂർവ്വം വയ്ക്കുക.
2. നിങ്ങളുടെ ടിവിയുടെ പിൻഭാഗത്തുള്ള VESA മൗണ്ടിംഗ് ദ്വാരങ്ങൾ തിരിച്ചറിയുക.
3. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's VESA pattern.
4. Attach the vertical TV brackets to the back of your television, ensuring they are securely fastened but not overtightened. The brackets should be centered horizontally on the TV.

3. വാൾ പ്ലേറ്റ് ഭിത്തിയിലേക്ക് ഘടിപ്പിക്കുക

1. Hold the drilling template against the wall at your desired mounting height. Use a level to ensure it is perfectly horizontal. Mark the drill hole locations.
2. Drill pilot holes at the marked locations according to the recommended drill bit size for your wall type and anchors.
3. Insert wall anchors (if required for your wall type).
4. Align the wall plate with the drilled holes and secure it to the wall using the provided lag bolts and washers. Tighten all bolts firmly.

4. Hang TV on Wall Plate

1. With assistance, carefully lift the television with the attached brackets.
2. Hook the TV brackets onto the wall plate assembly. Ensure the TV is securely seated on the mount.
3. Engage any safety locking mechanisms on the TV brackets to prevent accidental dislodgement.

ചിത്രം 5: The XTRARM TiTon TV Wall Mount installed on a wall with a television attached, shown in a retracted position.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The XTRARM TiTon mount offers various adjustments to optimize your viewഅനുഭവം.

Adjusting Extension and Retraction

Gently pull or push the television to extend or retract the articulated arm. The mount allows for a wall distance between 11.4 cm and 100 cm.

ചിത്രം 6: Illustration of the XTRARM TiTon mount's extension capabilities, showing the TV moving from a minimum distance of 114 mm to a maximum of 1000 mm from the wall.

ടിൽറ്റ് ക്രമീകരിക്കുന്നു

The TV can be tilted downwards by 5 degrees and upwards by 15 degrees. Locate the tilt adjustment mechanism (often a lever or knob) on the TV mounting plate, adjust to the desired angle, and secure it.

ചിത്രം 7: Visual representation of the XTRARM TiTon mount's tilt range, allowing for adjustments from -5 degrees to +15 degrees.

Adjusting Swivel and Rotation

The articulated arm allows for up to 180 degrees of swivel, enabling you to turn the TV to face different areas of the room. The TV mounting plate also supports rotation for horizontal compensation or portrait viewing.

ചിത്രം 8: Example of the XTRARM TiTon mount's swivel capability, demonstrating how the TV can be angled up to 90 degrees left or right from the wall.

ചിത്രം 9: The XTRARM TiTon mount allows for a 90-degree rotation of the television, useful for specific viewing orientations or corner installations.

മെയിൻ്റനൻസ്

• പതിവ് പരിശോധനകൾ: Periodically inspect the mount and all fasteners to ensure they remain secure. Retighten any loose screws or bolts.
• വൃത്തിയാക്കൽ: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• ലൂബ്രിക്കേഷൻ: The moving parts are designed for smooth operation. If any movement becomes stiff, a small amount of silicone-based lubricant can be applied to the joints, avoiding contact with electrical components.

ട്രബിൾഷൂട്ടിംഗ്

Problem: TV is not level after installation.

പരിഹാരം: The mount features horizontal compensation. Adjust the leveling screws on the TV mounting plate to achieve a perfectly horizontal alignment. Ensure the wall plate itself was installed level using a bubble level.

Problem: Mount feels loose or unstable.

പരിഹാരം: Immediately remove the TV from the mount. Recheck all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and that anchors are correctly installed. If the issue persists, consult a professional installer.

Problem: Difficulty moving the articulated arm.

പരിഹാരം: Check for any obstructions. Ensure no cables are caught in the joints. A small amount of silicone lubricant can be applied to the pivot points if movement is stiff.

വാറൻ്റിയും പിന്തുണയും

The XTRARM TiTon TV Wall Mount comes with a 5 വർഷത്തെ വാറൻ്റി. സാധാരണ ഉപയോഗത്തിലുള്ള നിർമ്മാണ വൈകല്യങ്ങൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

For technical support, missing parts, or warranty inquiries, please contact XTRARM customer service through the retailer where the product was purchased or visit the official XTRARM webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.

നിർമ്മാതാവ്: യുഎസ്എ2എൻഎൽ ബിവി