Artist Unknown QF-01

Artist Unknown Portable Electric Bidet Sprayer (Model QF-01) - Instruction Manual

Your guide to personal hygiene on the go.

1. ആമുഖം

Thank you for choosing the Artist Unknown Portable Electric Bidet Sprayer. This device is designed to provide a refreshing and thorough cleaning experience, enhancing personal hygiene whether you are at home, traveling, or camping. Its compact, foldable design and dual-pressure modes offer convenience and effectiveness. Please read this manual carefully before use to ensure proper operation and maintenance.

2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

  • വാട്ടർപ്രൂഫ് റേറ്റിംഗ് ഉണ്ടായിരുന്നിട്ടും, പ്രധാന യൂണിറ്റ് ദീർഘനേരം വെള്ളത്തിൽ മുക്കിവയ്ക്കരുത്.
  • Ensure the battery compartment is securely closed before use to prevent water ingress.
  • Use only clean water. Do not use hot water exceeding 122°F (50°C) as this may damage the device or cause burns.
  • കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
  • If the device malfunctions, discontinue use immediately and contact customer support.
  • ഉപകരണം സ്വയം ഡിസ്അസംബ്ലിംഗ് ചെയ്യാനോ നന്നാക്കാനോ ശ്രമിക്കരുത്.

3. പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

  • Portable Bidet Sprayer (Main Unit)
  • വാട്ടർ റിസർവോയർ
  • ഇൻസ്ട്രക്ഷൻ മാനുവൽ
  • ട്രാവൽ പൗച്ച്
  • USB Charging Cable (for rechargeable models, if applicable)

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the components of your portable bidet sprayer:

Diagram showing the components of the portable bidet sprayer, including twist knob, water inlet, exhaust port, battery compartment, and water reservoir.

Figure 1: Product Components (Function)

The bidet features a prism-shaped anti-skid design for comfortable handling and a 180-degree adjustable nozzle for precise cleaning. It is designed with IPX6 waterproof protection, featuring a dual-layer shell to prevent switch malfunction, auto power on/off, and battery damage.

Illustration of the bidet's IPX6 waterproof design, showing a dual-layer shell protecting internal components from water damage.

Figure 2: IPX6 Waterproof Design

5. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps to prepare your bidet for use:

  1. ബാറ്ററികൾ ഇൻസ്റ്റാൾ ചെയ്യുക:
    Locate the battery compartment. Pull up the knob of the battery cover and rotate counter-clockwise to open. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals are correctly aligned as indicated. Close the battery cover by rotating clockwise until secure. (Note: Batteries are not included.)

    Video 1: Battery Installation Guide

  2. ജലസംഭരണി നിറയ്ക്കുക:
    Twist to unlock and pull out the water reservoir from the main unit. Fill the reservoir with clean water up to the 'MAX' scale mark (maximum 180mL). Do not exceed the maximum fill line.

    Video 2: Filling the Water Reservoir and Assembly

  3. Assemble the Bidet:
    Fix the bidet body to the filled water reservoir by aligning and twisting until secure.
  4. നോസൽ ക്രമീകരിക്കുക:
    Open the water pipe (nozzle) by rotating it 180 degrees into the operational position. The spraying nozzle can be rotated 180 degrees for optimal angle.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your portable bidet offers two pressure modes for a personalized cleaning experience:

Image showing the two water pressure levels: Strong (150ML/Min for deep cleaning) and Soft (110ML/Min for sensitive spots).

Figure 3: Two Water Pressure Levels

  1. പവർ ഓൺ:
    ഉപകരണം ഓണാക്കാൻ പവർ ബട്ടൺ ഒരിക്കൽ അമർത്തുക.
  2. Select Pressure Mode:
    The device has two-speed buttons: 'L' for gentle mode and 'H' for strong mode. Press the desired button to activate the spray.
  3. വൃത്തിയാക്കൽ:
    Direct the semi-circular spout towards the desired cleaning area. The 180-degree adjustable nozzle allows for accurate alignment and thorough cleaning without skin damage.
  4. പവർ ഓഫ്:
    Press the power button again to turn off the device. The device also features an automatic shutoff function after 60 seconds of continuous use to conserve battery and water.

വീഡിയോ 3: ഉൽപ്പന്നം കഴിഞ്ഞുview പ്രവർത്തനവും

7. പരിപാലനം

  • വൃത്തിയാക്കൽ:
    After each use, empty any remaining water from the reservoir. The device is IPX6 waterproof, allowing for direct washing under water. Ensure the nozzle is clean and free from debris.
  • സംഭരണം:
    Once clean and dry, fold the nozzle back into its stored position. Store the bidet in the provided travel pouch to maintain its integrity and cleanliness.
  • ബാറ്ററി കെയർ:
    ഉപകരണം ദീർഘനേരം ഉപയോഗിക്കുന്നില്ലെങ്കിൽ, ചോർച്ചയും കേടുപാടുകളും തടയാൻ ബാറ്ററികൾ നീക്കം ചെയ്യുക.

8. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഉപകരണം ഓണാക്കില്ല.ബാറ്ററികൾ ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്തു.Check battery alignment (+/-). Replace with fresh AAA batteries.
ദുർബലമായ ജല സമ്മർദ്ദം.Low battery power; insufficient water in reservoir; nozzle blockage.Replace batteries. Refill water reservoir. Check and clean the nozzle for any obstructions.
വെള്ളം ചോർച്ച.Reservoir not securely attached; damaged seal.Ensure the water reservoir is twisted tightly onto the main unit. Inspect seals for damage.

9 സ്പെസിഫിക്കേഷനുകൾ

  • മോഡൽ നമ്പർ: ക്യുഎഫ്-01
  • അളവുകൾ: 9.7 x 4.33 x 2.16 ഇഞ്ച്
  • ഇനത്തിൻ്റെ ഭാരം: 7.5 ഔൺസ്
  • മെറ്റീരിയൽ: അക്രിലോണിട്രൈൽ ബ്യൂട്ടാഡീൻ സ്റ്റൈറൈൻ (എബിഎസ്)
  • Water Pressure Modes: 2 (Gentle 'L', Strong 'H')
  • നോസൽ: 180-ഡിഗ്രി ക്രമീകരിക്കാവുന്നത്
  • വാട്ടർപ്രൂഫ് റേറ്റിംഗ്: IPX6
  • ഊർജ്ജ സ്രോതസ്സ്: AAA ബാറ്ററികൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)

10. വാറൻ്റിയും പിന്തുണയും

ഈ ഉൽപ്പന്നം എ 1 വർഷത്തെ വാറൻ്റി. If you encounter any problems with your portable electric bidet sprayer, please do not hesitate to contact our customer support team. We are committed to providing a satisfactory solution.

For support, please refer to the contact information provided with your purchase or visit the official Artist Unknown store on Amazon.

അനുബന്ധ രേഖകൾ - ക്യുഎഫ്-01

പ്രീview Redsack Portable Bidet PB-01 User's Manual
User's manual for the Redsack Portable Bidet (Model PB-01), detailing product description, specifications, usage instructions, and cleaning steps for personal hygiene.
പ്രീview TeeJet IC45 സ്പ്രേയർ സോഫ്റ്റ്‌വെയർ റിലീസ് നോട്ടുകൾ: സവിശേഷതകൾ, പരിഹാരങ്ങൾ, അപ്‌ഡേറ്റുകൾ
TeeJet IC45 സ്പ്രേയർ സോഫ്റ്റ്‌വെയറിനായുള്ള വിശദമായ റിലീസ് കുറിപ്പുകൾ, v2.10, v2.02, v2.01, v2.00, v1.96, v1.07, v1.03, v1.02, v1.01 എന്നീ പതിപ്പുകളിലുടനീളമുള്ള പുതിയ സവിശേഷതകൾ, ബഗ് പരിഹാരങ്ങൾ, മെച്ചപ്പെടുത്തലുകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു. DynaJet, TrackMatic, ISOBUS സംയോജനം എന്നിവയെക്കുറിച്ചുള്ള വിവരങ്ങൾ ഉൾപ്പെടുന്നു.
പ്രീview VOVO CS-സ്മാർട്ട് ബിഡെറ്റ് ടോയ്‌ലറ്റ്: ടാങ്ക് എയർ വെന്റ് മാറ്റിസ്ഥാപിക്കലും പരിപാലന ഗൈഡും
ടാങ്ക് എയർ വെന്റ് മാറ്റിസ്ഥാപിക്കൽ, ഡിസ്അസംബ്ലിംഗ്, റീഅസംബ്ലി, റീഇൻസ്റ്റാളേഷൻ നടപടിക്രമങ്ങൾ ഉൾക്കൊള്ളുന്ന VOVO CS-സ്മാർട്ട് ബിഡെറ്റ് ടോയ്‌ലറ്റിനായുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ. കുറഞ്ഞ ജല സമ്മർദ്ദത്തിനുള്ള ട്രബിൾഷൂട്ടിംഗ് ഘട്ടങ്ങൾ ഉൾപ്പെടുന്നു.
പ്രീview AnyTone AT-588 മൊബൈൽ റേഡിയോ ഉപയോക്തൃ മാനുവൽ
AnyTone AT-588 മൊബൈൽ റേഡിയോയ്‌ക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ എന്നിവ ഉൾക്കൊള്ളുന്നു. ഒപ്റ്റിമൽ പ്രകടനത്തിനായി നിങ്ങളുടെ AT-588 എങ്ങനെ സജ്ജീകരിക്കാമെന്നും ഉപയോഗിക്കാമെന്നും അറിയുക.
പ്രീview ഗ്ലേസിയർ ബേ T3204-30 നോൺ-ഇലക്ട്രിക് ബിഡെറ്റ് അറ്റാച്ച്മെന്റ് ഇൻസ്റ്റലേഷൻ ഗൈഡും യൂസർ മാനുവലും
ഗ്ലേസിയർ ബേ T3204-30 പ്ലാസ്റ്റിക് കോൾഡ് വാട്ടർ ബിഡെറ്റ് അറ്റാച്ച്മെന്റ് ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും ഉപയോഗിക്കുന്നതിനുമുള്ള സമഗ്ര ഗൈഡ്. സുരക്ഷാ വിവരങ്ങൾ, സ്പെസിഫിക്കേഷനുകൾ, ഘട്ടം ഘട്ടമായുള്ള ഇൻസ്റ്റാളേഷൻ നിർദ്ദേശങ്ങൾ, പ്രവർത്തന വിശദാംശങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകൾ എന്നിവ ഉൾപ്പെടുന്നു. പിൻഭാഗത്തെയും സ്ത്രീലിംഗത്തെയും വാഷ് മോഡുകൾക്കായി സ്വയം വൃത്തിയാക്കലും ക്രമീകരിക്കാവുന്ന നോസൽ ആംഗിളുകളും ഉൾപ്പെടുന്നു.
പ്രീview Autek QF സീരീസ് ഓഡിയോ ഫിൽട്ടറുകൾ: ഉപയോക്തൃ നിർദ്ദേശങ്ങളും സാങ്കേതിക ഗൈഡും
മോഡൽ QF-1 ഉൾപ്പെടെ Autek QF സീരീസ് ഓഡിയോ ഫിൽട്ടറുകൾ സജ്ജീകരിക്കുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനുമുള്ള സമഗ്ര നിർദ്ദേശങ്ങൾ. പ്രാരംഭ ഹുക്ക്അപ്പ്, ഫിൽട്ടർ ഫംഗ്ഷനുകൾ (പീക്ക്, നോച്ച്, ലോപാസ്), സെലക്ടിവിറ്റി, ഫ്രീക്വൻസി ക്രമീകരണങ്ങൾ, വിവിധ സിഗ്നൽ തരങ്ങൾക്കായുള്ള പ്രായോഗിക ആപ്ലിക്കേഷനുകൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.