Universal Ceiling Fan Remote Control Kit User Manual

ആമുഖം

Thank you for choosing the Aubric Universal Ceiling Fan Remote Control Kit. This kit is designed to convert traditional ceiling fans with lights into remote-controllable units, offering convenience and enhanced functionality. It features 3-speed fan control, light ON/OFF, and dimming capabilities for compatible bulbs. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

• 2 x റിമോട്ട് കൺട്രോൾ
• 2 x റിസീവർ
• 10 x വയർ നട്ട്സ്
• 2 x Remote Wall Mount
• 4 x സ്ക്രൂ
• 4 x Expansion Screw
• 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Image: The complete kit contents, including two remote controls, two receivers, wire nuts, and mounting hardware.

സ്പെസിഫിക്കേഷനുകൾ

Image: Detailed dimensions of the remote control and receiver units.

സുരക്ഷാ വിവരങ്ങൾ

• മുന്നറിയിപ്പ്: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box or circuit breaker before wiring.
• Do not use with wall-mounted fans or exhaust-type fans.
• Ensure the receiver fits within your fan canopy before installation.
• Always follow local electrical codes and regulations. If you are unsure about wiring, consult a qualified electrician.
• The remote control requires a 9V battery, which is not included. Ensure correct polarity when inserting the battery.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. DIP Code Pairing

Before installation, ensure the DIP switch settings on both the remote control and the receiver match. This prevents interference from other remote-controlled devices in your vicinity.

1. Locate the DIP switches on the receiver. These are typically small red switches labeled 1-4.
2. Open the battery compartment of the remote control. The DIP switches are located inside.
3. Set the switches on both the receiver and the remote to the exact same ON/OFF positions. The default code is 0000 (all OFF), which is not recommended due to potential interference.
4. If your fan turns on/off unexpectedly, change the DIP code to a different combination.

Image: Matching DIP switch settings on the remote and receiver for proper pairing.

2. വയറിംഗ് കണക്ഷൻ

IMPORTANT: Turn off power at the circuit breaker before proceeding with wiring.

The installation process does not require removing the light kit or fan blades. Follow the wiring diagram carefully:

• Input Live Wire (Black): Connect to the AC live line from your main power supply.
• Input Neutral Wire (White): Connect to the AC neutral line from your main power supply.
• Output Neutral Wire (White): Connect to the neutral wire of your ceiling fan.
• Light Load Wire (Blue): Connect to the live wire of your fan's light fixture.
• Fan Load Wire (Black): Connect to the live wire of your fan motor.
• Antenna (Brown): This wire is for signal reception; ensure it is not obstructed.

Use the provided wire nuts to secure all connections. Ensure all connections are tight and insulated.

Image: Detailed wiring connection diagram for the receiver.

After wiring, carefully tuck the receiver into the fan canopy, ensuring there is enough space and no wires are pinched. Secure the canopy.

3. Remote Wall Mount Installation

The kit includes a wall mount for convenient storage of your remote control. Use the provided screws and expansion screws to fix the wall mount to a desired location on your wall.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and powered on, you can control your ceiling fan and light using the remote control.

Image: Remote control with labeled buttons for fan speed and light control.

• എച്ച്ഐ: Sets fan speed to High.
• മെഡ്: Sets fan speed to Medium.
• കുറവ്: Sets fan speed to Low.
• OFF (Fan): ഫാൻ ഓഫ് ചെയ്യുന്നു.
• Light Button (Bulb Icon):
  • Press once to turn the light ON/OFF.
  • Press and hold to dim the light (for compatible dimmable bulbs). Release when desired brightness is reached.

Image: Remote control in use, demonstrating wireless operation of a ceiling fan.

അനുയോജ്യത

This universal remote control kit is compatible with most ceiling fan brands, including Hunter, Harbor Breeze, Westinghouse, Honeywell, and others. It is designed for downrod style fans.

Light Bulb Compatibility:

• കൂടെ പ്രവർത്തിക്കുന്നു ജ്വലിക്കുന്ന ഒപ്പം ഹാലൊജെൻ bulbs for dimming functionality.
• കൂടെ പ്രവർത്തിക്കുന്നു dimmable LED/CFL lamps for dimming functionality.
• Non-dimmable LED/CFL lamps will only have ON/OFF functionality.

Image: Visual guide to fan and bulb compatibility, including dimming capabilities.

ട്രബിൾഷൂട്ടിംഗ്

മെയിൻ്റനൻസ്

• മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് റിമോട്ട് കൺട്രോൾ വൃത്തിയാക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• Replace the 9V battery in the remote control when its performance degrades.
• Ensure the receiver area within the fan canopy remains free of dust and debris.

വാറൻ്റിയും പിന്തുണയും

Aubric provides a 30 ദിവസത്തെ പണം തിരികെ നൽകാനുള്ള ഗ്യാരണ്ടി കൂടാതെ എ 1 വർഷത്തെ മാറ്റിസ്ഥാപിക്കൽ വാറന്റി ഈ ഉൽപ്പന്നത്തിന്.

For any issues or inquiries, please contact Aubric customer service. We offer 7 days a week, 24 hours a day online customer service support to assist you effectively.

പിന്തുണയ്ക്ക്, ദയവായി സന്ദർശിക്കുക Aubric Store on Amazon or refer to your purchase documentation for direct contact information.